Journal of Internet of Things and Convergence (사물인터넷융복합논문지)

The Korea Internet of Things Society (한국사물인터넷학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Implementation of a Data-Driven Defect and Linearity Assessment Monitoring System for Electric Power Steering

전동식 파워 스티어링을 위한 데이터 기반 결함 및 선형성 평가 모니터링 시스템의 설계 구현

  • Lawal Alabe Wale (Dept. of AI Convergence, Pukyong National University) ;
  • Kimleang Kea (Dept. of AI Convergence, Pukyong National University) ;
  • Youngsun Han (Dept. of AI Convergence, Pukyong National University) ;
  • Tea-Kyung Kim (Dept. of Marketing Bigdata, Incheon JaeNeung University)
  • Received : 2023.02.03
  • Accepted : 2023.03.03
  • Published : 2023.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

In recent years, due to heightened environmental awareness, Electric Power Steering (EPS) has been increasingly adopted as the steering control unit in manufactured vehicles. This has had numerous benefits, such as improved steering power, elimination of hydraulic hose leaks and reduced fuel consumption. However, for EPS systems to respond to actions, sensors must be employed; this means that the consistency of the sensor's linear variation is integral to the stability of the steering response. To ensure quality control, a reliable method for detecting defects and assessing linearity is required to assess the sensitivity of the EPS sensor to changes in the internal design characters. This paper proposes a data-driven defect and linearity assessment monitoring system, which can be used to analyze EPS component defects and linearity based on vehicle speed interval division. The approach is validated experimentally using data collected from an EPS test jig and is further enhanced by the inclusion of a Graphical User Interface (GUI). Based on the design, the developed system effectively performs defect detection with an accuracy of 0.99 percent and obtains a linearity assessment score at varying vehicle speeds.

최근에는 환경에 대한 인식이 높아지면서 제조 차량에서 전자식 파워 스티어링(EPS)이 조향장치로 채택되는 사례가 증가하고 있다. EPS는 스티어링 파워 향상, 유압 호스 누출 제거 및 연료 소비 감소와 같은 수많은 이점을 제공하지만, 시스템이 움직임에 반응하게 만드는 센서를 요구한다. 이는, 센서의 선형 변동성을 유지하는 것이 스티어링 반응의 안정성에 필수적임을 의미한다. 따라서 EPS의 제어 품질을 보장하기 위해 내부 설계 특성의 변화에 대한 센서의 민감도, 결함 및 선형성을 평가하기 위한 신뢰성 있는 방법이 필요하다. 본 논문은 차량속도 구간 분할을 기반으로 EPS 구성요소 결함과 선형성을 분석하는 데이터 중심 결함 및 선형성 평가 모니터링 시스템을 제안한다. EPS 테스트 지그에서 수집된 데이터를 사용하여 모니터링 시스템의 성능을 검증하였으며, 그래픽 사용자 인터페이스(GUI)를 적용하여 시스템을 개선하였다. 개발된 시스템은 설계를 기반으로 0.99% 정확도의 결함 감지 및 가변적인 차량속도에서 선형성 평가를 효과적으로 수행하였다.

Keywords

Acknowledgement

본 논문은 부경대학교 자율창의학술연구비(2021년)에 의하여 연구되었음.

References

  1. W.C. Ghoneim, et,al."Model-based fault diagnosis and prognosis for Electric Power Steering systems," in Proceedings of IEEE International Conference on Prognostics and Health Management (ICPHM),pp.1-8, 2016,
  2. X. Wang, Y. Zhao, and H. Wang, "Non-conductive Steering Sensor for Electric Power Steering," in Proceedings of the International Conference on Information and Automation, pp.1-6, 2009.
  3. Md. Akhtaruzzaman et al."An Experiment on Electric Power Steering (EPS) System of a Car", Applied Mechanics and Material, pp.4941-4950, 2012.
  4. LEARNING MODEL: Electric Power Steering. In Proceedings of the Exxotest Education, 2007, pp.1-45, 2022.
  5. A, Koji, M, Atsuo, F, Mitsuhiko, & H, Takeshi, "Development of Electric Power Steering Evaluation System." KYB Technical Review, Vol.56, pp.37-42, 2018.
  6. J.-H. Hong and K.-H. Lee, "Automotive ECU Biometric Authentication Using Blockchain," Journal of The Korea Internet of Things Society, Vol. 6, No. 1, pp.39-43, 2020.
  7. H. Akhondi, J. Milimonfared, and K. Malekian, "Performance evaluation of electric power steering with IPM motor and drive system," in 13th International Power Electronics and Motion Control Conference, IEEE, pp. 2071-2075, 2008.
  8. X. Liu, H. Pang, Y. Shang, and W. Wu, "Optimal design of fault-tolerant controller for an electric power steering system with sensor failures using genetic algorithm," Shock and Vibration, Vol. 2018.
  9. Q.Chen, T.Wenfeng, C.Wuwei, A.Qadeer, and W.Yanming. "Model-Based Fault Diagnosis of an Anti-Lock Braking System via Structural Analysis", Sensors, No. 12, 2018.
  10. V. Govender, and S. Miller, 2016. Modelling and position control of an electric power steering system. IFAC-PapersOnLine, 49(11), pp.312-318. https://doi.org/10.1016/j.ifacol.2016.08.047
  11. P-P. Du, H. Su and G-Y. Tang, "Friction compensation control for electric power steering systems," 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems (IESES), pp.212-217, 2018.
  12. A. Marouf, M. Djemai, C. Sentouh, and P. Pudlo, "A new control strategy of an electric-power-assisted steering system," IEEE Transactions on Vehicular Technology, Vol.61, No.8, pp.3574-3589, 2012.
  13. K. Yamamoto, D. Koenig, O. Sename, and P. Moulaire, "A new control design for an optimized electric power steering system," in IFAC WC 2017-20th IFAC World Congress, 2017.6.
  14. X. Zheng, L. Zhu, J. Luo, C. Liu, and X. Ji, "Simulation analysis of electric power steering system (EPS) test platform," Journal of Physics: Conference Series, vol. 1732, no. 1, p. 012193, IOP Publishing, 2021.
  15. K. J. Lee, K. H. Lee, C. Moon, H. J. Chang, and H. S. Ahn, "Design and development of a functional safety compliant electric power steering system," Journal of Electrical Engineering and Technology, Vol.10, No.4, pp.1915-1920, 2015. https://doi.org/10.5370/JEET.2015.10.4.1915
  16. H. Akhondi, J. Milimonfared, and K. Malekian, "Performance evaluation of electric power steering with IPM motor and drive system," in Proceedings of the 13th International Power Electronics and Motion Control Conference, pp.2071-2075, 2008.
  17. B.Shyrokau, et.al "The effect of steering-system linearity, simulator motion, and truck driving experience on steering of an articulated tractor-semitrailer combination," Applied Ergonomics, Vol.71, pp.17-28, 2018. https://doi.org/10.1016/j.apergo.2018.03.018
  18. T. Kim, "Smart Recycle Bin based on IoT," Journal of IoT Convergence, Vol.6, No.1, pp.17-22, 2020 https://doi.org/10.31152/JB.2021.11.6.4.17
  19. H-S Lee. "A method for optimizing lifetime prediction of a storage device using the frequency of occurrence of defects in NAND flash memory" Journal of IoT Convergence, Vol.7, No.4, pp.9-14, 2021.
  20. T-K Kim. "Study on Video Content Delivery Scheme for Mobile Vehicles" Journal of Internet of Things and Convergence Vol.7, No.2 pp.41-45, 2021.
  21. DPECO Inc.www.dpeco.com