DOI QR코드

DOI QR Code

Numerical analysis of an innovative expanding pile under static and dynamic loading

  • Abdullah Cheraghi (Department of Civil Engineering, Science and Research Branch, Islamic Azad University) ;
  • Amir K. Ghorbani-Tanha (School of Civil Engineering, College of Engineering, University of Tehran)
  • Received : 2021.10.08
  • Accepted : 2023.01.31
  • Published : 2023.02.25

Abstract

Designing pile foundations subjected to the uplift forces such as buildings, oil platforms, and anchors is becoming increasingly concerned. In this paper, the conceptual design of a new type of driven piles called expanding pile is presented and assessed. Some grooves have been created in the shaft of the novel pile, and some moveable arms have been designed at the pile tip. At first, static analyses using the finite element method were performed to evaluate the effectiveness of the innovative pile on the axial bearing capacity. Then its effect on seismic behavior of moment frame is considered. Results show that the expanding arms were provided an ideal anchorage system because of the soil's noticeable locking-up effect increasing uplift bearing capacity. For example at the end of the static tensile loading procedure, displacement decrement up to 55 percent is observed. In addition, comparing the uplift bearing capacity of the usual and new pile with different lengths in sand and clay layers shows noticeable effect and sharp increase up to about two times especially in longer piles. Besides, a sensible reduction in the seismic response and the stresses in the beam-column connection between 23-36 percent are achieved that ensures better seismic behavior of the structures.

Keywords

References

  1. ABAQUS Finite Element Analysis Program. (2010), User's Manual. Version 6.10.1. 
  2. Azzam, W. and Elwakil, A. (2017), "Model sudy on the performance of single-finned pile in sand under tension loads", Int. J. Geomech., 17(3). https://doi.org/10.1061/(ASCE)GM.1943-622.0000761. 
  3. Basha, A. Azzam, W. (2018), "Uplift capacity of single pile embedded in partially submerged sand", KSCE J. Civil Eng., 22, 4882-4890. https://doi.org/ 10.1007/s12205-017-1715-2. 
  4. Das, B.M. (2010), Principle of Foundation Engineering, 7th Edition, Cengage Learning, Sacramento, USA. 
  5. Faizi, K., Jahed Armaghani, D., Sohaei, H., Safuan, A., Rashid, A., and Nazir, R. (2015), "Deformation model of sand around short piles under pullout test", Measurement, 63, 110-119. https://doi.org/10.1016/j.measurement.2014.11.028. 
  6. Fakher, A. (1993), Foundation Construction, Jahad Daneshgahi, Tehran, Iran. [In Persian] 
  7. Li, X.Y., Bai, X.Y. and Zhang, M.Y. (2019), "Study on bearing capacity characteristics of rock socketed short pile in weathered rock site", J. Eng. Res., 7(3), 76-89. 
  8. Lu, W. and Zhang, G. (2018), "Influence mechanism of vertical-horizontal combined loads on the response of a single pile in sand", Soils Found., 58, 1228-1239. https://doi.org/10.1016/j.sandf.2018.07.002. 
  9. Gaaver, K.E. (2013), "Uplift capacity of single piles and pile groups embedded in cohesion less soil", Alexandria Eng. J., 52(3), 365-372. https://doi.org/10.1016/j.aej.2013.01.003. 
  10. Lin, C.H. and Jiang, W. (2019), "Evaluation of vertical effective stress and pile tension capacity in sands considering scour-hole dimensions", Comput. Geotech., 105, 94-98. https://doi.org/10.1016/j.compgeo.2018.09.013. 
  11. Nakai, T., Shahin, H.M., Zhang, F., Hinokio, M., Kikumoto, M., Yonaha, S. and Nishio, A. (2010), "Bearing capacity of reinforced foundation subjected to pull out loading in 2D and 3D conditions", Geotext. Geomembranes, 28(3), 268-280. https://doi.org/10.1016/j.geotexmem.2009.09.013. 
  12. Nazir, A. and Nasr, A. (2013), "Pullout capacity of batter pile in sand", J. Adv. Res., 4(2), 147-154. https://doi.org/10.1016/j.jare.2012.04.001. 
  13. Wang, L., Zhang, P., Ding, H., Tian, Y. and Qi, X. (2020), "The uplift capacity of single-plate helical pile in shallow dense sand including the influence of installation", Mar. Struct., 71. https://doi.org/10.1016/j.marstruc.2019.102697.
  14. Park, S., Kim, J., Kim, S., Park, J., Kwak, K. and Kim, D. (2021), "Centrifuge modelling of rock-socketed drilled shafts under uplift load", Geomech. Eng., 24(5), 431-441. https://doi.org/10.12989/gae.2021.24.5.431. 
  15. Sakr, M.A., Nazir, A., Azzam, W.R. and Sallam, A. (2020), "Model study of single pile with wings under uplift loads", Appl. Ocean Res., 100. https://doi.org/10.1016/j.apor.2020.102187. 
  16. Xing, H., Kim, J., Zhanh, H., Liu, L. and Luo, Y. (2021), "Effect of slope with overburden layer on the bearing behavior of large-diameter rock-socketed piles", Geomech. Eng., 24(4), 389-397. https://doi.org/10.12989/gae.2021.24.4.389.