DOI QR코드

DOI QR Code

Synthesis of Polyimide Derived from 4-Methyl-1,2-phenylene Bis(4-aminobenzoate) and 4,4'-Hexafluoroisopropylidenediphthalic Anhydride

  • Byung Hyun Ahn (Department of Material Engineering, Pukyong National University)
  • Received : 2023.02.01
  • Accepted : 2023.02.11
  • Published : 2023.03.31

Abstract

Aromatic diamine containing ortho catenation and methyl group was synthesized from 4-methyl catechol and 4-nitrobenzoyl chloride. Subsequently, a poly(amic acid) was prepared by reacting 4-methyl-1,2-phenylene bis(4-aminobenzoate) with 4,4'-hexafluoroisopropylidenediphthalic anhydride (6FDA). The resulting poly(amic acid) was transformed into a polyimide through chemical imidization. The polyimide formed was soluble in N-methyl-2-pyrrolidone (NMP) and could be cast into a flexible, transparent film. Furthermore, the polyimide exhibited a 5% weight loss at 380 ℃ in the nitrogen atmosphere.

Keywords

Acknowledgement

This work was supported by a Research Grant of Pukyong National University (2021 year).

References

  1. K. L. Mittal, "Polyimides: Synthesis, Characterization and Application, vol.I", Plenum Press, New York, 1983.
  2. D. Wilson, H. D. Stenzenberger, and P. M. Hergenrother, "Polyimides", Blackie, London 1990.
  3. R. R. Tummala and E. J. Rymaszewski, "Microelectronics Packaging Handbook", van Nostand Reinhold, New York, 1989.
  4. N. Hong, R. A. Synowicki, and J. N. Hilfiker, "Mueller matrix characterization of flexible plastic substrates", Appl. Surf. Sci., 421, 518 (2017).
  5. Z. X. Kang, Y. Zhang, and M. Q. Zhou, "AgNPs@CNTs/Ag hybrid films on thiolated PET substrate for flexible electronics", Chem. Eng. J., 368, 223 (2019).
  6. M. D. Mamo, E.-S. Shin, and Y.-Y. Noh, "Self-aligned patterning of conductive films on plastic substrates for electrodes of flexible electronics", J. Mater. Chem. C, 5, 10900 (2017).
  7. S. Cui, Z. Mei, Y. Zhang, H. Liang, and X. Du, "Room-temperature fabricated amorphous Ga2O3 high-response-speed solar-blind photodetector on rigid and flexible substrates", Adv. Opt. Mater., 5, 1700454 (2017).
  8. T. Adachi, S. S. Latthe, S. W. Gosavi, N. Roy, N. Suzuki, H. Ikari, K. Kato, K. I. Katsumata, K. Nakata, M. Furudate, T. Inoue, T. Kondo, M. Yuasa, A. Fujishima, and C. Terashima, "Photocatalytic, superhydrophilic, self-cleaning TiO2 coating on cheap, light-weight, flexible polycarbonate substrates", Appl. Surf. Sci., 458, 917 (2018).
  9. L. Ai, J. Zhang, X. Li, X. Zhang, Y. Lu, and W. Song, "Universal low-temperature process for preparation of multifunctional high-performance antireflective mesoporous silica coatings on transparent polymeric substrates", ACS Appl. Mater. Interfaces, 10, 4993 (2018).
  10. M. Hasegawa, T. Hirai, T. Ishigami, S. Takahashi, and J. Ishii, "Optically transparent aromatic poly(ester imide)s with low coefficients of thermal expansion. 2: Effect of the introduction of alkyl-substituted p-biphenylene units", Polym. Int., 67, 431 (2018).
  11. D. J. Liaw, K. L. Wang, and F. C. Chang, "Novel organosoluble poly(pyridine-imide) with pendent pyrene group: Synthesis, thermal, optical, electrochemical, electrochromic, and protonation characterization", Macromolecules, 40, 3568 (2007).
  12. Y. Liu, J. Guo, J. Wang, X. Zhu, D. Qi, W. Li, and K. Shen, "A novel family of optically transparent fluorinated hyper-branched polyimides with long linear backbones and bulky substituents", Eur. Polym. J., 125, 109526 (2020).
  13. N. Mushtaq, Q. Wang, G. Chen, B. Bashir, H. Lao, Y. Zhang, L. R. Sidra, and X. Fang, "Synthesis of polyamideimides with different monomer sequence and effect on transparency and thermal properties", Polymer, 190, 122218 (2020).
  14. Z. Chen, S. Zhang, Q. Feng, Y. Wu, S. Liu, and J. Zhao, "Improvement in mechanical and thermal properties of transparent semi-aromatic polyimide by crosslinking", Macromol. Chem. Phys., 221, 2000085 (2020).
  15. G. C. Eastmond and J. Paprotny, "Synthesis of bis(ether anhydride)s for poly(ether imide)s having 1,2-linked units by nitrodisplacement with catechol derivatives", Macromolecule, 28, 2140 (1995).
  16. G. C. Eastmond, J. Paprotny, and R. S. Irwin, "Melt-process-able poly(ether imide)s based on catechol bis(ether anhydride)", Macromolecule, 29, 1382 (1996).
  17. S. H. Hsiao, C. P. Yang, and S. H. Chen, "Synthesis and properties of ortho-linked aromatic polyimides based on 1,2-bis(4-aminophenoxy)-4-tert-butylbenzene", J. Polym. Sci. Part A: Polym. Chem., 38, 1551 (2000).
  18. A. K. Misra, G. Tesoro, G. Tesoro, G. Haugham, and S. M. Pendharkar, "Synthesis and properties of some new fluorine-containing polyimides", Polymer, 33, 1078 (1992).