DOI QR코드

DOI QR Code

A study on the seismic performance of reinforced concrete frames with dry stack masonry wall using concrete block

  • Joong-Won Lee (Department of Architecture, Shin Ansan University) ;
  • Kwang-Ho Choi (Department of Architectural Engineering, Namseoul University)
  • 투고 : 2022.12.02
  • 심사 : 2023.02.28
  • 발행 : 2023.03.25

초록

Currently, many studies are underway at home and abroad on the seismic performance evaluation and dry construction method of the masonry structure. In this study, a dry stack masonry wall system without mortar using concrete blocks is proposed, and investigate the seismic performance of dry filling wall frames through experimental studies. First, two types of standard blocks and key blocks were designed to assemble dry walls of concrete blocks. And then, three types of experiments were manufactured, including pure frame, 1/2 height filling wall frame, and full height filling wall frame, and cyclic load experiments in horizontal direction were performed to analyze crack patterns, load displacement history, rebar deformation yield, effective stiffness change, displacement ductility, and energy dissipation capacity. According to the experimental results, the full height filling wall frame had the largest horizontal resistance against the earthquake load and showed a high energy dissipation capacity. However, the 1/2 height filling wall frame requires attention because the filling wall constrains the effective span of the column, limiting the horizontal displacement of the frame. In addition, the concrete block was firmly assembled in the vertical direction of the wall as the horizontal movement between the concrete blocks was allowed within installation margin, and there was no dropping of the assembled concrete block.

키워드

과제정보

The research described in this paper was financially supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2021R1F1A1046578)

참고문헌

  1. Ali, M., Gultom, R.J. and Chouw, N. (2012), "Capacity of innovative interlocking blocks under monotonic loading", Constr. Build. Mater., 37, 812-821. https://doi.org/10.1016/j.conbuildmat.2012.08.002.
  2. Cho, W.S., Lee, S.H., Chung, L., Kim, H.J., Kim, S.J. and Yu, E.J. (2012), "Seismic performance evaluation of reinforced concrete frame with unreinforced masonry infill", J. Arch. Inst. Korea Struct. Constr., 28(3), 31-41. https://doi.org/10.5659/JAIK_SC.2012.28.3.31.
  3. Guojue, W., Yingmin, L., Nina, Z. and Ingham, J.M. (2017), "Testing and modelling the in-plane seismic response of clay brick masonry walls with boundary columns made of precast concrete interlocking blocks", Eng. Struct., 131, 513-529. https://doi.org/10.1016/j.engstruct.2016.10.035.
  4. Kim K.M., Oh, S.H., Choi, K.Y., Lee, J.H. and Park, B.C. (2013), "Quantitative damage index of RC columns with non-seismic details", J. Korea Inst. Struct. Maint. Insp., 17(6), 11-20. http://doi.org/10.11112/jksmi.2013.17.6.011.
  5. Kim, H.G., Lee, Y.J., Kim, M.J., An, J.H. and Kim, K.H. (2020), "Lateral load resistance of non-seismic detailed reinforced concrete frames with lightweight concrete blocks", J. Korea Concrete Inst., 32(4), 379-386. https://doi.org/10.4334/JKCI.2020.32.4.379.
  6. Kim, J.K., Seo, C.H., Ahn, J.M. and Shin, S.W. (2011), "Seismic resistance performance of RC infilled wall with steel honeycomb system", J. Arch. Inst. Korea Struct. Constr., 27(12), 3-10.
  7. Kim, M.S., Choi, H.S., Song, S.E. and Lee, Y.H. (2013), "Seismic capacity of reinforced concrete frames retrofitted with H-beam frame", J. Earthq. Eng. Soc. Korea, 17(3), 127-132. https://doi.org/10.5000/EESK.2013.17.3.127.
  8. Korean Building Code and Commentary (2016), Architectural Institute of Korea, Seoul, Korea.
  9. Korean Industrial Standards (2022), Korean Standards and Certifications; Korean Agency for Technology and Standards, https://www.standard.go.kr/, Eumseong-gun, Chungcheongbukdo, Korea.
  10. Lee, J.H. (2005), "Seismic capacity and seismic retrofitting of low- rise buildings", Ph.D. Dissertation, Kwangwoon University, Seoul, Korea.
  11. Lin, K., Totoev, Y.Z., Liu, H.J. and Page, A.W. (2014), "Modeling of dry-stacked masonry panel confined by reinforced concrete frame", Arch. Civil Mech. Eng., 14, 497-509. https://doi.org/10.1016/j.acme.2013.12.006.
  12. Liu, H., Liu, P., Lin, K. and Zhao, S. (2016), "Cyclic behavior of mortarless brick joints with different interlocking shapes", Mater., 9(3), 1-12. https://doi.org/10.3390/ma9030166.
  13. Martinez, M. and Atamturktur, S. (2019), "Experimental and numerical evaluation of reinforced dry-stacked concrete masonry walls", J. Build. Eng., 22, 181-191. https://doi.org/10.1016/j.jobe.2018.12.007.
  14. Ngapeya, G.G.C. and Waldmann, D. (2020), "Experimental and analytical analysis of the load-bearing capacity Pu of improved dry-stacked masonry", J. Build. Eng., 27, 1-15. https://doi.org/10.1016/j.jobe.2019.100927.
  15. Ngapeya, G.G.C., Waldmann, D. and Scholzen, F. (2018), "Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls", Constr. Build. Mater., 165, 898-913. https://doi.org/10.1016/j.conbuildmat.2017.12.183.
  16. Priestley, M.J.N., Seible, F. and Calvi, M. (1996), Seismic Design Retrofit of Bridges, John Wiley and Sons, New York, NY, USA.
  17. Sanada, Y., Yamauchi, N., Takahashi, E., Nakano, Y. and Nakamura, Y. (2008), "Interlocking block infill capable of resisting out-of-plane loads", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October.
  18. Sokairge, H., Rashad, A. and Elshafie, H. (2017), "Behavior of post-tensioned dry-stack interlocking masonry walls under out of plane loading", Constr. Build. Mater., 133, 348-357. https://doi.org/10.1016/j.conbuildmat.2016.12.071.
  19. Sung, H.S. and Kang, T.H.K. (2019), "Performance of masonryinfilled reinforced concrete frames retrofitted with highperformance materials", J. Korea Concrete Inst., 31(5), 449-458. https://doi.org/10.4334/JKCI.2019.31.5.449.
  20. Thanoon, W.A.M., Alwathaf, A.H., Noorzaei, J., Jaafar, M.S. and Abdulkadir, M.R. (2008), "Finite element analysis of interlocking mortarless hollow block masonry prism", Comput. Struct., 86(6), 520-528. https://doi.org/10.1016/j.compstruc.2007.05.022.
  21. Totoev, Y.Z and Lin, K. (2012), "Frictional energy dissipation and damping capacity of framed semi-interlocking masonry infill panel", Proceedings of the 15th international Bric and Block Masonry Conference, Florianopolis, Brazil, June.