대한치과보철학회지 (The Journal of Korean Academy of Prosthodontics)

  • 제61권1호
  • /
  • Pages.63-72
  • /
  • 2023
  • /
  • 0301-2875(pISSN)
  • /
  • 2005-3789(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Computer-guided implant surgery를 활용한 상악 무치악 환자의 전악 임플란트고정성 보철물 수복 증례

Full mouth implant-supported fixed prosthesis restoration of an edentulous maxillary patient using computer-guided implant surgery

  • Min-tae Lee (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Sung Yong Kim (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Sun-Young Yim (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Yong-Sang Lee (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Keun-Woo Lee (Department of Prosthodontics, Veterans Health Service Medical Center) ;
  • Seong-A Kim (Department of Prosthodontics, Veterans Health Service Medical Center)
  • 투고 : 2022.09.30
  • 심사 : 2022.10.20
  • 발행 : 2023.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

완전 무치악에서 전악 임플란트 고정성 수복물로 구강회복 치료를 진행할 경우, 해당 악궁의 해부학적 상황과 대합치와의 관계를 고려하여 최종 보철물의 형태와 위치를 결정하는 과정과 이에 따라 다수의 임플란트를 계획된 방향과 각도로 식립하는 과정은 매우 중요하다. 본 증례는 기존 의치의 불편감으로 내원한 상악 무치악 환자를 computer-guided surgery를 통해 상부 보철물에 기반하여 이상적으로 계획된 위치에 임플란트를 식립하였다. 이를 통해 상악 전악 임플란트 고정성 보철물을 제작하여 구강 회복을 진행한 치료로 환자와 술자 모두 기능 및 심미적으로 만족할만한 결과를 얻었기에 이를 보고하고자 한다.

When oral restoration is performed with a full mouth implant-supported fixed restoration in an edentulous patient, it is very important to determine the shape and position of the definitive prosthesis in consideration of the anatomical state and the relationship with the antagonist, and the process of placing multiple implants in the planned direction and angle is very important. In this case, implants were ideally planned based on an upper prosthesis through a computer-guided surgical procedure for an edentulous maxillary patient who visited due to discomfort in the existing denture. Through this, we would like to report this because we obtained satisfactory functional and esthetic results for both the patient and the operator with the treatment of oral restoration by manufacturing a fixed prosthesis for maxillary and full jaw implants.

키워드

참고문헌

  1. Misch CE. Dental implants prosthetics. 2nd ed. St. Louis: Elseiver; Mosby; 2015. p. 11. 
  2. Harris BT, Chen L, Lin WS. Digital imaging and prosthetic-driven implant planning: efficient, accurate, and reliable treatment. Compend Contin Educ Dent 2017;38:492-4. 
  3. Preston JD. A systematic approach to the control of esthetic form. J Prosthet Dent 1976;35:393-402.  https://doi.org/10.1016/0022-3913(76)90006-8
  4. Al Mortadi N, Eggbeer D, Lewis J, Williams RJ. CAD-CAM/AM applications in the manufacture of dental appliances. Am J Orthod Dentofacial Orthop 2012;142:727-33.  https://doi.org/10.1016/j.ajodo.2012.04.023
  5. Azari A, Nikzad S. Computer-assisted implantology: historical background and potential outcomes-a review. Int J Med Robot 2008;4:95-104.  https://doi.org/10.1002/rcs.188
  6. Younes F, Cosyn J, De Bruyckere T, Cleymaet R, Bouckaert E, Eghbali A. A randomized controlled study on the accuracy of free-handed, pilot-drill guided and fully guided implant surgery in partially edentulous patients. J Clin Periodontol 2018;45:721-32.  https://doi.org/10.1111/jcpe.12897
  7. Lee SJ, Gallucci GO. Digital vs. conventional implant impressions: efficiency outcomes. Clin Oral Implants Res 2013;24:111-5.  https://doi.org/10.1111/j.1600-0501.2012.02430.x
  8. Kim KR, Seo KY, Kim S. Conventional open-tray impression versus intraoral digital scan for implant-level complete-arch impression. J Prosthet Dent 2019;122:543-9.  https://doi.org/10.1016/j.prosdent.2018.10.018
  9. Lee H, So JS, Hochstedler JL, Ercoli C. The accuracy of implant impressions: a systematic review. J Prosthet Dent 2008;100:285-91.  https://doi.org/10.1016/S0022-3913(08)60208-5
  10. Papaspyridakos P, Chen CJ, Gallucci GO, Doukoudakis A, Weber HP, Chronopoulos V. Accuracy of implant impressions for partially and completely edentulous patients: a systematic review. Int J Oral Maxillofac Implants 2014;29:836-45.  https://doi.org/10.11607/jomi.3625
  11. Kaleli N, Sarac D. Influence of porcelain firing and cementation on the marginal adaptation of metal-ceramic restorations prepared by different methods. J Prosthet Dent 2017;117:656-61.  https://doi.org/10.1016/j.prosdent.2016.08.016
  12. Nesse H, Ulstein DM, Vaage MM, Oilo M. Internal and marginal fit of cobalt-chromium fixed dental prostheses fabricated with 3 different techniques. J Prosthet Dent 2015;114:686-92.  https://doi.org/10.1016/j.prosdent.2015.05.007
  13. Jung JK. An evaluation of the gap sizes of 3-unit fixed dental prostheses milled from sintering metal blocks. BioMed Res Int 2017;2017:7847930. 
  14. Sadr SM, Ahmadi E, Tabatabaei MH, Mohammadi S, Atri F. Comparison of internal fit of metal-ceramic crowns in CAD-CAM and lost-wax techniques in all fabrication stages through replica weighting, triple scanning, and scanning electron microscope. Clin Exp Dent Res 2022;8:763-70.  https://doi.org/10.1002/cre2.529
  15. Ahmadi E, Tabatabaei MH, Sadr SM, Atri F. Comparison of the marginal discrepancy of PFM crowns in the CAD-CAM and lost-wax fabrication techniques by triple scanning. Dent Med Probl 2020;57:417-22.  https://doi.org/10.17219/dmp/125532
  16. Rilo B, da Silva JL, Mora MJ, Santana U. Guidelines for occlusion strategy in implant-borne prostheses. A review. Int Dent J 2008;58:139-45.  https://doi.org/10.1111/j.1875-595X.2008.tb00189.x
  17. Kim Y, Oh TJ, Misch CE, Wang HL. Occlusal considerations in implant therapy: clinical guidelines with biomechanical rationale. Clin Oral Implants Res 2005;16:26-35. https://doi.org/10.1111/j.1600-0501.2004.01067.x