한국건설관리학회논문집 (Korean Journal of Construction Engineering and Management)

  • 제24권1호
  • /
  • Pages.21-30
  • /
  • 2023
  • /
  • 2005-6095(pISSN)
  • /
  • 2465-9703(eISSN)
한국건설관리학회 (Korea Institute of Construction Engineering and Management)
권호 표지
DOI QR코드

DOI QR Code

대기행렬을 적용한 승차 구매점의 정량적인 대기열 산정과 개선방안

Quantitative Queue Estimation and Improvement of Drive-Through with Queuing

  • 이승원 (한양대학교 건축공학과) ;
  • 허승하 (한양대학교 건축공학과) ;
  • 윤경일 (한양대학교 건축공학과) ;
  • 김재준 (한양대학교 건축공학과)
  • Lee, SeungWon (Department of Architectural Engineering, Hanyang University) ;
  • Huh, SeungHa (Department of Architectural Engineering, Hanyang University) ;
  • Yoon, KyoungIl (Department of Architectural Engineering, Hanyang University) ;
  • Kim, JaeJun (Department of Architectural Engineering, Hanyang University)
  • 투고 : 2022.09.27
  • 심사 : 2022.12.26
  • 발행 : 2023.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

승차 구매점을 찾는 고객의 긴 대기열로 인해 과도한 민원과 교통체증이 발생하였다. S사는 대기열을 줄이기 위해 DT Pass를 권장하고 있다. 이에 본 연구는 대기행렬 모형을 사용하여 하나의 서버로 운영하고 있는 매장을 두 개의 서버로 증량한 후, DT와 DT Pass로 구분하여 성능 개선을 확인하였다. 그 후, 대기행렬 모형을 통해 도출한 L값과 각 매장이 구비하고 있는 매장 내 머무를 수 있는 차량의 대기 공간의 대수를 비교하여 추가로 구비해야 할 차량의 대기 공간의 대수를 산정하였다. 이를 통해 본 연구에서 도출된 결과를 바탕으로 향후 생길 매장의 매장 내 머무를 수 있는 차량의 대기 공간의 대수를 산정하는데 타당성을 검증한다.

Excessive complaints and traffic jams occurred as customers who visited the Drive-thru waited in a long line. Company S recommends DT Pass to reduce the queues. Therefore, this study confirmed the improvement in performance of the queue increasing the number of stores operated by two servers insteaol of one using a queue model. And then confirmed performance improvement by dividing them into DT and DT Pass. After that, the L value derived through the queue model and the number of queues in each store were compared to calculate the number of queues to be additionally provided. Through this, the validity of selecting the minimum number of queues in the future is verified based on the results derived in this study.

키워드

참고문헌

  1. Alnowibet, K.A., Khireldin, A., Abdelawwad, M., and Mohamed, A.W. (2022). "Airport terminal building capacity evaluation using queuing system." Journal of Alexandria Engineering, 61(12), pp. 10109-10118. https://doi.org/10.1016/j.aej.2022.03.055
  2. Anvuur, A.M., and Kumaraswamy, M.M. (2016). "Effects of teamwork climate on cooperation in crossfunctional temporary multi-organization workgroups." Journal of Construction Engineering and Management, 142(1), 04015054.
  3. Ballesteros-Perez, P., Phua, F.T.T., and Mora-Melia, D. (2019). "Human resource allocation to multiple projects based on members' expertise, group heterogeneity and social cohesion." Journal of Construction Engineering and Management, 145(2).
  4. Brammer, S., Branicki, L., and Linnenluecke, M.K. (2020). "COVID-19, societalization, and the future of business in society." Academy of Management Perspectives , 34(4), pp. 493-507. https://doi.org/10.5465/amp.2019.0053
  5. Cheon, S.H., and Lee, Y.I., (2006). "A Study on the Estimation of the Pedestrian Environment at the Access within the Median Bus Station Using Queueing Theory." Journal of the Korean Society of Transportation, 53, pp. 721-729.
  6. Choi, Y.W., and Cho, H.S. (2014). "A Study on the Reduction of Traffic Induced Contributions through installing a Parking Guidance System." Journal of the Korean Society of Civil Engineers, 34(1), 235-241. https://doi.org/10.12652/Ksce.2014.34.1.0235
  7. Dabirian, S., Abbaspour, S., Khanzadi, M., and Ahmadi, M. (2022). "Dynamic modelling of human resource allocation in construction projects." International Journal of Construction Management, 22(2), pp. 182-191. https://doi.org/10.1080/15623599.2019.1616411
  8. Deng, K., Chen, W., Mehta, P.G., and Meyn, S.P. (2008). "Resource pooling for optimal evacuation of a large building." In 2008 47th IEEE Conference on Decision and Control, IEEE, pp. 5565-5570.
  9. Dewandaru, I.B., Aditya, D., Zaman, A.N., and Lestari, F. (2021). Analysis of Waiting Time and Worker Utilization on A Gas Station in Indonesia.
  10. Frederick, H., and Mark, H. (2010). Introduction to Management Science, A Modeling and Case Studies with Spreadsheets.
  11. Gautam, N. (2012). "Analysis of queues." CRC Press, LLC, Boca Raton, Florida, United States, 10, 2222496.
  12. Ham, N.H., Moon, S.K., Kim, J.H., and Kim, J.J. (2020). "Optimal BIM staffing in construction projects using a queueing model." Automation in Construction, 113, 103123.
  13. Ham, N.H., Yuh, O.K., and Ji, K.H. (2018). "Empirical Evaluation of BIM Coordinator Performance using Queuing Model in Construction Phase." Journal of KIBIM, 8(3), PP. 31-42
  14. Han, M.G. (2001). "A Simulation for Optimum Working Process System at Bank Windows," Journal of Korea Spatial Informantion Society, Masters Thesis, Chonanm National University, pp. 1-48.
  15. Hou, J., and Zhao, X. (2020). "Using a priority queuing approach to improve emergency department performance." Journal of Management Analytics, 7(1), pp. 28-43. https://doi.org/10.1080/23270012.2019.1691945
  16. Huh, S.H., Shim, J.H., Ham, N.H., and Kim, J.J., (2021). "BIM-based Design Verification Performance Analysis with Priority Rules Applied." Journal of KIBIM, 11, pp. 1-11.
  17. Hou, J., and Zhao, X. (2020). "Using a priority queuing approach to improve emergency department performance." Journal of Management Analytics, 7(1), pp. 28-43. https://doi.org/10.1080/23270012.2019.1691945
  18. Ibanez, M.R., Clark, J.R., Huckman, R.S., and Staats, B.R. (2018). "Discretionary task ordering: Queue management in radiological services." Management Science, 64(9), pp. 4389-4407. https://doi.org/10.1287/mnsc.2017.2810
  19. Jagannathan, K., Modiano, E., and Zheng, L. (2008). Effective resource allocation in a queue: How much control is necessary?. In 2008 46th Annual Allerton Conference on Communication Control and Computing, IEEE, pp. 508-515.
  20. Jang, M.H., and Cha, H.S., (2005). "A Method of Resource Leveling by Scheduling Resource Delivery and Use." Journal of the Proceedings of the Korean Institute of Building Construction Conference, pp. 83-90.
  21. Jeong, C.U., Moon, Y.J., and Hwang, Y.H. (2021). "Analysis for daily food delivery and consumption trends in the Post-Covid-19 era through big data." Journal of the Korea Society of Computer and Information, 26(1), pp. 231-238.
  22. Kim, H.J., Yoo, M.Y., Kim, J.J., and Choi, C.S. (2017). "Performance Analysis of BIM Labor using Case Analysis." Journal of KIBIM, 7(3), pp. 31-39. https://doi.org/10.13161/KIBIM.2017.031
  23. Kim, J.W., Ham, N.H, and Kim, J.J. (2021). "Quantitative Analysis of Waiting Length and Waiting Time for Frame Construction Work Activities Using a Queue Model; Focusing on Korean Apartment Construction." Sustainability, 13(7), p. 3778.
  24. Kim, W.G., Ham, N.H., and Kim, J.J. (2021). "Enhanced Subcontractors Allocation for Apartment Construction Project Applying Conceptual 4D Digital Twin Framework." Sustainability, 13(21), p. 11784.
  25. Kim, S.T. (2021). "A Study on Optimizing the Space Planning of a Health Examination Center using Resources and Queue Management Simulation Technology." Journal of the Korean Institute of Spatial Design, 16(5), pp. 381-394.
  26. Korea Consumer Agency, (2016). "Drive-Thru Safety Survey" pp. 1-33.
  27. Lee, H.J., Kim, D.W., Cho, H.H., and Kang, K.I. (2008). "Development of the model using queueing theory for lifting planning in tall buildings." Proceedings of KICEM Annual Conference, KICEM, 8, pp. 628-633.
  28. Lim, M.R., and Ryu, G.H. (2022). "Expansion of coffee shop untact service and research on delivery service-Focusing on coffee delivery keywords that utilize big data." The Journal of the Convergence on Culture Technology, 8(3), pp. 183-189.
  29. Nair, R.K., Sinha, R., Crasto, S.G., Kian, K.W., Kee, D.M. H., Abdullah, S.A.B., and Ganatra, V. (2021). "The effect of Starbucks marketing campaigns on consumer buying behaviour." Asia Pacific Journal of Management and Education (APJME), 4(1), pp. 72-81. https://doi.org/10.32535/apjme.v4i1.1052
  30. Nijkamp, P., and Kourtit, K. (2022). "Place-Specific Corona Dashboards for Health Policy: Design and Application of a 'Dutchboard'." Sustainability, 14(2), p. 836.
  31. Oh, C.H., and Kim, D.S. (2020). "A Study on the Consumer Awareness of the Drive-Thru in Coffee Shop." The Journal of the Korea Contents Association, 20(9), pp. 380-388. https://doi.org/10.5392/JKCA.2020.20.09.380
  32. SON, S.H., and KO, D.S. (2022). "Improvement on Policy of Traffic Generation Charge." Korean Society of Transportation, 19(3), pp. 6-11.
  33. Ting, N.R., Sufahani, S.F., and Fahmy-Abdullah, M. (2022). "Enhancing the Queuing Management System in Malaysian Public Hospital." In Proceedings of the Third International Conference on Trends in Computational and Cognitive Engineering, Springer, Singapore, pp. 329-339.
  34. Urban Traffic Improvement Promotion Act (2021). Article 1.
  35. Wee, K.S., Noh, S.H., Ham, N.H., and Kim, J.J. (2021). "A study on the Improvement of the Large-scale Apartment Foundation Concrete Pouring Work in South Korea Resource Management using the Queing Model." Journal of the Architectural Institute of Korea, 37(9), pp. 227-235. https://doi.org/10.5659/JAIK.2021.37.9.227
  36. Weiss, E.N., and Tucker, C. (2018). "Queue management: Elimination, expectation, and enhancement." Business Horizons, 61(5), pp. 671-678. https://doi.org/10.1016/j.bushor.2018.05.002
  37. Whitenack, L., and Mahabir, R. (2022). "A tool for optimizing the efficiency of drive-thru services." In 2022 Systems and Information Engineering Design Symposium (SIEDS), IEEE, pp. 151-156.
  38. Wibowo, D.R., Hergiyan, S., Zaman, A.N., and Lestari, F., (2021). Simulation Analysis of Cashier Service Queue System at a Supermarket.
  39. Zhang, X., and Ahmed, R.R. (2022). "A queuing system for inert construction waste management on a reverse logistics network." Automation in Construction, 137, p. 104221.
  40. Zhong, Y., Chen, Z., Zhou, Z., and Hu, H. (2018). "Uncertainty analysis and resource allocation in construction project management." Engineering Management Journal, 30(4), pp. 293-305.  https://doi.org/10.1080/10429247.2018.1492269