참고문헌
- A. Rabiee, A.H. Kamalinia, K. Haddad, Horizontal steam generator thermal hydraulic simulation in typical steady and transient conditions, Nucl. Eng. Des. 305 (2016), https://doi.org/10.1016/j.nucengdes.2016.06.004.
- A. Rabiee, A.H. Kamalinia, K. Hadad, Two-phase flow field simulation of horizontal steam generators, Nucl. Eng. Technol. 49 (1) (2017), https://doi.org/10.1016/j. net.2016.08.008, 10.1016/J.NUCENGDES.2019.04.018.
- J. Hu, X. Ning, S. Sun, F. Li, J. Ma, W. Zhang, Fluid-structure coupled analysis of flow-induced vibrations in three dimensional elastic hydrofoils, Mar. Struct. 84 (2022), 103220, https://doi.org/10.1016/J.MARSTRUC.2022.103220.
- Z. Quan, K. Zhang, Z. Xiong, H. Zu, H. Gu, Y. Xie, Experimental study on cross flow induced vibration response of four-span straight tube bundle with TSP or AVB supports, Nucl. Eng. Des. 349 (2019) 8-19. https://doi.org/10.1016/j.nucengdes.2019.04.018
- D. Chen, P. Marzocca, Q. Xiao, Z. Zhan, C. Gu, Vortex-induced vibration on a low mass ratio cylinder with a nonlinear dissipative oscillator at moderate Reynolds number, J. Fluid Struct. 99 (2020), 103160, https://doi.org/10.1016/J.JFLUIDSTRUCTS.2020.103160.
- P. Wang, W. Zhao, J. Jiang, X. Wang, S. Li, X. Luo, Experimental and numerical investigations of flow-induced vibration of tube arrays subjected to cross flow, Int. J. Pres. Ves. Pip. 176 (2019), 103956, https://doi.org/10.1016/J.IJPVP.2019.103956.
- T. Nazari, A. Rabiee, H. Kazeminejad, Two-way fluid-structure interaction simulation for steady-state vibration of a slender rod using URANS and LES turbulence models, Nucl. Eng. Technol. 51 (2) (2019) 573-578, https://doi.org/10.1016/J.NET.2018.10.011.
- T. Nazari, A. Rabiee, H. Kazeminejad, Flow-induced vibration analysis of nuclear fuel rods using equivalent fuel element model, Nucl. Eng. Des. 363 (2020), 110639, https://doi.org/10.1016/J.NUCENGDES.2020.110639.
- A. Ramachandra Murthy, S. Vishnuvardhan, K.v. Anjusha, P. Gandhi, P.K. Singh, Prediction of fatigue crack initiation life in SA312 Type 304LN austenitic stainless steel straight pipes with notch, Nucl. Eng. Technol. 54 (5) (2022) 1588-1596, https://doi.org/10.1016/J.NET.2021.11.011.
- A.R. Murthy, P. Gandhi, S. Vishnuvardhan, G. Sudharshan, Crack growth analysis and remaining life prediction of dissimilar metal pipe weld joint with circumferential crack under cyclic loading, Nucl. Eng. Technol. 52 (12) (2020) 2949-2957, https://doi.org/10.1016/J.NET.2020.06.001.
- H. Liang, R. Zhan, D. Wang, C. Deng, B. Guo, X. Xu, Fatigue crack growth under overload/underload in different strength structural steels, J. Constr. Steel Res. 192 (2022), 107213, https://doi.org/10.1016/J.JCSR.2022.107213.
- Q. Niu, S.X. Yang, Study on fatigue degradation behavior of a cracked rotor subjected to lateral vibration, Shock Vib. (2018), https://doi.org/10.1155/2018/3239523, 2018.
- M. Salahi Nezhad, D. Floros, F. Larsson, E. Kabo, A. Ekberg, Numerical predictions of crack growth direction in a railhead under contact, bending and thermal loads, Eng. Fract. Mech. 261 (2022), 108218, https://doi.org/10.1016/J.ENGFRACMECH.2021.108218.
- Z.H. Li, X.Y. Wang, C. Hong, Y.H. Lu, T. Shoji, Fatigue crack initiation and propagation behavior of Inconel Alloy 690TT steam generator tube, Mater. Sci. Eng., A 811 (2021), 141090, https://doi.org/10.1016/J.MSEA.2021.141090.
- J.A. Balbin, V. Chaves, C. Madrigal, A. Navarro, Crack paths for mild steel specimens with circular holes in high cycle fatigue, Procedia Struct. Integr. 39 (2022) 111-119, https://doi.org/10.1016/J.PROSTR.2022.03.079.
- M.A. Farsi, P. Gholami, Fatigue crack growth analysis via Wiener degradation model with random Effects, Amirkabir (J. Sci. Technol. (2020), https://doi.org/10.22060/mej.2020.17437.6596.
- T.K. Lin, M.H. Yu, An experimental study on the crossflow vibration of a flexible cylinder in cylinder arrays, Exp. Therm. Fluid Sci. 29 (4) (2005) 523-536, https://doi.org/10.1016/J.EXPTHERMFLUSCI.2004.06.004.
- A.C.O. Miranda, M.A. Meggiolaro, J.T.P. Castro, L.F. Martha, T.N. Bittencourt, Fatigue life and crack path predictions in generic 2D structural components, Eng. Fract. Mech. 70 (10) (2003) 1259-1279, https://doi.org/10.1016/S0013-7944(02)00099-1.
- J. Lukacs, Fatigue crack growth tests on type 321 austenitic stainless steel in corrosive environment and at elevated temperature, Procedia Eng. 2 (1) (2010) 1201-1210, https://doi.org/10.1016/J.PROENG.2010.03.130.