Geomechanics and Engineering

  • 제32권2호
  • /
  • Pages.209-232
  • /
  • 2023
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation on economical method of foundation construction on soft soils in seismic zones: A case study in southern Iran

  • Javad, Jalili (International Institute of Earthquake Engineering and Seismology) ;
  • Farajdollah, Askari (International Institute of Earthquake Engineering and Seismology) ;
  • Ebrahim, Haghshenas (International Institute of Earthquake Engineering and Seismology) ;
  • Azadeh, Marghaiezadeh (International Institute of Earthquake Engineering and Seismology)
  • 투고 : 2022.08.24
  • 심사 : 2023.01.09
  • 발행 : 2023.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A comprehensive study was conducted to design economical foundations for a number of buildings on soft cohesive soil in the southern coastal regions of Iran. Both static and seismic loads were considered in the design process. Cyclic experiments indicated that the cohesive soil of the area has potential for softening. Consequently, the major challenge in the design stages was relatively high dimensions of settlement, under both static and seismic loadings. Routine soil-improvement methods were too costly for the vast area of the project. After detailed numerical modeling of different scenarios, we concluded that, in following a performance-based design approach and applying a special time schedule of construction, most of the settlement would dissipate during the construction of the buildings. Making the foundation as rigid as possible was another way to prevent any probable differential settlement. Stiff subgrade of stone and lime mortar under the grid foundation and a reinforced concrete slab on the foundation were considered as appropriate to this effect. In favor of an economical design, in case the design earthquake strikes the site, the estimations indicate no collapse of the buildings even if considerable uniform settlements may occur. This is a considerable alternative design to costly soil-improvement methods.

키워드

과제정보

This study was supported partly by the International Institute of Earthquake Engineering and Seismology (IIEES) and partly by the Natural Disasters Research Institute (NDRI). The authors gratefully acknowledge the IIEES and NDRI as well as Mrs. Rakhshande for the valuable data she gathered from the field observations. Dr. M.K. Jafari and Dr. M. Davoudi are highly acknowledged for their valuable help during the research. The authors also thank Mr. M. Asgari, Mr. G. Hadavi and Mr. S. Azadmanesh for their assistance in conducting the tests.

참고문헌

  1. American Society of Civil Engineers, and Structural Engineering Institute, (2016), Minimum Design Loads on Buildings and Other Structures, Standards Committee.
  2. Boulanger, R.W. and Idriss, I.M. (2004), "Evaluating the potential for liquefaction or cyclic failure of silts and clays", (p. 131). Davis, California: Center for Geotechnical Modeling.
  3. Boulanger, R.W. and Idriss, I.M. (2007), "Evaluation of cyclic softening in silts and clays", J. Geotech. Geoenviron. Eng., 133(6), 641-652. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:6(641).
  4. Bowles, J.E. (1996), Foundation Analysis and Design, 5th Ed., McGraw-Hill Companies.
  5. Brinkgreve, R.B.J., Kappert, M.H. and Bonnier, P.G. (2007), "Hysteretic damping in a small-strain stiffness model." Proceedings of the Numerical Modeling in Geomechanics, NUMOG X, Rhodes:737-742.
  6. Brinkgreve, R.B.J., Swolfs, W.M. and Engin, E. (2020), PLAXIS User's Manuals, PLAXIS BV, Delft, The Netherlands.
  7. Building and Housing Research Center. (2014), Iranian Code of Practice for Seismic Resistant Design of Buildings, Standard No. 2800. Fourth Revision, Tehran, Iran.
  8. Coduto, D.P., Kitch, W.A. and Yeung, M.C.R. (2014), Foundation design: principles and practices. USA: Prentice Hall.
  9. Day, R.W. (2010), Foundation engineering handbook: design and construction with the 2009 international building code. McGraw-Hill Education.
  10. Fakher, A. (2011), Advanced Foundation Engineering, 1st edition University of Tehran press (in Persian).
  11. Ghazavi, M. and Hadiani, N. (2005), Bearing capacity of multi-edge shallow foundations. M.Sc. thesis, K. N. T. University of technology, Tehran, Iran (in Persian).
  12. Ghazavi, M. and Mokhtari, S. (2008), "Numerical investigation of load-settlement characteristics of multi-edge shallow foundations", Proceedings of the 12th International Conference of International Association for Computer Methods and Advances in Geomechanics, Goa, India.
  13. Hashash, Y.M.A., Musgrove, M.I., Harmon, J.A., Ilhan, O., Xing, G., Numanoglu, O., Groholski, D.R., Phillips, C.A. and Park, D. (2020), DEEPSOIL 7.0, User Manual. Urbana, IL, Board of Trustees of University of Illinois at Urbana-Champaign.
  14. Hodgkinson, A. (2013), Foundation Design. Elsevier.
  15. Jalili, J., Askari, F., Haghshenas, E., Zaferani, H., Rashidi, A. and Davoudi, M. (2021), Comprehensive geotechnical studies on the site of Sarbandar city in Khuzestan province, to suggest improvement methods with seismic considerations. Research report at International Institute of Earthquake Engineering and Seismology, Iran (in Persian).
  16. Karstunen, M. and Leoni, M. (Eds.) (2008), "Geotechnics of Soft Soils: Focus on Ground Improvement", Proceedings of the 2nd International Workshop held in Glasgow, Scotland, 3-5 September 2008. CRC Press.
  17. Kramer, S.L. (1996), Geotechnical earthquake engineering. Pearson Education India.
  18. Lysmer, J. and Kuhlemeyer, R.L. (1969), "Finite dynamic model for infinite media", J. Eng. Mech. Div., 95(4), 859-878. https://doi.org/10.1061/JMCEA3.0001144.
  19. Makra, A. (2013), Evaluation of the UBC3D-PLM constitutive model for prediction of earthquake induced liquefaction on embankment dams. Master graduation thesis, Delft University of technology.
  20. Moradi, M. and Jalili, J. (2022), "Investigation on the 2D and 3D numerical simulation of centrifuge tests on a soil-nailed wall under seismic loading", Bulletin of Engineering Geology and the Environment, under review.
  21. Petalas, A. and Galavi, V. (2013), PLAXIS liquefaction model ubc3d-plm, PLAXIS Report.
  22. Road, Housing and Urban Development Research Center. (2013), Iranian National Building Code, 7th issue, Foundation Design and Construction, Tehran, Iran.
  23. SakhtAzma geotechnical consulting engineers. (2021), Report of subsurface investigation-Imam Khomeini Port (Sarbandar),Khuzestan, Iran.
  24. Schaefer, V.R., Berg, R.R., Christopher, B.R., DiMaggio, J.A., Filz, G.M., Bruce, D.A., Ayala, D., Collin, J.G. and Berg, R.R. (2016), Geotechnical Engineering Circular No. 13 Ground Modification Methods-Reference Manual, Volume II (No. FHWA-NHI-16-028). National Highway Institute (US).
  25. Seed, R.B., Cetin, K.O., Moss, R.E., Kammerer, A.M., Wu, J., Pestana, J.M., Riemer, M.F., Sancio, R.B., Bray, J.D., Kayen, R.E. and Faris, A. (2003), "Recent advances in soil liquefaction engineering: a unified and consistent framework." In Proceedings of the 26th Annual ASCE Los Angeles Geotechnical Spring Seminar: Long Beach, CA.
  26. Zamiran consulting engineers. (2002), Soils and foundations investigation, proposed PVC complex, for Ghadir petrochemical company, Iran.