Acknowledgement
본 연구는 한국건설기술연구원의 주요사업 '(22주요-대5-중기지원국내-기술사업화) "고속 충격파 반응형 전단농화유체를 이용한 발파전색 기술개발"의 지원으로 수행되었습니다. 또한 현장 실증을 공동으로 수행해 주신 GS건설 관계자 여러분께 진심으로 감사의 말씀을 전합니다.
References
- 고영훈, 곽기석, 서승환, 정영준, 김식, 정문경, 2022, 수치해석 기법을 이용한 발파전색 재료 및 플러그 장치의 폭발압 저항효과에 관한 연구, 화약.발파, 제40권 2호, pp. 1-14. https://doi.org/10.22704/KSEE.2022.40.2.001
- American Society for Testing and Materials, 2018, Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation, ASTM D7128-18, 7-30.
- Brinkmann, J.R, 1990, An experimental study of the effects of shock and gas penetration in blasting. In Proceedings of the 3th International Symposium on Rock Fragmentation by Blasting, Brisbane, Australia, pp. 55-66.
- Cui, Z.D., Yuan, L., Yan, C.L, 2010, Water-silt composite blasting for tunnelling. Int. J. Rock Mech. Min. Sci. 47, pp. 1034-1037. https://doi.org/10.1016/j.ijrmms.2010.06.004
- Cho, SH., Kaneko K., 2004, Influence of the applied pressure waveform on the dynamic fracture processes in rock. Int J Rock Mech Min Sci, 41(5), pp. 771-784. https://doi.org/10.1016/j.ijrmms.2004.02.006
- Crawford, N. C., Popp, L. B, Johns, K. E, Caire, L. M, Peterson, B. N, Liberatore M. W, 2013, Shear thickening of corn starch suspensions: Does concentration matter?, Journal of Colloid and Interface Science, vol. 396, pp. 83-89. https://doi.org/10.1016/j.jcis.2013.01.024
- Dowding, C. H. and Aimone, C. T, 1985, Multiple blast-hole stresses and measured fragmentation, Rock Mech Rock Eng, pp. 17-36.
- Eloranta, J, 1994, Stemming selection for large diameter blast holes. In Proceedings of the 20rd Annual Conference on Explosive and Blasting Techniques, ISEE, pp. 1-11.
- Floyd, J.L, 1999, Explosive energy relief-The key to Control. over break. In Proceedings of the Explosion, pp. 147-153.
- Gurgen, S., Kushan, M.C., 2017, The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics. Mech. Adv. Mater. Struct. 24, pp. 1381-1390. https://doi.org/10.1080/15376494.2016.1231355
- Kopp, J.W, 1987, Stemming Ejection and Burden Movements from Small Borehole Blasts; United States Department of the Interior, Bureau of Mines.
- Ko, Y., Kwak, K., 2022, Blast effects of a shear thickening fluid-based stemming material. Mining 2, pp. 330-349. https://doi.org/10.3390/mining2020018
- Konya, C.J., Konya, A., 2018, Effect of Hole Stemming Practices on Energy Efficiency of Comminution. In Energy Efficiency in the Minerals Industry, pp. 31-53.
- Luo, Y., Wu, S., 2006, Study on length of stemming material and its effect in hole-charged blasting. Mech. Eng. 28, pp. 48-52.
- Lu, J., Yang, P., Yan, M., Chen, and C. Zhou, Y. Lou, and J. Li., 2012, Int. J. Rock Mech. Min. Sci., 53, pp. 129-141. https://doi.org/10.1016/j.ijrmms.2012.05.001
- Lownds, C. M, 2000, Measured shock pressure in the splitting of domension stone, Proceedings of first world conference on exlposives & blasting technique, germany, pp. 241-246.
- Li, Y.L., Shi, X.Z., Liu, B., Zhao, J.P., 2015, Experimental research on reasonable length of water stemming. pp. 11-16.
- Phamotse, K.M., Nhleko, A.S., 2019, Determination of optimal fragmentation curves for a surface diamond mine. J. S. Afr. Inst. Min. Metall. 119, pp. 613-619. https://doi.org/10.17159/2411-9717/494/2019
- Snelling, W.O., Hall, C., 1912, The Effect of Stemming on the Efficiency of Explosives, United States Government Printing Office: Washington, DC, USA.
- Wang, C, 1999, The action of the blasthole plug. J. Univ. Hydr. Electric. Eng. 21, pp. 45-49.
- Zong, Q., 1996, Theoretical discussion of movement rule of stemming in blast holes. vol. 13, pp. 8-11.
- Zhu, Z., Xie, H., Mohanty, B., 2008, Numerical investigation of blasting-induced damage in cylindrical rocks. Int. J. Rock Mech. Min. Sci. 45, pp. 111-121. https://doi.org/10.1016/j.ijrmms.2007.04.012
- Zhang, Z. X, 2016, Stemming and Charge Length, Rock Fracture and Blasting, pp. 271-281.