과제정보
본 연구는 한국연구재단(지역대학우수과학자지원사업)의 지원(No. NRF-2022R1I1A3065299)을 받아 수행된 연구입니다.
참고문헌
- Baek, S.H., Joo, H.W., Kwon, T.H., Han, J.T., Lee, J.H., Yoo, W.K. (2020), "Effect of permeability anisotropy on the effective radius of grout bulb in horizontal permeation grouting - numerical study", Journal of the Korean Geotechnical Society, Vol. 36, No. 11, pp. 149-156. https://doi.org/10.7843/KGS.2020.36.11.149
- Bandis, S.C., Lumsden, A.C., Barton, N.R. (1983), "Fundamentals of rock joint deformation", International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, Vol. 20, No. 6, pp. 249-268.
- Barton, N., Choubey, V. (1977), "The shear strength of rock joints in theory and practice", Rock mechanics, Vol. 10, pp. 1-54. https://doi.org/10.1007/BF01261801
- Barton, N., Lien, R., Lunde, J.J.R.M. (1974), "Engineering classification of rock masses for the design of tunnel support", Rock mechanics, Vol. 6, pp. 189-236. https://doi.org/10.1007/BF01239496
- Choi, S.O., Chung, S.K. (2004), "Stability analysis of jointed rock slopes with the Barton-Bandis constitutive model in UDEC", International Journal of Rock Mechanics and Mining Sciences, Vol. 41, No. 3, pp. 581-586. https://doi.org/10.1016/j.ijrmms.2004.03.103
- Hong, S.Y., Kwon, S.H., Min, K.B., Ji, S.H. (2021), "Effect of excavation and thermal stress on slip zone and aperture change around disposal hole and tunnel in fractured rock", Tunnel and Underground Space, Vol. 31, No. 2, pp. 125-144. https://doi.org/10.7474/TUS.2021.31.2.125
- Jeon, K.H., Ryu, D.W., Kim, H.M., Park, E.S., Song, J.J. (2010), "Numerical analysis of grout flow and injection pressure affected by joint roughness and aperture", Tunnel and Underground Space, Vol. 20, No. 2, pp. 82-91.
- Kim, J.H., Choi, B.I. (2018), "Mechanical and microstructural analysis of cement suspension", Magazine of the Korea Concrete Institute, Vol. 30, No. 3, pp. 33-37.
- Kim, J.M., Lee, E.K. (2022), "A fundamental study on the criteria of basic parameters for planning rock grouting", Journal of the Korean Geotechnical Society, Vol. 38, No. 2, pp. 15-27. https://doi.org/10.7843/kgs.2012.28.2.15
- Kim, S.H., Kim, T.K., Choi, J.I., Yim, K.W. (2010), "A study on the injection efficiency and strength for grouting method", Journal of the Korean Geotechnical Society, Vol. 26, No. 9, pp. 47-58. https://doi.org/10.7843/kgs.2011.27.9.047
- Koh, H.S., Cho, B.J. (2021), "Performance evaluation of injection grouting method for structure foundation ground improvement", Journal of Disaster and Safety, Vol. 3, No. 1, pp. 1-10.
- Lee, J.W., Kim, H.M., Yazdani, M., Park, E.S. (2017), "Influence of design parameters of grout injection in rock mass using numerical analysis", Tunnel and Underground Space, Vol. 27, No. 5, pp. 324-332. https://doi.org/10.7474/TUS.2017.27.5.324
- Lee, J.W., Kim, J.Y., Weon, J.H., Oh, T.M. (2022), "Time-dependent characteristics of viscous fluid for rock grouting", Journal of Korean Tunnelling and Underground Space Association, Vol. 24, No. 6, pp. 465-481. https://doi.org/10.9711/KTAJ.2022.24.6.465
- Lee, W.H., Lim, H.D. (2007), "Analysis of fine particle transfer and shear strength increase using PFC in permeation grouting", Journal of the Korean Geotechnical Society, Vol. 23, No. 11, pp. 49-58. https://doi.org/10.7843/KGS.2007.23.11.49
- Nam, H.Y., Lee, W.J., Lee, C.H., Choo, H.W. (2018), "Estimation of unconfined compressive strength (UCS) of microfine cement grouted sand", Journal of the Korean Geotechnical Society, Vol. 34, No. 7, pp. 5-15. https://doi.org/10.7843/KGS.2018.34.7.5
- Oh, J.Y., Park, H.K., Chang, S.B., Choi, H.S. (2018), "Numerical investigation on the effect of backfill grouting on ground behavior during shield TBM tunneling in sandy ground", Journal of Korean Tunnelling and Underground Space Association, Vol. 20, No. 2, pp. 375-392.
- Park, J.H., Park, Y.W. (2003), "Investigation of the optimum injection pressure in pressure grouting by laboratory model tests", Journal of the Korean Geotechnical Society, Vol. 19, No. 2, pp. 217-225.
- Park, J.W., Park, C.H., Lee, C.S. (2021), "Hydro-mechanical modeling of fracture opening and slip using grain-based distinct element model: DECOVALEX-2023 Task G (Benchmark Simulation)", Tunnel and Underground Space, Vol. 31, No. 4, pp. 270-288.
- Saeidi, O., Ramezanzadeh, A., Sereshki, F., Jalali, M.E. (2013a), "Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: a case study of Bakhtiary Dam of Iran", Journal of Mining and Environment, Vol. 4, No. 1, pp. 15-26.
- Saeidi, O., Stille, H., Torabi, S.R. (2013b), "Numerical and analytical analyses of the effects of different joint and grout properties on the rock mass groutability", Tunnelling and Underground Space Technology, Vol. 38, pp. 11-25. https://doi.org/10.1016/j.tust.2013.05.005
- Yoon, I.K., Moon, J.H., Lee, J.S., Kim, Y.K. (2021), "Characteristics of high-viscosity grouting materials for rock joint reinforcement of deep tunnel", Journal of the Korean Geo-Environmental Society, Vol. 22, No. 12, pp. 59-63. https://doi.org/10.14481/JKGES.2021.22.12.59