과제정보
본 연구는 한국생산기술연구원의 기업수요기반생산기술실용화사업(JA-23-0014)의 지원으로 수행되었습니다.
참고문헌
- A.F. Padilha and P.R. Rios, "Decomposition of austenite in austenitic stainless steels", ISIJ Int. 42 (2002) 325.
- B. Al-Mangour, "Powder metallurgy of stainless steel: state-of-the art, challenges, and development", (Noba Science Publishers, 2015).
- R. Song, J. Xiang and D. Hou, "Characteristics of mechanical properties and microstructure for 316L austenitic stainless steel", J. Iron. Steel Res. Int. 18 (2011) 53.
- L. Hao, S. Dadbakhsh, O. Seaman and M. Felstead, "Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development", J. Mater. Process, Technol. 209 (2011) 5793.
- T. Larimian, M. Kannan, D. Grzesiak, B. Al-Mangour and T. Borkar, "Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting", Mater. Sci. Eng. A 880 (2020) 138455.
- J. Ghorbani, J. Li and A.K. Srivastava, "Application of optimized laser surface re-melting process on selective laser melted 316L stainless steel inclined parts", J. Manuf. Process 56 (2020) 726.
- M.S. Pham, B. Dovgyy and P.A. Hooper, "Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing", Mater. Sci. Eng. A 704 (2017) 102.
- J. Liu, Y. Gao, Y. Fan and W. Zhou, "Fabrication of porous metal by selective laser melting as catalyst support for hydrogen production micaroreactor", Int. J. Hydrog. Energy 45 (2020) 10.
- J.M. Jeon, J.M. Park, J.H. Yu, J.G. Kim, Y. Seong, S.H. Park and H.S. Kim, "Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel", Mater. Sci. Eng. A 763 (2019) 138152.
- Y. Kok, X.P. Tan, P. Wang, M.L.S. Nai, N.H. Loh, E. Liu and S.B. Tor, "Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review", Mater. Des. 139 (2018) 565.
- J.J. Lewandowski and M. Seifei, "Metal additive manufacturing: A review of mechanical properties", Annu. Rev. Mater. Sci. 46 (2016) 151.
- G. Dursun, S. Ibekwe, G. Li, P. Mensah, G. Joshi and D. Jerro, "Influence of laser processing parameters on the surface characteristics of 316L stainless steel manufactured by selective laser melting", Mater. Today: Proc. 26 (2020) 387.
- S.A. Khairallah, A.T. Anderson, A. Rubenchik and W.E. King, "Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones", Acta Mater. 108 (2016) 36.
- A. Sola and A. Nouri, "Microstructural porosity in additive manufacturing: The formation and detection of pores in metal parts fabricated by powder bed fusion", J. Adv. Manuf. Process. 1 (2019) 10021.
- N. Iqbal, E. Jimenez-Melero, U. Ankalkhope and J. Lawrence, "Microstructure and mechanical properties of 316L stainless steel fabricated using selective laser melting", MRS Adv. 4 (2019) 2431.