DOI QR코드

DOI QR Code

Mechanical properties of new stainless steel-aluminum alloy composite joint in tower structures

  • Yingying Zhang (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Qiu Yu (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Wei Song (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Junhao Xu (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Yushuai Zhao (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology) ;
  • Baorui Sun (Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, State Key Laboratory for Geomechanics and Deep Underground Engineering, Jiangsu Collaborative Innovation Center for Building Energy Saving and Construction Technology, China University of Mining and Technology)
  • 투고 : 2021.05.16
  • 심사 : 2023.06.13
  • 발행 : 2023.12.10

초록

Tower structures have been widely used in communication and transmission engineering. The failure of joints is the leading cause of structure failure, which make it play a crucial role in tower structure engineering. In this study, the aluminum alloy three tube tower structure is taken as the prototype, and the middle joint of the tower was selected as the research object. Three different stainless steel-aluminum alloy composite joints (SACJs), denoted by TA, TB and TC, were designed. Finite element (FE) modeling analysis was used to compare and determine the TC joint as the best solution. Detail requirements of fasteners in the TC stainless steel-aluminum alloy composite joint (TC-SACJ) were designed and verified. In order to systematically and comprehensively study the mechanical properties of TC-SACJ under multi-directional loading conditions, the full-scale experiments and FE simulation models were all performed for mechanical response analysis. The failure modes, load-carrying capacities, and axial load versus displacement/stain testing curves of all full-scale specimens under tension/compression loading conditions were obtained. The results show that the maximum vertical displacement of aluminum alloy tube is 26.9mm, and the maximum lateral displacement of TC-SACJs is 1.0 mm. In general, the TC-SACJs are in an elastic state under the design load, which meet the design requirements and has a good safety reserve. This work can provide references for the design and engineering application of aluminum alloy tower structures.

키워드

과제정보

The authors are grateful for the financial support from the National Key Research and Development Project of China (No. 2017YFC1500702), the National Natural Science Foundation of China (No. 52278229), Jiangsu Collaborative Innovation Center of building energy-saving and construction technology (No. SJXTBS2122), and the Postgraduate Research & Practice Innovation Program of Jiangsu Province (No. KYCX21_2275).

참고문헌

  1. ABAQUS 6.14 (2014), Dassault Systemes Simulia Corp, Online Documentation, U.S.A.
  2. Cao, G. (2016), Software Design for Status Monitoring System of Communication Tower, Zhejiang University, China.
  3. Dong, Z. (2012), "Introduction to design and pilot project of aluminum alloy communication tower", Spec. Struct., 29(4), 81-86.
  4. Feng, R., Wang, X., Zhu, J. and Hua, D. (2018), "Research on the overall stability of the assembled single-layer aluminum alloy reticulated shell structure of Beijing New Airport", J. Build. Struct., 41(4), 11-18. https://doi.org/10.14006/j.jzjgxb.2018.0449.
  5. Gayathri, B. (2018), "Joint stress based deflection limits for transmission line towers", Steel Compos. Struct., 26(1), 45-53. https://doi.org/10.12989/scs.2018.26.1.045.
  6. GB 50017-2017 (2017), Standard for Design of Steel Structures. Beijing: China Construction Industry Press, China.
  7. GB 50429-2007 (2007), Code for Design of Aluminium Structures (2007), Beijing: China Construction Industry Press, China.
  8. Han, Y., Xia, Y., Chen, X., Sun, L., Liu, D. and Ge, X. (2018), "Effect of rare earth lanthanum-cerium doping on corrosion behavior of zinc-aluminum-magnesium hot-dip galvanizing coatings used for transmission towers", Anti-Corrosion Meth. Mater., 65(2), 131-137. https://doi.org/10.1108/ACMM-01-2017-1750.
  9. Hu, X., Wang, Z., Wang, Y. and Xing, H. (2015), "Application and research progress of aluminum alloy in transmission tower and emergency repair tower", National Symposium on Modern Structural Engineering.
  10. Li, F., Deng, H.Z. and Hu, X.Y. (2019), "Experimental and numerical investigation into ultimate capacity of longitudinal plate-to-circular hollow section K-and DK-joints in transmission towers", Thin-Wall. Struct., 143, 106240. https://doi.org/10.1016/j.tws.2019.106240.
  11. Liu, H., Gu, A. and Chen, Z. (2020), "Tensile Properties of aluminum alloy bolt-sphere joints under elevated temperatures", KSCE J. Civil Eng., 24(2), 525-536. https://doi.org/10.1007/s12205-020-0312-y.
  12. Liu, J., Pan, W., Li, W. and Feng, Y. (2014), "Development and application of aluminum alloy structural profiles for green buildings", Resource Regeneration, 41(11), 59-63.
  13. Liu, Z. and Wang, L. (2007), "Generation and control of welding deformation of aluminum alloy parts", Welding Technol., 5, 52-53. http://dx.doi.org/10.3969/j.issn.1002-025X.2007.05.018.
  14. Ma, R.J., Yu, L., Zhang, H.Z., Tan, L., Ahmad, B.H.K., Feng, J. and Cai, J.G. (2021), "Experimental and numerical appraisal of steel joints integrated with single- and double-angles for transmission line towers", Thin-Wall. Struct., 164, 107833. https://doi.org/10.1016/j.tws.2021.107833.
  15. Meng, F. and Liu, H. (2021), "Application of 5G wireless communication base station sharing power line tower", J. Shanghai Univ. Electric Power, 37(3), 263-265. http://dx.doi.org/10.3969/j.issn.2096-8299.2021.03.011.
  16. Nezamolmolki, D. and Shooshtari, A. (2021), "The effect of nonlinear behavior of bolted connections on dynamic analysis of steel transmission towers", https://doi.org/10.1007/s13296-021-00462-5.
  17. Pan, D. (2014), "Research on welding deformation and welding process optimization of aluminum alloy components", Jilin University, China.
  18. Pan, H., Li, C. and Tian, L. (2020), "Seismic response and failure analyses of pile-supported transmission towers on layered ground", Struct. Eng. Mech., 76(2), 221-235. https://doi.org/10.12989/sem.2020.76.2.221.
  19. Prasad Rao, N., Samuel Knight, G.M., Lakshmanan, N. and Iyer, N.R. (2012), "Effect of bolt slip on tower deformation", Practice Periodic. Struct. Des. Construct., 17(2), 65-73. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000108.
  20. Roy, S. and Kundu, C.K. (2021), "State of the art review of wind induced vibration and its control on transmission towers", Structures, 29, 254-264. https://doi.org/10.1016/j.istruc.2020.11.015.
  21. Shen, X.H., Zhang, Q., Lee, D.S.H., Cai, J.G. and Feng, J. (2021), "Static behavior of a retractable suspen-dome structure", Symmetry, 13(7), 1105. https://doi.org/10.3390/sym13071105.
  22. Taheri, F., Ghasemi, M.R. and Dizangian, B. (2020), "Practical optimization of power transmission towers using the RBF-based ABC algorithm", Struct. Eng. Mech., 73(4), 463-479. https://doi.org/10.12989/sem.2020.73.4.463.
  23. Tapia-Hernandez, E. and De-Leon-Escobedo, D. (2021), "Vulnerability of transmission towers under intense wind loads", Structure Infrastruct. Eng., https://doi.org/10.1080/15732479.2021.1894183.
  24. Transmission tower. 2018. https://baike.so.com/doc/25708203-26795973.html.
  25. Zhang, X., Cui, J. and Yin, J. (2018), "Structural design of large-span free-form surface aluminum alloy latticed shell of foding palace in NIUSHOUSHAN cultural tourism area, Nanjing", Architect. Struct., 48(14), 8-13. https://doi.org/CNKI:SUN:JCJG.0.2018-14-002.
  26. Zhou, Q., Zhao, L. and Chen, Z. (2021), "Investigation on combined wind load factors of lattice transmission tower body under the action of skewed wind". KSCE Journal of Civil Engineering, https://doi.org/10.1007/s12205-021-1122-6.
  27. Zhou, Y., Zhang, Q., Cai J.G., Zhang Y.T., Yang R.G. and Feng, J. (2021), "Experimental study of the hysteretic behavior of energy dissipation braces based on Miura origami", Thin-Wall. Struct., 167, 108196. https://doi.org/10.1016/j.tws.2021.108196.