과제정보
This paper was studied by the scholarship fund of Seoil University in 2023.
참고문헌
- Yang Seung Bok, "Dynamometer Test for the CVT System using Spring," International Journal of Advanced Smart Convergence Vol.11 No.3 222-228, DOI: http://doi.org/10.7236/IJASC.2022.11.3.222, 2022
- G. S. Kim, "Verification of Stress Analysis on the Bracket of Bus Bear Chassis," International Journal of Advanced Smart Convergence Vol.11 No.4, 266-272, DOI: http://doi.org/10.7236/IJASC.2022.11.4.266, 2022
- W. M. Choi, "Safety Evaluate of Brackets for Bare Chassis of a 30-seated Bus," International Journal of Advanced Smart Convergence Vol.11 No.3, 215-221 DOI: http://doi.org/ 10.7236/IJASC.2022.11.3.215, 2022
- S. B. Yang, "Boundary Condition for Bare Chassis Brackets of the Commercial Vehicle," International Journal of Advanced Smart Convergence Vol.11 No.1, 94-100, DOI: http://doi.org/10.7236/IJASC.2022.11.1.94, 2022
- D. H. Lee & J. U. Cho, "Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP," Journal of the Korea Convergence Society, 9(12), 175-180, DOI: http://doi.org/10.15207/JKCS.2018.9.12.175, 2018
- Y. K. Park & B. G. Lee, "A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining," Journal of the Korea Convergence Society, 9(5), DOI: 12018)0.15207/JKCS.2018.9.5.145, 2018 12018
- J. S. Park & H. J. Park & B. K. Oh, "Optimization of Bearing Bracket for Automotive Drive Shaft," Fall Conference Proceedings of the Korean Society of Automotive Engineers, pp. 408-409, 2018
- J. C. Kim, "Bracket Topology Optimization for Robust Design in Concept Design," Fall Conference Proceedings of the Korean Society of Automotive Engineers, pp. 810-810, 2018
- Y. T. Oh, "Study on the Structural Analysis of SCARA Industrial Robot," Journal of the Korean Society of Mechanical Technology, 19(6), 866-871, DOI: http://doi.org/10.17958/ksmt.19.6.201712.866, 2017
- J. H. Lee & J. U. Cho, "A Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis," Journal of the Korea Convergence Society, 6(4), 99-105, DOI: http://doi.org/10.15207/jkcs.2015.6.4.099, 2015
- H. S. Chang & J. S. Lee, "Design of chassis mounting brackets using optimization method," Spring conferences Proceedings of the Korean Society of Automotive Engineers, pp. 1185-1190, 2012