한국의류학회지 (Journal of the Korean Society of Clothing and Textiles)

  • 제46권4호
  • /
  • Pages.613-623
  • /
  • 2022
  • /
  • 1225-1151(pISSN)
  • /
  • 2234-0793(eISSN)
한국의류학회 (The Korean Society of Clothing and Textiles)
권호 표지
DOI QR코드

DOI QR Code

상지 부하 감소를 위한 기능성 상의 프로토타입 디자인

Design of a Prototype Jacket for Upper Extremity Load Reduction

  • Park, Sunhee (Research Institute of Human Ecology, Chungnam National University) ;
  • Lee, Yejin (Dept. of Clothing and Textiles, Chungnam National University)
  • 투고 : 2022.02.28
  • 심사 : 2022.07.21
  • 발행 : 2022.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study developed a functional prototype jacket designed to reduce loads on the upper extremities of workers performing repetitive motions in the same posture for extended periods of time. Dynamic taping lines were applied to the upper extremities, and three dimensional (3D) supporters were inserted in the abdomen and back waist areas corresponding to the core muscles. Clothing pressure on the upper-extremity dynamic taping lines was set to two levels (proto P1 and proto P2), and the 3D supporters were designed in three types (proto FW, proto FW/BW, proto FW/BW/BBX). According to the subjective pressure perceived on each part of the upper extremities, the level proto P1 pressure was preferred. The proto FW/BW/BBX 3D supporter was rated as excellent, and the perceived pressure was ranked as satisfactory. The prototype jacket performed upper-extremity load reduction when the upper-extremity clothing-pressure level was set to 1.8 kPa, 2.1 kPa, and 2.4 kPa on the upper arm, forearm, and wrist regions, respectively, and when 3D supporters were installed in the abdomen and back of the waist with the addition of a back band.

키워드

과제정보

본 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. NRF-2019R1A2C1005598).

참고문헌

  1. Bae, H. S. (2013). The mechanical properties of working clothes materials considering industrial settings. Textile Coloration and Finishing, 25(2), 140-151.doi:10.5764/TCF.2013.25.2.140
  2. Born, D.-P., Holmberg, H.-C., Goernert, F., & Sperlich, B. (2014). A novel compression garment with adhesive silicone stripes improves repeated sprint performance - a multi-experimental approach on the underlying mechanisms. BMC Sports Science, Medicine and Rehabilitation, 6:21. doi:10.1186/2052-1847-6-21
  3. Braganca, S., Carvalho, M., Arezes, P., & Ashdown, S. P. (2017). Work-wear pattern design to accommodate different working postures. International Journal of Clothing Science and Technology, 29(3), 294-313. doi:10.1108/IJCST-05-2016-0063
  4. Chae, W-S., & Kang, N.-J. (2011). The effect of wearing spandex wear with compression band on biomechanical parameters during a golf drive swing. Korean Journal of Sport Biomechanics, 21(3), 345-352. doi:10.5103/KJSB.2011.21.3.345
  5. Chun, J. (2017). Development of wearable fashion prototypes using entry-level 3D printers. Journal of the Korean Society of Clothing and Textiles, 41(3), 468-486. doi:10.5850/JKSCT.2017.41.3.468
  6. Donnanno, A. (2016). Fashion patternmaking techniques [Vol. 2]: How to make shirts, undergarments, dresses and suits, waistcoats and jackets for women and men. Barcelona: Promopress.
  7. Hong, K., Park, H., & Kim, S. (2008). 기능성 어패럴과 3D Technology의 접목 [Functional apparel and 3D convergence of technology]. Fiber Technology and Industry, 12(4), 259-267.
  8. Hong, Y., Park, J., Nam, Y. J., Park, D., Cho, K.-J., & Kim, Y. J. (2021). Design development process for clothing of upper limb assistive wearable soft robot. Fashion & Textile Research Journal, 23(1), 106-117. doi:10.5805/SFTI.2021.23.1.106
  9. Huang, T.-z., & Kim, S.-y. (2020). The effectiveness of upper limb offload dynamic taping technique on scapular muscles activation during elevation in healthy subjects. Physical Therapy Korea, 27(2), 93-101. doi:10.12674/ptk.2020.27.2.93
  10. Jeong, Y. (2013). 3D virtual clothing menswear pattern design. Seoul: Ybook.
  11. Kim, H., & Park, C. (2011). Domestic design patent analysis of functional clothing. Journal of the Korean Society for Clothing Industry, 13(1), 1-6. doi:10.5805/KSCI.2011.13.1.001
  12. Kim, M. (2016). Development of a functional compression wear with sports taping application for core muscle compression -Focused on weight training- (Unpublished master's thesis). Ewha Womans University, Seoul.
  13. Kim, N. Y., & Hong, K. (2019). Effects of pressurization on finger's blood velocity of tendon and muscle areas in forearm of 20's male. Fashion & Textile Research Journal, 21(4), 488-496. doi:10.5805/SFTI.2019.21.4.488
  14. Kim, S., & Hong, K. (2014). Development of compression garment of soft type for orthotherapy on low back pain and the improvement of asymmetric EMG. Korean Journal of Human Ecology, 23(4), 665-680. doi:10.5934/kjhe.2014.23.4.665
  15. Kim, Y.-J., Jang, J.-H., Cho, Y.-h., Jeong, J.-H., Cheong, H.-Y., & Lee, S.-S. (2020). An experimental study on the effect of supporting vest for musculoskeletal disorders in low back. The Journal of Korea Institute of Information, Electronics, and Communication Technology, 13(3), 219-225. doi:10.17661/jkiiect.2020.13.3.219
  16. Korean Agency for Technology and Standards. (2010). 6차 인체치수조사 (2010~14) [The 6th national anthropometric survey report (2010-14)]. Size Korea. Retrieved from https://sizekorea.kr/human-info/meas-report?measDegree=6
  17. Korean Agency for Technology and Standards. (2015). 7차 인체치수조사 (2015) [The 7th national anthropometric survey report (2015)]. Size Korea. Retrieved from https://sizekorea.kr/human-info/meas-report?measDegree=7
  18. Korean Agency for Technology and Standards. (2017a, March 30). KS K 0521:2017 Textiles - Tensile properties of fabrics - Determination of maximum force and elongation at maximum force using the strip method. Korean Standards & Certifications. Retrieved from https://e-ks.kr/streamdocs/view/sd;streamdocsId=72059198946228059
  19. Korean Agency for Technology and Standards. (2017b, December 13). KS K ISO 5084:1996 Textiles - Determination of thickness of textile and textile products. Korean Standards & Certifications. Retrieved from https://e-ks.kr/streamdocs/view/sd;streamdocsId=72059208276387304
  20. Lee, J., Jun, J., & Choi, K. (2015). Development of compression wear tops for men in their forties based on muscle locations. Journal of the Korean Society of Clothing and Textiles, 39(2), 271-286. doi:10.5850/JKSCT.2015.39.2.271
  21. Lee, S., & Kim, Y. (2020). A study on the effectiveness of reporting system about risk factors analysis for preventing the musculoskeletal disorders. Journal of the Ergonomics Society of Korea, 39(4), 365-371. doi:10.5143/JESK.2020.39.4.365
  22. Park, S. (2018). The study of prototype pattern design and manufacture status for para ice hockey players' functional inner-wear. Journal of the Korean Society of Costume, 68(3), 140-151. doi:10.7233/jksc.2018.68.3.140
  23. Park, S., & Lee, Y. (2022). Electroencephalography relative alpha spectrum and subjective preference based on compression level of arm according to region. Journal of the Korean Society of Clothing and Textiles, 46(2), 310-320. doi:10.5850/JKSCT.2022.46.2.310
  24. Park, S.-y., Kim, S., & Kendrick, R. (2020). 기능 회복과 향상을 위한 인체역학적 Dynamic taping [Ergonomics for function recovery and improvement dynamic taping]. Seoul: PanMun Education.
  25. Shin, Y.-J., Joo, H.-Y., & Yang, J.-H. (2020). A study on the monitoring technique for musculoskeletal safety management and implementation of the system. The Journal of Korea Institute of Information, Electronics, and Communication Technology, 13(3), 267-276. doi:10.17661/jkiiect.2020.13.3.267