DOI QR코드

DOI QR Code

Three-dimensional analysis of flexible pavement in Nepal under moving vehicular load

  • Ban, Bijay (Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University) ;
  • Shrestha, Jagat K. (Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University) ;
  • Pradhananga, Rojee (Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University) ;
  • Shrestha, Kshitij C. (Department of Civil Engineering, Pulchowk Campus, Institute of Engineering, Tribhuvan University)
  • 투고 : 2021.11.15
  • 심사 : 2022.08.18
  • 발행 : 2022.10.25

초록

This paper presents a three-dimensional flexible pavement simulated in ANSYS subjected to moving vehicular load on the surface of the pavement typical for the road section in Nepal. The adopted finite element (FE) model of pavement is validated with the classical theoretical formulations for half-space pavement. The validated model is further utilized to understand the damping and dynamic response of the pavement. Transient analysis of the developed FE model is done to understand the time varying response of the pavement under a moving vehicle. The material properties of pavement considered in the analysis is taken from typical road section used in Nepal. The response quantities of pavement with nonlinear viscoelastic asphalt layer are found significantly higher compared to the elastic pavement counterpart. The structural responses of the pavement decrease with increase in the vehicle speed due to less contact time between the tires of the vehicle and the road pavement.

키워드

과제정보

This research is funded by Roads Board Nepal (RBN) under Nepal Government. The authors acknowledge the support provided by Center for Infrastructure Development Studies (CIDS), Institute of Engineering, Tribhuvan University. The authors would also like to thank Er. Pramod Tiwari, Er. Sangita Acharya and Er. Prabin Wagle for providing invaluable support during this study.

참고문헌

  1. AASHTO (1993), "AASHTO Guide for Design of pavement structures", International Conference on Sustainable Waste Management and Recycling: Construction Demolition Waste.
  2. Al-Qadi, I.L., Wang, H., Yoo, P.J. and Dessouky, S.H. (2008), "Dynamic analysis and in situ validation of perpetual pavement response to vehicular loading", Transp. Res. Record, 2087, 29-39. https://doi.org/10.3141/2087-04.
  3. Ali, B., Sadek, M. and Shahrour, I. (2009), "Finite-Element model for urban pavement rutting: Analysis of pavement rehabilitation methods", J. Transp. Eng., 135(4), 235-239. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:4(235).
  4. ANSYS (2013), ANSYS Mechanical APDL Verification Manual, ANSYS Inc. Southpointe, Canonsburg, PA.
  5. Assogba, O.C., Tan, Y., Zhou, X., Zhang, C. and Anato, J.N. (2020), "Numerical investigation of the mechanical response of semi-rigid base asphalt pavement under traffic load and nonlinear temperature gradient effect", Constr. Build. Mater., 235, 117406. https://doi.org/10.1016/j.conbuildmat.2019.117406.
  6. Bathe K.J. (2005), Finite Element Procedures [M], in Englewood Cliffs New Jersey.
  7. Berthelot, C.F., Allen, D.H. and Searcy, C.R. (2003), "Method for performing accelerated characterization of viscoelastic constitutive behavior of asphaltic concrete", J. Mater. Civil Eng., 15(5), 496-505. https://doi.org/10.1061/(asce)0899-1561(2003)15:5(496).
  8. Beskou, N.D., Tsinopoulos, S.V. and Hatzigeorgiou, G.D. (2016), "Fatigue cracking failure criterion for flexible pavements under moving vehicles", Soil Dyn. Earthq. Eng., 90, 476-479. https://doi.org/10.1016/j.soildyn.2016.09.019.
  9. Beskou, N.D., Tsinopoulos, S.V. and Theodorakopoulos, D.D. (2016), "Dynamic elastic analysis of 3-D flexible pavements under moving vehicles: A unified FEM treatment", Soil Dyn. Earthq. Eng., 82, 63-72. https://doi.org/10.1016/j.soildyn.2015.11.013.
  10. Boussinesq, J. (1885), Application Des Potentiels, Gauthier-Villars Publications, Paris, France.
  11. Byzyka, J., Rahman, M., Chamberlain, D.A. (2020), "Thermal analysis of hot mix asphalt pothole repair by finite-element method", J. Transp. Eng. B Pavements, 146(3), 04020029. https://doi.org/10.1061/jpeodx.0000156.
  12. Cebon, D. (1999), Handbook of Vehicle-Road Interaction, Taylor & Francis, London, U.K.
  13. Cho, Y.H., McCullough, B.F. and Weissmann, J. (1996), "Considerations on finite-element method application in pavement structural analysis", Transp. Res. Record, 1539(1), 96-101. https://doi.org/10.1177/0361198196153900113.
  14. De Beer, M. (1996), "Measurement of tyre pavement interface stresses under moving wheel loads", Heavy Vehicle Syst., 3(1-2), 97-115. https://doi.org/10.1504/IJHVS.1996.054553
  15. DeSalva, Gabriel J., Swanson, J.A. (1985a), ANSYS Engineering Analysis System User'S Manual, Pa. :Swanson Analysis Systems, Houston, U.S.A.
  16. DeSalva, Gabriel J., Swanson, J.A. (1985b), "ANSYS Mechanical APDL Basic Design Guide, Pa. :Swanson Analysis Systems, Houston, U.S.A.
  17. DOR (2021), Guidelines for the Design of Flexible Pavements 2014 (Second Edition), Department of Roads; Lalitpur, Nepal.
  18. Gonzalez, J.M., Miquel Canet, J., Oller, S. and Miro, R. (2007), "A viscoplastic constitutive model with strain rate variables for asphalt mixtures-numerical simulation", Comput. Mater. Sci., 38(4), 543-560. https://doi.org/10.1016/j.commatsci.2006.03.013.
  19. Gungor, O.E., Al-Qadi, I.L., Gamez, A. and Hernandez, J.A. (2016), In-situ validation of three-dimensional pavement finite element models, in The Roles of Accelerated Pavement Testing in Pavement Sustainability: Engineering, Environment, and Economics, Springer International Publishing. https://doi.org/10.1007/978-3-319-42797-3_10.
  20. Hatzigeorgiou George D., G.D. and Beskos, D.E. (2010), "Soil-structure interaction effects on seismic inelastic analysis of 3-D tunnels", Soil Dyn. Earthq. Eng., 30(9), 851-861. https://doi.org/10.1016/j.soildyn.2010.03.010.
  21. Howard, I.L. and Warren, K.A. (2009), "Finite-element modeling of instrumented flexible pavements under stationary transient loading", J. Transp. Eng., 135(2), 53-61. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:2(53).
  22. Huang, B., Mohammad, L.N. and Rasoulian, M. (2001), "Three-dimensional numerical simulation of asphalt pavement at Louisiana accelerated loading facility", Transp. Res. Record, 1764(1764), 44-58. https://doi.org/10.3141/1764-06.
  23. Huang, C.W., Abu Al-Rub, R.K., Masad, E.A. and Little, D.N. (2011), "Three-dimensional simulations of asphalt pavement permanent deformation using a nonlinear viscoelastic and viscoplastic model", J. Mater. Civil Eng., 23(1), 56-68. https://doi.org/10.1061/(asce)mt.1943-5533.0000022.
  24. Huang, Y.H. (2004), Pavement Analysis and Design, Prentic-Hall In Inc., New Jersey, USA.
  25. IRC (2018), Guidelines for the Design of Flexible Pavements, Indian Roads Congress Fourth (Revision), New Delhi, India.
  26. Khan, S., Nagabhushana, M.N., Tiwari, D. and Jain, P.K. (2013), "Rutting in flexible pavement: An approach of evaluation with accelerated pavement testing facility", Procedia - Social and Behavioral Sciences, 104, 149-157. https://doi.org/10.1016/j.sbspro.2013.11.107.
  27. Li, S., Guo, Z. and Yang, Y. (2015), "Dynamic viscoelastic response of an instrumented asphalt pavement under various axles with non-uniform stress distribution", Road Mater. Pavement Des., 17(2), 446-465. https://doi.org/10.1080/14680629.2015.1080178.
  28. Li, M., Wang, H., Xu, G. and Xie, P. (2017), "Finite element modeling and parametric analysis of viscoelastic and nonlinear pavement responses under dynamic FWD loading", Constr. Build. Mater., 141, 23-35. https://doi.org/10.1016/j.conbuildmat.2017.02.096.
  29. Lu, Y. and Wright, P.J. (1998), "Numerical approach of visco-elastoplastic analysis for asphalt mixtures", Comput. Struct., 69(2), 139-147. https://doi.org/10.1016/S0045-7949(98)00139-4.
  30. Melaku, S., Qiu H. (2015), "Finite element analysis of pavement design using ANSYS finite element code", Proceeding of the 2nd Int. Conf. on Civil Engineering, Energy and Environment, 64-69, Hubei, China.
  31. Road Note 31 (1984), Road note 31: A guide to the structural design of bitumen surfaced roads in tropical and subtropical countries, Transport and Road Research Laboratory (TRRL); Berkshire, U.K.
  32. Saleeb, A., Liang, R.Y., Qablan, H.A.L. and Powers, D. (2005), "Numerical simulation techniques for HMA rutting under loaded wheel tester", Int. J. Pavement Eng., 6(1), 57-66. https://doi.org/10.1080/10298430500068704.
  33. Saint-Venant, B.D. (1855), "Memoire sur la torsion des prismes. Memoires des Savants etrangers", Acad. Sci., Paris, 14, 223-560.
  34. Sebaaly, P.E. and Mamlouk, M.S. (1988), "Development of dynamic fatigue failure criterion", J. Transp. Eng., 114(4), 450-464. https://doi.org/10.1061/(ASCE)0733-947X(1988)114:4(450).
  35. Tata-Motor (2020), Vehicle type Truck LPK 2518 6S 20 cum, TATA Motors Limited, Mumbai, India. https://tatatrucks.tatamotors.com/tata-trucks/tippers/tata-lpk-2518/tata-lpk-2518-6s-20cum-specifications.aspx#specifications
  36. Yoo, P.J. and Al-Qadi, I.L. (2007), "Effect of transient dynamic loading on flexible pavements", Transp. Res. Record, 1990(1990), 129-140. https://doi.org/10.3141/1990-15
  37. Zaghloul, S., White, T., Drnevich, V. and Coree, B. (1994), "Dynamic analysis of FWD loading and pavement response using a three-dimensional dynamic finite-element program", ASTM Special Tech. Publication, 1198, 125-125.
  38. Zhong, X.G., Zeng, X. and Rose, J.G. (2002), "Shear modulus and damping ratio of rubber-modified asphalt mixes and unsaturated subgrade soils", J. Mater. Civil Eng., 14(6), 496-502. https://doi.org/10.1061/(asce)0899-1561(2002)14:6(496).