DOI QR코드

DOI QR Code

Influence of oil pipe corrosion defects on the sealing performance of annular BOP

  • Dong, Liangliang (School of Mechatronic Engineering, Southwest Petroleum University) ;
  • Tang, Yuan (Well Control Emergency Rescue Response Center, CNPC Chuanqing Drilling Engineering Co. Ltd.) ;
  • Wang, Liuyang (Well Control Emergency Rescue Response Center, CNPC Chuanqing Drilling Engineering Co. Ltd.)
  • Received : 2022.01.10
  • Accepted : 2022.09.20
  • Published : 2022.11.10

Abstract

Due to corrosion defects on the surface of the oil pipe, the sealing performance of the annular blowout preventer (BOP) decreases, and the leakage of toxic and harmful gases such as H2S and SO2 will threaten the safety of operators on the well. Therefore, this paper establishes the FE model for evaluating the sealing performance of BOP-oil pipe corrosion defects, which is based on the rubber large deformation theory and rubber core sealing mechanism, and designs the experiment of BOP sealing performance to verify the accuracy of the FE model. The sealing performance of BOP sealing oil pipe with corrosion defects is studied. The research results show that the sealing performance of BOP is more sensitive to the axial size of corrosion defects. With the increase of oil pipe outer diameter, the critical size of defects increases continuously. The sensitivity of radial and depth dimensions is low, When for 88.9 mm outer diameter oil pipe, the axial critical size of corrosion defect is 20 mm, the radial critical size is 16 mm and the critical depth is 2 mm. Fit the formula between the outer diameter of oil pipe and the piston increment. According to the formula, the operator can calculate the piston stroke increment required by the BOP to complete the sealing when the oil pipe is corroded.

Keywords

Acknowledgement

This research was supported by National Natural Science Foundation (52204050), Sichuan science and technology program (2021ZHCG0013, 22ZDYF3009).

References

  1. Adegboye, M.A., Karnik, A. and Fung, W.K. (2021), "Numerical study of pipeline leak detection for gas-liquid stratified flow", J. Nat. Gas Sci. Eng., 94, 104054. https://doi.org/10.1016/j.jngse.2021.104054.
  2. Cai, B., Liu, Y., Liu, Z., Tian, X., Zhang, Y. and Liu, J. (2012), "Performance evaluation of subsea blowout preventer systems with common-cause failures", J. Petrol. Sci. Eng., 90-91, 18-25. https://doi.org/10.1016/j.petrol.2012.04.007.
  3. Charlton, D.J., Yang, J. and Teh, K.K. (1994), "A review of methods to characterize rubber elastic behavior for use in finite element analysis", Rub. Chem. Technol., 67(3), 481-503. https://doi.org/10.5254/1.3538686.
  4. Dong, L., Li, K., Li, B., Zhu, X., Xie, M., Zhang, Y. and Wang, J. (2020), "Study in deep shale gas well to prevent shoulder protruding packer with high pressure sealing", Eng. Fail. Anal., 118, 104871. https://doi.org/10.1016/j.engfailanal.2020.104871.
  5. Dong, L., Li, K., Zhu, X., Li, Z., Zhang, D., Pan, Y. and Chen, X. (2020), "Study on high temperature sealing behavior of packer rubber tube based on thermal aging experiments", Eng. Fail. Anal., 108, 104321. https://doi.org/10.1016/j.engfailanal.2019.104321.
  6. Gajewski, M., Szczerba, R. and Jemiolo, S. (2015), "Modelling of elastomeric bearings with application of yeoh hyperelastic material model", Procedia Eng., 111, 220-227. https://doi.org/10.1016/j.proeng.2015.07.080.
  7. Haruyama, S., Nurhadiyanto, D., Choiron, M.A. and Kaminishi, K. (2013), "Influence of surface roughness on leakage of new metal gasket", Int. J. Press. Ves. Pip., 111-112, 146-154. https://doi.org/10.1016/j.ijpvp.2013.06.004.
  8. Hu, G., Wang, G., Li, M., He, X. and Wu, W. (2018), "Study on sealing capacity of packing element in compression packer", J. Brazil. Soc. Mech. Sci. Eng., 40(9), 438. https://doi.org/10.1007/s40430-018-1364-5.
  9. Hu, G., Wang, M., Wang, G., Zhu, T. and Wei, L. (2021), "Sealing performance and failure mechanism analysis of packing unit used in rotary blowout preventer for under-balanced drilling", Eng. Fail. Anal., 129, 105654. https://doi.org/10.1016/j.engfailanal.2021.105654.
  10. Hu, Y., Zhang, J. and Chen, L. (2020), "Design and seal performance analysis of bionic sealing ring for dynamic seal", Mechanika, 26(4), 338-345. https://doi.org/10.5755/j01.mech.26.4.23264.
  11. Liao, B., Sun, B., Li, Y., Yan, M., Ren, Y., Feng, Q., Yang, D. and Zhou, K. (2019), "Sealing reliability modeling of aviation seal based on interval uncertainty method and multidimensional response surface", Chin. J. Aeronaut., 32(9), 2188-2198. https://doi.org/10.1016/j.cja.2019.01.019.
  12. Meck, K.D. and Zhu, G. (2008), "Improving mechanical seal reliability with advanced computational engineering tools, part 1: FEA", Seal. Technol., 2008(1), 8-11. https://doi.org/10.1016/S1350-4789(08)70023-0.
  13. Meck, K.D. and Zhu, G. (2008), "Improving mechanical seal reliability with advanced computational engineering tools, part 2: CFD and application examples", Seal. Technol., 2008(2), 7-10. https://doi.org/10.1016/S1350-4789(08)70120-X.
  14. Patir, N. (1978), "A numerical procedure for random generation of rough surfaces", Wear, 47(2), 263-277. https://doi.org/10.1016/0043-1648(78)90157-6.
  15. Renaud, C., Cros, J.M., Feng, Z.Q. and Yang, B. (2009), "The Yeoh model applied to the modeling of large deformation contact/impact problems", Int. J. Impact Eng., 36(5), 659-666. https://doi.org/10.1016/j.ijimpeng.2008.09.008.
  16. Shuai, Y., Wang, X.H. and Cheng, Y.F. (2021), "Buckling resistance of an X80 steel pipeline at corrosion defect under bending moment", J. Nat. Gas Sci. Eng., 93, 104016. https://doi.org/10.1016/j.jngse.2021.104016.
  17. Wang, R., Liu, J., Zhang, F. and Ding, X. (2021), "An approach to evaluate the sealing performance of sealing structures based on multiscale contact analyses", J. Comput. Des. Eng., 8(6), 1433-1445. https://doi.org/10.1093/jcde/qwab055.
  18. Wang, Z. and Zhang, J. (2016), "Corrosion of multiphase flow pipelines: The impact of crude oil", Corr. Rev., 34(1-2), 17-40. https://doi.org/10.1515/corrrev-2015-0053
  19. Wenk, J.F., Stephens, L.S., Lattime, S.B. and Weatherly, D. (2016), "A multi-scale finite element contact model using measured surface roughness for a radial lip seal", Tribol. Int., 97, 288-301. https://doi.org/10.1016/j.triboint.2016.01.035.
  20. Yan, Y., Zhai, J., Gao, P. and Han, Q. (2018), "A multi-scale finite element contact model for seal and assembly of twin ferrule pipeline fittings", Tribol. Int., 125, 100-109. https://doi.org/10.1016/j.triboint.2018.04.028.
  21. Yastrebov, V.A., Anciaux, G. and Molinari, J.F. (2015), "From infinitesimal to full contact between rough surfaces: Evolution of the contact area", Int. J. Solid. Struct., 52, 83-102. https://doi.org/10.1016/j.ijsolstr.2014.09.019.
  22. Yeoh, O.H. (2012), "Some forms of the strain energy function for rubber", Rub. Chem. Technol., 66(5), 754-771. https://doi.org/10.5254/1.3538343.
  23. Zhang, F., Shui, H.C. and Zhang, Y. (2019), "Parameter optimization of sealing performance for packer rubber", Indus. Lubric. Tribol., 71(5), 664-671. https://doi.org/10.1108/ilt-01-2019-0017.
  24. Zhang, H. and Zhang, J. (2016), "Static and dynamic sealing performance analysis of rubber D-ring based on FEM", J. Fail. Anal. Prev., 16(1), 165-172. https://doi.org/10.1007/s11668-016-0066-5.
  25. Zhang, J. and Xie, J. (2018), "Investigation of static and dynamic seal performances of a rubber O-ring", J. Tribol., 140(4), 042202. https://doi.org/10.1115/1.4038959.
  26. Zhang, S., Hou, L., Wei, H., Wei, Y. and Liu, B. (2018), "Failure analysis of an oil pipe wall perforated by pitting corrosion", Mater. Corr., 69(8), 1123-1130. https://doi.org/10.1002/maco.201709940.
  27. Zhang, W.M., Wang, Z.W., Zhang, H.Q., Lu, X.F. and Liu, Z. (2020), "Analytical study on free vertical and torsional vibrations of two-and three-pylon suspension bridges via d'Alembert's principle", Struct. Eng. Mech., 76(3), 293-310. https://doi.org/10.12989/sem.2020.76.3.293.
  28. Zheng, X. and Li, B. (2021), "Study on sealing performance of packer rubber based on stress relaxation experiment", Eng. Fail. Anal., 129, 105692. https://doi.org/10.1016/j.engfailanal.2021.105692.