DOI QR코드

DOI QR Code

Punching performance of RC slab-column connections with inner steel truss

  • Shi, Qingxuan (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Ma, Ge (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Guo, Jiangran (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Ma, Chenchen (State Key Laboratory of Green Building in Western China)
  • Received : 2020.04.12
  • Accepted : 2022.10.08
  • Published : 2022.09.25

Abstract

As a brittle failure mode, punching-shear failure can be widely found in traditional RC slab-column connections, which may lead to the entire collapse of a flat plate structure. In this paper, a novel RC slab-column connection with inner steel truss was proposed to enhance the punching strength. In the proposed connection, steel trusses, each of which was composed of four steel angles and a series of steel strips, were pre-assembled at the periphery of the column capital and behaved as transverse reinforcements. With the aim of exploring the punching behavior of this novel RC slab-column connection, a static punching test was conducted on two full-scaled RC slab specimens, and the crack patterns, failure modes, load-deflection and load-strain responses were thoroughly analyzed to explore the contribution of the applied inner steel trusses to the overall punching behavior. The test results indicated that all the test specimens suffered the typical punching-shear failure, and the higher punching strength and initial stiffness could be found in the specimen with inner steel trusses. The numerical models of tested specimens were analyzed in ABAQUS. These models were verified by comparing the results of the tests with the results of the analyzes, and subsequently the sensitivity of the punching capacity to different parameters was studied. Based on the test results, a modified critical shear crack theory, which could take the contribution of the steel trusses into account, was put forward to predict the punching strength of this novel RC slab-column connection, and the calculated results agreed well with the test results.

Keywords

Acknowledgement

The experiment mentioned in this paper was funded by the National Natural Science Foundation of China (Grant No. 51878540). The financial support is highly appreciated.

References

  1. Abu-Obeidah, A.S., Abdalla, J.A. and Hawileh, R.A. (2019), "Shear strengthening of deficient concrete beams with marine grade aluminium alloy plates", Adv. Concrete Constr., Int. J., 7(4), 249-262. https://doi.org/10.12989/acc.2019.7.4.249
  2. Adetifa, B. and Polak, M.A. (2005), "Retrofit of slab column interior connections using shear bolts", ACI Struct. J., 102(2), 268-273.
  3. Broms, C.E. (2019), "Cages of Inclined Stirrups as Shear Reinforcement for Ductility of Flat Slabs", ACI Struct. J., 116(1), 83-92. http://dx.doi.org/10.14359/51710871
  4. Dam, T.X. and Wight, J.K. (2016), "Flexurally-triggered punching shear failure of reinforced concrete slab-column connections reinforced with headed shear studs arranged in orthogonal and radial layouts", Eng. Struct., 110, 258-268. http://dx.doi.org/10.1016/j.engstruct.2015.11.050
  5. Dam, T.X., Wight, J.K. and Parra-Montesinos, G.J. (2017), "Behavior of Monotonically Loaded Slab-Column Connections Reinforced with Shear Studs", ACI Struct. J., 114(1), 221-232.
  6. Eder, M.A., Vollum, R.L., Elghazouli, A.Y. and Abdel-Fattah, T. (2010), "Modelling and experimental assessment of punching shear in flat slabs with shearheads", Eng. Struct., 32(12), 3911-3924. http://dx.doi.org/10.1016/j.engstruct.2010.09.004
  7. Einpaul, J., Brantschen, F., Ruiz, M.F. and Muttoni, A. (2016), "Performance of punching shear reinforcement under gravity loading: influence of type and detailing", ACI Struct. J., 113(4), 827-838. http://dx.doi.org/10.14359/51688630
  8. Eom, T.S., Song, J.W., Song, J.K., Kang, G.S., Yoon, J.K. and Kang S.M. (2017), "Punching-shear behavior of slabs with bar truss shear reinforcement on rectangular columns", Eng. Struct., 134, 390-399. http://dx.doi.org/10.1016/j.engstruct.2016.12.048
  9. Eom, T.S., Kang, S.M., Choi, T.W. and Park, H.G. (2018), "Punching Shear Tests of Slabs with High-Strength Continuous Hoop Reinforcement", ACI Struct. J., 115(5), 1295-1305. http://dx.doi.org/10.14359/51702231
  10. Hawileh, R.A., Nawaz, W., Abdalla, J.A. and Saqan, E.I. (2015), "Effect of flexural CFRP sheets on shear resistance of reinforced concrete beams", Compos. Struct., 122, 468-476. http://dx.doi.org/10.1016/j.compstruct.2014.12.010
  11. Hegger, J., Ricker, M. and Sherif, A.G. (2010), "Punching Strength of Reinforced Concrete Footings", ACI Struct. J., 107(4), 494-496.
  12. Jiang, M.Y. (2020), "Research on punching shear capacity of concrete slab-column connections with steel truss", M.Sc. Dissertation; Xi'an University of Architecture and Technology, Xi'an, China.
  13. Kang, T.H.K., Lee, J.D., Lee, B.S., Kim, M.J. and Kim, K.H. (2017), "Punching and Lateral Cyclic Behavior of Slab-Column Connections with Shear Bands", ACI Struct. J., 114(5), 1075-1086. http://dx.doi.org/10.14359/51689780
  14. Kee, J.H., Park, H.Y. and Seong, J.H. (2019), "Effect of one way reinforced concrete slab characteristics on structural response under blast loading", Adv. Concrete Constr., Int. J., 8(4), 277-283. https://doi.org/10.12989/acc.2019.8.4.277
  15. Lips, S., Ruiz, M.F. and Muttoni, A. (2012), "Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs", ACI Struct. J., 109(6), 889-900.
  16. Muttoni, A. (2008), "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J., 105(4), 440-450.
  17. Park, H.G., Ahn, K.S., Choi, K.K. and Chung, L. (2007), "Lattice shear reinforcement for slab-column connections", ACI Struct. J., 104(3), 294-303.
  18. Ruiz, M.F. and Muttoni, A. (2009), "Applications of the critical shear crack theory to punching of RC slabs with transverse reinforcement", ACI Struct. J., 106(4), 485-494.
  19. Tovi, S., Goodchild, C. and Ali, B. (2017), "Deformation of multistorey flat slabs, a site investigation", Adv. Concrete Constr., Int. J., 5(1), 49-63. https://doi.org/10.12989/acc.2017.5.1.049