DOI QR코드

DOI QR Code

온도에 따른 고분자전해질막의 기계적 특성에 관한 연구

A Study on the Mechanical Properties of Polymer Electrolyte Membrane according to Temperature

  • 어준우 (금오공과대학교 대학원 기계공학과) ;
  • 김승환 (금오공과대학교 대학원 기계공학과) ;
  • 서영진 (금오공과대학교 기계공학과) ;
  • 고형종 (금오공과대학교 기계공학과) ;
  • 황철민 ((주)자연에너지연구소) ;
  • 정영관 (금오공과대학교 기계공학과)
  • EO, JUNWOO (Graduate School of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • KIM, SEUNGHWAN (Graduate School of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • SEO, YOUNGJIN (Department of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • KO, HYUNGJONG (Department of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • HWANG, CHULMIN (Natural Energy Lab. Co.,Ltd) ;
  • JUNG, YOUNGGUAN (Department of Mechanical Engineering, Kumoh National Institute of Technology)
  • 투고 : 2022.09.28
  • 심사 : 2022.10.25
  • 발행 : 2022.10.30

초록

In this study, the mechanical properties of the polymer electrolyte membrane according to the temperature were studied. The test specimens of polymer electrolyte membrane were heat treated at 40℃, 60℃, 80℃, 100℃, and 120℃, and then the tensile tests were performed. As results of this study, the residual stress of the polymer electrolyte membrane was removes by the heat treatment and the elastic modulus decreased due to the decrease in internal energy. In addition, in the plastic region, the mechanical properties and crystallization rate of the polymer electrolyte membrane increased in proportion according to increase of the heat treatment temperature.

키워드

참고문헌

  1. World Meteorological Organization, "WMO greenhouse gas bulletin: the state of greenhouse gases in the atmosphere based on global observations through 2020", World Meteorological Organization, No. 17, 2021, pp. 110. Retrieved from https://reliefweb.int/report/world/wmogreenhousegasbulletinstategreenhousegasesatmospherebasedglobal2.
  2. M. C. Yoo, B. J. Chang, J. H. Kim, S. B. Lee, and Y. T. Lee, "Sulfonated perfluorocyclobutyl biphenylene polymer electrolyte membrane for fuel cells", Membrane Journal, Vol. 15, No. 4, 2005, pp, 355-362. Retrieved from https://scienceon.kisti.re.kr/commons/util/originalView.do?cn=JAKO200511722531612&oCn=JAKO200511722531612&dbt=JAKO&journal=NJOU00023047.
  3. S. Oh, J. W. Yang, C. H. Chu, I. C. Na, and K. P. Park, "Degradation evaluation of PEM water electrolysis by method of degradation analysis used in PEMFC", Korean Chem. Eng. Res., Vol. 59. No. 1, 2021, pp. 15, doi: https://doi.org/10.9713/kcer.2021.59.1.1.
  4. S. H. Kim, J. W. Eo, Y. J. Seo, C. M. Hwang, and Y. G. Jung, "A study on the change of mechanical property according to the aging of polymer electrolyte membrane", Trans Korean Hydrogen New Energy Soc, Vol. 33, No. 2, 2022, pp. 176-182, doi: https://doi.org/10.7316/KHNES.2022.33.2.176.
  5. D. Choi, Y. S. Lee, K. H. Yoon, S. W. Kim, and D. H. Ha, "Mechanical and flame retardant properties of SAN coated PC/PTFE composite", Polym. Korea, Vol. 44, No. 6, 2020, pp. 747-752, doi: https://doi.org/10.7317/pk.2020.44.6.747.
  6. K. A. Mauritz and R. B. Moore, "State of understanding of Nafion", Chem. Rev., Vol. 104, No. 10, 2004, pp. 45354586, doi: https://doi.org/10.1021/cr0207123.
  7. C. S. Brazel and S. L. Rosen, "Fundamental principles of polymeric materials", 3rd ed, Wiley, USA, 2012.
  8. J. Y. Lee and S. S. Park, "Annealing effect in the cold-plastic deformation of amorphous PET material", Polymer(Korea), Vol. 25, No. 1, 2001, pp. 55-62. Retrieved from https://www.koreascience.or.kr/article/JAKO200115875833009.pdf.
  9. N. Ramesh, P. K. Davis, J. M. Zielinski, R. P. Danner, and J. L. Duda, "Application of freevolume theory to self diffusion of solvents in polymers below the glass transition temperature: a review", Journal of Polymer Science Part B: Polymer Physics, Vol. 49, No. 23, 2011, pp. 1629-1644, doi: https://doi.org/10.1002/polb.22366.
  10. J. W. Woo and M. Y. Lyu, "Relationship between residual stress in the surface of an injection molded specimen and chemical crack", Polymer(Korea), Vol. 39, No. 5, 2015, pp. 827-829, doi: http://dx.doi.org/10.7317/pk.2015.39.5.827.
  11. D. C. Park, C. W. Park, D. H. Shin, and Y. H. Kim, "A Study on crystallization of thermoplastic aromatic polymer", Composites Research, Vol. 31, No. 2, 2018, pp. 63-68, doi: http://dx.doi.org/10.7234/composres.2018.31.2.063.