DOI QR코드

DOI QR Code

차량 롤 주행안정성 향상을 위한 RSC (Roll Stability Control) 성능 해석에 관한 연구

A Study on the Performance Analysis of RSC (Roll Stability Control) for Driving Stability of Vehicles

  • 투고 : 2022.08.03
  • 심사 : 2022.08.13
  • 발행 : 2022.10.31

초록

Active stabilizers use signals such as steering angle, yaw rate, and lateral acceleration to vary the roll stiffness of the front and rear suspension depending on the vehicle's driving conditions, and are attracting attention as RSC (Roll Stability Control) system that suppresses roll when turning and improves ride comfort when going straight. Various studies have been conducted in relation to active stabilizer bars and RSC systems. However, accurate modeling of passive stabilizer model and active stabilizer model and vehicle dynamics analysis result verification are insufficient, and performance result analysis related to vehicle roll angle estimation and electric motor control is insufficient. Therefore, in this study, an accurate vehicle dynamics model was constructed by measuring the passive/active stabilizer bar model and component parameters. Based on this, the analysis result with high reliability was derived by comparing the roll angle estimation algorithm based on the lateral acceleration and suspension of the vehicle with the actual vehicle driving test result. In addition, it was intended to accurately analyze the motor torque characteristics and roll reduction effects of the electric motor-driven RSC system.

키워드

과제정보

본 논문은 산업통상자원부와 한국산업기술진흥원이 지원하는 미래차 디지털 융합산업 실증 플랫폼 구축 과제 (P0018599)의 지원을 받아 수행하였음.

참고문헌

  1. D. Fuji, H. Yabumoto, S. Koumura, "Ride Comport Enhancement Using Active Stabilizer", SAE Paper No. 2018-01-0563, 2018.
  2. L. Xiao, M. Wang, B. Zhang. Z. Zhong, "Vehicle Roll Stability Control with Active Roll-resistant Electro-hydraulic Suspension", Frontiers of Mechanical Engineering, Vol. 15, pp. 43-54, 2020. https://doi.org/10.1007/s11465-019-0547-9
  3. Y. Zhang, L. Wang, R. Xia, "Sliding Mode Control of Electrical Active Roll Stabilizer Using Switched Reluctance Motor", SAE Paper No. 2018-01-0832, 2018.
  4. K. Lee, Y. Kim, J. Lee, S. Oh, J. Roh, H. Kim, I. Kim, J. Jang, "A Study on the Vehicle Dynamics Properties Using Active Roll Control Stabilizer bar System", Proceedings of 2010 KSAE Spring Conference, pp. 690-695, 2010. (in Korean)
  5. K. Jeon, S. Choi, W. Ko, J. Park, "A Study on Active Roll Control Algorithm for Sports Utility Vehicle", Proceedings of 2009 KSAE Spring Conference, pp. 601-606, 2009. (in Korean)
  6. C. Jeon, H. Na, S. H. You, "Development of Vehicle Roll Model for Active Suspension Control System", Transactions of KSAE, Vol. 28, No. 2, pp. 109-115, 2020. (in Korean) https://doi.org/10.7467/KSAE.2020.28.2.109
  7. J. Lee, Y. Kwon, H. Lee, "Using Lateral Acceleration and yaw rate, Sliding Observer Design for Roll Angle", Transactions of KSAE, Vol. 19, No. 4, pp. 38-46, 2011. (in Korean)
  8. J. M. Kim, S. J. Kwon, B. H. Lee, "A Study on the Mathematical Modeling for a Stabilizer of Passenger Vehicles", Proceedings of 2014 KSAE Spring Conference, pp. 1036-1037, 2014. (in Korean)
  9. S. H. Jeong, J. M. Kim, D. W. Lee, S. J. Kwon, B. H. Lee, "A Study on the Development of Roll Angle Estimation Algorithm for Active Roll Mitigation System", Proceedings of 2014 KSAE Spring Conference, pp. 596-597, 2014. (in Korean)
  10. R. V. Dukkipati, J. Pang, M. S. Qatu, G. Sheng, Z, Shuguang, "Road Vehicle Dynamics", SAE International, pp. 315-327, 2008,