DOI QR코드

DOI QR Code

Seismic behavior and design method of socket self-centering bridge pier with hybrid energy dissipation system

  • Guo, Mengqiang (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Men, Jinjie (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Fan, Dongxin (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Shen, Yanli (School of Civil Engineering, Hebei University of Engineering)
  • Received : 2022.04.10
  • Accepted : 2022.10.04
  • Published : 2022.09.25

Abstract

Seismic resisting self-centering bridge piers with high energy dissipation and negligible residual displacement after an earthquake event are focus topics of current structural engineering. The energy dissipation components of typical bridge piers are often relatively single; and exhibit a certain level of damage under earthquakes, leading to large residual displacements and low cumulative energy dissipation. In this paper, a novel socket self-centering bridge pier with a hybrid energy dissipation system is proposed. The seismic resilience of bridge piers can be improved through the rational design of annular grooves and rubber cushions. The seismic response was evaluated through the finite element method. The effects of rubber cushion thickness, annular groove depth, axial compression ratio, and lateral strength contribution ratio of rubber cushion on the seismic behavior of bridge piers are systematically studied. The results show that the annular groove depth has the greatest influence on the seismic performance of the bridge pier. Especially, the lateral strength contribution ratio of the rubber cushion mainly depends on the depth of the annular groove. The axial compression ratio has a significant effect on the ultimate bearing capacity. Finally, the seismic design method is proposed according to the influence of the above research parameters on the seismic performance of bridge piers, and the method is validated by an example. It is suggested that the range of lateral strength contribution ratio of rubber cushion is 0.028 ~ 0.053.

Keywords

Acknowledgement

The research described in this paper was financially supported by the National Key R&D Program of China (Grant No. 2019YFE0112900) and the National Natural Science Foundation of China (Grant No. 51878542, 51378169).

References

  1. Bruneau, M. and Reinhorn, A. (2007), "Exploring the concept of seismic resilience for acute care facilities", Earthq. Spectra, 23(1), 41-62. http://dx.doi.org/10.1193/1.2431396.
  2. Fang, C., Dong, L., Zheng, Y., Michael, C.H.Y. and Sun, R.Q. (2020), "Rocking bridge piers equipped with shape memory alloy (SMA) washer springs", Eng. Struct., 214(1), 110651. http://dx.doi.org/10.1016/j.engstruct.2020.110651.
  3. Akiyama, M., Matsuzaki, H., Dang, H.T. and Suzuki, M. (2012), "Reliability-based capacity design for reinforced concrete brige structures", Struct. Infrasturct. Eng., 8(12), 1096-1107. https://doi.org/10.1080/15732479.2010.507707.
  4. Ichikawa, S., Matsuzaki, H., Moustafa, A., ElGawady, M.A. and Kawashima, K. (2016), "Seismic-resistant bridge columns with ultrahigh-performance concrete segments", J. Struct. Eng., 21(9), 04016049. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000898.
  5. Xia, X.S., Zhang, X.Y., Shi, J. and Tang, J.Y. (2021a), "Seismic isolation of railway bridges using a self-centering pier", Smart Struct. Syst., 27(3), 447-455. http://dx.doi.org/10.12989/sss.2021.27.3.447.
  6. Xia, X.S., Wu, S.W., Wei, X.H., Jiao, C.Y. and Chen, X.C. (2021b), "Experimental and numerical study on seismic behavior of a self-centering railway bridge pier", Earthq. Struct., 21(2), 173-183. https://doi.org/10.12989/eas.2021.21.2.173.
  7. Piras, S., Palermo, A. and Saiid Saiidi, M. (2022), "State-of-the-art of post-tensioned rocking bridge substructure systems", J. Bridge Eng., 27(3), 03122001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001833.
  8. Han Q, Jia, Z.L., Xu, K., Zhou, Y.L. and Du, X.L. (2019), "Hysteretic behavior investigation of self-centering doublecolumn rocking piers for seismic resilience", Eng. Struct., 188, 218-232. https://doi.org/10.1016/j.engstruct.2019.03.024.
  9. Cao, Z.L., Guo, T., Xu, Z.K. and Lu, S. (2015a), "Theoretical analysis of self-centering concrete piers with external dissipators", Earthq. Struct., 9(6), 1313-1336. https://doi.org/10.12989/eas.2015.9.6.1313.
  10. Cao, Z.L., Wang, H. and Guo, T. (2016b), "Fragility analysis of self-centering prestressed concrete bridge pier with externalaluminum dissipators", Adv. Struct. Eng., 20(8), 1210-1222. https://doi.org/10.1177%2F1369433216673376. https://doi.org/10.1177%2F1369433216673376
  11. Mitoulis, S.A. and Rodriguez, J.R. (2017), "Seismic performance of novel resilient hinges for columns and application on irregular bridges", J. Bridge Eng., 22(2), 04016114. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000980.
  12. Rodgers, G.W., Mander, J.B., Chase, J.G. and Dhakal, R.P. (2016), "Beyond ductility: parametric testing of a jointed rocking beamcolumn connection designed for damage avoidance", J. Struct. Eng., 142(8), C4015006. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001318.
  13. Sideris, P., Aref, A.J. and Filiatrault, A. (2014), "Quasistatic cyclic testing of a large-scale hybrid sliding rocking segmental column with slip-dominant joints", J. Bridge Eng., 19(10), 04014036. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000605.
  14. Ou, Y.C., Tsai, M.S., Chang, K.C. and Lee, G.C. (2010), "Cyclicbehavior of precast segmental concrete bridge columns withhigh performance or conventional steel reinforcing bars as energy dissipation bars", Earthq. Eng. Struct. Dyn., 39(11), 1181-1198. https://doi.org/10.1002/eqe.986.
  15. Guo, T., Cao, Z.L., Xu, Z.K. and Lu, S. (2015), "Cyclic load tests on self-centering concrete pier with external dissipators and enhanced durability", J. Struct. Eng., 142(1), 04015088. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001357.
  16. Wang, Z., Wang, J.Q., Tang, Y.C., Liu, T.X., Gao, Y.F. and Zhang, J. (2018), "Seismic behavior of precast segmental UHPC bridge columns with replaceable external cover plates and internal dissipaters", Eng. Struct., 177, 540-555. https://doi.org/10.1016/j.engstruct.2018.10.012.
  17. Guerrini, G., Restrepo, J.I., Massari, M. and Vervelidis, A. (2014), "Seismic behavior of post-tensioned self-centering precast concrete dual-shell steel columns", J. Struct. Eng., 141(4), 04014115. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001054.
  18. Mohebbi, A., Saiidi, M.S. and Itani, A.M. (2018), "Shake table studies and analysis of a PT-UHPC bridge column with pocket connection", J. Struct. Eng., 144(4), 04018021. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001997.
  19. Guo, J., Xin, K.G., He, M.H. and Hu, L. (2012), "Experimental study and analysis on the seismic performance of a selfcentering bridge pier", Eng. Mech., 29(S1), 29-34+45. https://dx.doi.org/10.6052/j.issn.1000-4750.2011.11.S036.
  20. Zhang, L., Li, Z.H. and Ma, X.Q. (2018), "Study on parameter characteristics of rubber Mooney-Rivlin model", Noise Vib. Control, 38(S2), 427-430. https://dx.doi.org/10.3969/j.issn.1006-1355.2018.Z1.091.
  21. Yoshida, N. (2014), "Comparison of seismic ground response analyses under large earthquakes", Indian Geotech. J., 44(2), 119-131. https://dx.doi.org/10.1007/s40098-014-0104-8.
  22. Palermo, A. and Pampanin, S. (2008), "Enhanced seismic performance of hybrid bridge systems: Comparison with traditional monolithic solutions", J. Earthq. Eng., 12(8), 1267-1295. https://doi.org/10.1080/13632460802003819.