참고문헌
- Abaqus (2018), User's Manual.
- Ahmadi, M. M. and Jazebi, M. (2018), "Side Resistance of Drilled Shaftsin Sandy Soils" 11th international congress on civil engineering, Tehran, Iran. pp.1-7.
- Busan Port Authority (2018), Busan Port (North Port) Redevelopment Project Connection Bridge (Phase 1) Construction, Design report.
- Cater, J. R. and Kulhawy, F. H. (1988), Analyisis and Design of Drilled Shaft Foundations Socketed into Rock, Report No. EPRL. EL-5918, Geotechnical Engineering Group, Cornell Univ.
- Choi, Y. K. (1999), "Suggestions for Improvement of Domestic Pile Foundation Design Routine - At a Viewpoint of Pile Bearing Capacity", Journal of the Korean Society of Civil Engineers, Vol.19, No.III-3, pp.467-477.
- Chun, B. S., Kim, S. M., Park, J. S. and Kim, E. S. (2006), "A Case Study on Evaluation of Bearing Capacity for Axially Loaded Drilled Shafts in Weathered Rock", In proceedings of the Korean Society of Civil Engineers, pp.4422-4425.
- Davisson, M. T. (1973), High Capacity of Piles, Proceedings of Lecture Series on Innovation in Foundation Construction, Illinois section, Chicago, pp.81-112.
- FHWA (1999), Drilled Shafts: Construction Procedures and Design Methods, FHWA Publication No. FHWA-IF-99-025. Department of Transportation, McLean, VA, Federal Highway Administration, Office of Implementation.
- Hong, W. P., Yea, G. G. and Lee, J. H. (2005), "Evaluation of Skin Friction on Large Drilled Shaft" Journal of the Korean Geotechnical Society, Vol.21, No.1, pp.93-103.
- Jung, S. J. (2010), Calibration of Resistance Factors of Load and Resistance Factor Design for Drilled Shafts Embedded in Weathered Rock, Seoul National Univ. Doctor's Thesis.
- Kim, D. Y., Joun, D. H. and Lee, Y. D. (2003), "Evaluation of Side Friction for Drilled Shafts Embedded in Weathered Rocks" In proceedings of the Korean Society of Civil Engineers, pp.3338-3341.
- Korean Geotechnical Society (2018), Explanation of Foundation Design Standards for Structures, CIR.
- Korean Society of Civil Engineers & Korea Bridge Design Engineering Research Center (2008), Highway Bridge Design Criteria, Kimoondang, pp.41 (in Korean).
- Kulhawy, F. H. and Phoon, K. K. (1993), "Drilled Shaft Side Resistance on Clay Soil to Rock", In Proceedings of the Conference on Design and Performance of Deep Foundations: Piles and Piers on Soil and Soft Rock, ASCE, Geotechnical Special Publocation 38, pp.172-183.
- Kwon, O. S., Cho, S. M., Jung, S. J. and Kim, M. M. (2005), "Load Transfer Mechanism of Drilled Shafts in Weathered Rock", Journal of the Korean Geotechnical Society, Vol.21, No.5, pp.187-196.
- Ministry of Land, Infrastructure and Transport (2016), Korean Highway Bridge Design Code (Limit State Design).
- Seo, Y. S., Yun, H. S., Kim, D. G. and Kown, O. I. (2016), "Analysis on Physical and Mechanical Properties of Rock Mass in Korea", The Journal of Engineering Geology, Vol.26, No.4, pp.593-600. https://doi.org/10.9720/KSEG.2016.4.593
- Seol, H. I, Jeong, S. S. and Kim, Y. H. (2008), Load-Transfer Analysis by Considering Coupled Soil Resistance, KSCE Journal of Civil and Environmental Engineering Research, Vol.28, No.6C, pp.359-366. https://doi.org/10.12652/KSCE.2008.28.6C.359
- Seol, H. I. (2008), Load Transfer Analysis of Rock-socketed Drilled Shafts by Considering Coupled Soil Resistance, Yonsei Univ. Doctor's Thesis.
- Zhang, L. and Einstein, H. (1988), "Estimationg the Mean Trace Length of Rock Discountinuities", International Journal of Rock Mechanics and Rock Engineering, Vol.31, No.4, pp.217-235. https://doi.org/10.1007/s006030050022