Acknowledgement
This work was supported by the Project of the National Natural Science Foundation of China [grant number 52075235].
References
- S.J. Zinkle, G.S. Was, Materials challenges in nuclear energy, Acta Mater. 61 (2013) 735-758. https://doi.org/10.1016/j.actamat.2012.11.004
- Y.S. Lim, S.S. Hwang, D.J. Kim, J.Y. Lee, Corrosion behavior of SA508 low alloy steels exposed to aerated boric acid solutions, Nucl. Eng. Technol. 52 (2020) 1222-1230. https://doi.org/10.1016/j.net.2019.11.031
- Y.S. Lim, D.J. Kim, S.W. Kim, H.P. Kim, Crack growth and cracking behavior of Alloy 600/182 and Alloy 690/152 welds in simulated PWR primary water, Nucl. Eng. Technol. 51 (2019) 228-237. https://doi.org/10.1016/j.net.2018.09.011
- Y. Li, J. Wang, E. Han, C. Yang, Structural, mechanical and corrosion studies of Cr-rich inclusions in 152 cladding of dissimilar metal weld joint, J. Nucl. Mater. 498 (2018) 9-19. https://doi.org/10.1016/j.jnucmat.2017.10.012
- W. Wang, X. Cao, Y. Lu, X. Ding, T. Shoji, TEM study on oxide mechanism of the dissimilar welds between 316 stainless steels/Inconel 182 in high temperature and high pressure water, Mater. Char. 131 (2017) 339-347. https://doi.org/10.1016/j.matchar.2017.07.004
- G. Li, X. Lu, X. Zhu, J. Huang, L. Liu, Y. Wu, The defects and microstructure in the fusion zone of multipass laser welded joints with Inconel 52M filler wire for nuclear power plants, Opt Laser. Technol. 94 (2017) 97-105. https://doi.org/10.1016/j.optlastec.2017.02.005
- E. Rahimi, A. Rafsanjani-Abbasi, A. Imani, S. Hosseinpour, A. Davoodi, Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM, Corros. Sci. 140 (2018) 30-39. https://doi.org/10.1016/j.corsci.2018.06.026
- B.O. Okonkwo, H. Ming, Z. Zhang, J. Wang, E. Rahimi, S. Hosseinpour, A. Davoodi, Microscale investigation of the correlation between microstructure and galvanic corrosion of low alloy steel A508 and its welded 309/308L stainless steel overlayer, Corros. Sci. 154 (2019) 49-60. https://doi.org/10.1016/j.corsci.2019.03.027
- A. Bautista, J.C. Pomares, M.N. Gonzalez, F. Velasco, Influence of the microstructure of TMT reinforcing bars on their corrosion behavior in concrete with chlorides, Construct. Build. Mater. 229 (2019) 116899. https://doi.org/10.1016/j.conbuildmat.2019.116899
- W. Mai, S. Soghrati, New phase field model for simulating galvanic and pitting corrosion processes, Electrochim. Acta 260 (2018) 290-304. https://doi.org/10.1016/j.electacta.2017.12.086
- H. Ming, R. Zhu, Z. Zhang, J. Wang, E.H. Han, W. Ke, M. Su, Microstructure, local mechanical properties and stress corrosion cracking susceptibility of an SA508-52M-316LN safe-end dissimilar metal weld joint by GTAW, Mater. Sci. Eng. 669 (2016) 279-290. https://doi.org/10.1016/j.msea.2016.05.101
- Y. Xu, H. Jing, L. Xu, Y. Han, L. Zhao, Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment, Corros. Sci. 163 (2020) 108286. https://doi.org/10.1016/j.corsci.2019.108286
- J. Chen, Q. Xiao, Z. Lu, X. Ru, H. Peng, Q. Xiong, H. Li, Characterization of interfacial reactions and oxide films on 316L stainless steel in various simulated PWR primary water environments, J. Nucl. Mater. 489 (2017) 137-149. https://doi.org/10.1016/j.jnucmat.2017.03.029
- J. Chen, A. Nurrochman, J. Hong, T.S. Kim, C. Jang, Y. Yi, Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment, Nucl. Eng. Technol. 51 (2019) 479-489. https://doi.org/10.1016/j.net.2018.10.007
- T.H. Lee, K.H. Ryu, H.D. Kim, I.S. Hwang, J.H. Kim, M.H. Lee, S. Choi, Effect of oxide film on ECT detectability of surface IGSCC in laboratory-degraded alloy 600 steam generator tubing, Nucl. Eng. Technol. 51 (2019) 1381-1389. https://doi.org/10.1016/j.net.2019.03.005
- T. Moss, W. Kuang, G.S. Was, Stress corrosion crack initiation in Alloy 690 in high temperature water, Curr. Opin. Solid State Mater. Sci. 22 (2018) 16-25. https://doi.org/10.1016/j.cossms.2018.02.001
- Z. Shen, D. Du, L. Zhang, S. Lozano-Perez, An insight into PWR primary water SCC mechanisms by comparing surface and crack oxidation, Corros. Sci. 148 (2019) 213-227. https://doi.org/10.1016/j.corsci.2018.12.020
- X. Ru, Z. Lu, J. Chen, G. Han, J. Zhang, P. Hu, X. Liang, Effects of iron content in Ni-Cr-xFe alloys and immersion time on the oxide films formed in a simulated PWR water environment, J. Nucl. Mater. 497 (2017) 37-53. https://doi.org/10.1016/j.jnucmat.2017.10.048
- X. Ru, J. Ma, Z. Lu, J. Chen, G. Han, J. Zhang, P. Hu, X. Liang, W. Tang, Effects of iron content in Ni-Cr-Fe alloys on the oxide films formed in an oxygenated simulated PWR water environment, J. Nucl. Mater. 509 (2018) 29-42. https://doi.org/10.1016/j.jnucmat.2018.06.014
- J. Chen, A. Nurrochman, J. Hong, T.S. Kim, C. Jang, Y. Yi, Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment, Nucl. Eng. Technol. 51 (2019) 479-489. https://doi.org/10.1016/j.net.2018.10.007
- I. Adlakha, B.G. Bazehhour, N.C. Muthegowda, K.N. Solanki, Effect of mechanical loading on the galvanic corrosion behavior of a magnesium-steel structural joint, Corros. Sci. 133 (2018) 300-309. https://doi.org/10.1016/j.corsci.2018.01.038
- Z. Cui, Z. Liu, L. Wang, X. Li, C. Du, X. Wang, Effect of plastic deformation on the electrochemical and stress corrosion cracking behavior of X70 steel in nearneutral pH environment, Mater. Sci. Eng. 677 (2016) 259-273. https://doi.org/10.1016/j.msea.2016.09.033
- T. Wu, M. Yan, J. Xu, Y. Liu, C. Sun, W. Ke, Mechano-chemical effect of pipeline steel in microbiological corrosion, Corros. Sci. 108 (2016) 160-168. https://doi.org/10.1016/j.corsci.2016.03.011
- B. Mingo, R. Arrabal, A. Pardo, E. Matykina, P. Skeldon, 3D study of intermetallics and their effect on the corrosion morphology of rheocast aluminium alloy, Mater. Char. 112 (2016) 122-128. https://doi.org/10.1016/j.matchar.2015.12.006
- R. Zhu, J. Wang, Z. Zhang, E. Han, Stress corrosion cracking of fusion boundary for 316L/52M dissimilar metal weld joints in borated and lithiated high temperature water, Corros. Sci. 120 (2017) 219-230. https://doi.org/10.1016/j.corsci.2017.01.024
- X. Ma, C. Huang, J. Moering, M. Ruppert, H.W. Hoppel, M. Goken, J. Narayan, Y. Zhu, Mechanical properties of copper/bronze laminates: role of interfaces, Acta Mater. 116 (2016) 43-52. https://doi.org/10.1016/j.actamat.2016.06.023
- L.P. Kubin, A. Mortensen, Geometrically necessary dislocations and straingradient plasticity: a few critical issues, Scripta Mater. 48 (2003) 119-125. https://doi.org/10.1016/S1359-6462(02)00335-4
- H. Gao, Y. Huang, W.D. Nix, J.W. Hutchinson, Mechanism-based strain gradient plasticity-I. Theory, J. Mech. Phys. Solid. 47 (1999) 1239-1263. https://doi.org/10.1016/S0022-5096(98)00103-3
- Z. Chen, Z. Sun, B. Panicaud, Investigation of ductile damage during surface mechanical attrition treatment for TWIP steels using a dislocation density based viscoplasticity and damage models, Mech. Mater. 129 (2019) 279-289. https://doi.org/10.1016/j.mechmat.2018.12.009
- Y. Gui, X.B. Meng, Z.J. Zheng, Y. Gao, Critical temperature determination of detectable Cr diffusion enhancement by nanostructure through structural evolution analysis of the oxide films at 25-450℃ on 304 stainless steel, Appl. Surf. Sci. 419 (2017) 512-521. https://doi.org/10.1016/j.apsusc.2017.04.133
- J. Huang, X. Wu, E. Han, Electrochemical properties and growth mechanism of passive films on Alloy 690 in high-temperature alkaline environments, Corros. Sci. 52 (2010) 3444-3452. https://doi.org/10.1016/j.corsci.2010.06.016
- X. Guo, K. Chen, W. Gao, Z. Shen, L. Zhang, Corrosion behavior of aluminaforming and oxide dispersion strengthened austenitic 316 stainless steel in supercritical water, Corros. Sci. 138 (2018) 297-306. https://doi.org/10.1016/j.corsci.2018.04.026
- M. Halvarsson, J.E. Tang, H. Asteman, J.E. Svensson, L.G. Johansson, Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600℃, Corros. Sci. 48 (2006) 2014-2035. https://doi.org/10.1016/j.corsci.2005.08.012
- S. Wang, Y. Hu, K. Fang, W. Zhang, X. Wang, Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water, Corros. Sci. 126 (2017) 104-120. https://doi.org/10.1016/j.corsci.2017.06.019
- H. Ming, Z. Zhang, J. Wang, R. Zhu, J. Ding, J. Wang, E. Han, W. Ke, Effect of surface state on the oxidation behavior of welded 308L in simulated nominal primary water of PWR, Appl. Surf. Sci. 337 (2015) 81-89. https://doi.org/10.1016/j.apsusc.2015.02.066
- S. Hu, R. Liu, L. Liu, Y. Cui, E.E. Oguzie, F. Wang, Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy, Corros. Sci. 163 (2020) 108242. https://doi.org/10.1016/j.corsci.2019.108242
- E.M. Gutman, Mechanochemistry and Corrosion Prevention of Metals, Science Publication, Beijing, 1989 in Chinese.
- C. Ornek, D.L. Engelberg, SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel, Corros. Sci. 99 (2015) 164-171. https://doi.org/10.1016/j.corsci.2015.06.035