과제정보
This study was supported by the Shiraz University of Medical Sciences (Extracted from doctoral dissertation. Approved code of ethics: IR.SUMS.REC.1400.395).
참고문헌
- Sohrabi C, Alsafi Z, O'Neill N, Khan M, Kerwan A, Al-Jabir A, et al. World Health Organization declares global emergency: a review of the 2019 novel coronavirus (COVID-19). Int J Surg 2020;76:71-6. https://doi.org/10.1016/j.ijsu.2020.02.034
- OSHA. Occupational Safety and Health Administration, Guidance on Preparing Workplaces for COVID-19. Available from: http://www.osha.gov/Publications/OSHA3990.pdf.%2020.
- WHO.. Protecting the health workers who protect us all. Available from: https://www.who.int/news-room/feature-stories/detail/protecting-thehealth-workers-who-protect-us-all Sep 17, 2020; Sep 17, 2020.
- Jahangiri M, Cousins R, Gharibi V. Let's get back to work: preventive biological cycle management of COVID-19 in the workplace. Work 2020;66:713-6. https://doi.org/10.3233/WOR-203217
- Matuschek C, Moll F, Fangerau H, Fischer JC, Zanker K, van Griensven M, et al. Face masks: benefits and risks during the COVID-19 crisis. Eur J Med Res 2020;25:32. https://doi.org/10.1186/s40001-020-00430-5
- Bar-On YM, Flamholz A, Phillips R, Milo R. SARS-CoV-2 (COVID-19) by the numbers. eLife 2020;9:e57309. https://doi.org/10.7554/eLife.57309
- Mhango M, Dzobo M, Chitungo I, Dzinamarira T. COVID-19 risk factors among health workers: a rapid review. Saf Health Work 2020;11:262-5.. https://doin.org/10.1016/j.shaw.2020.06.001.
- Aydin O, Emon B, Cheng S, Hong L, Chamorro LP, Saif MTA. Performance of fabrics for home-made masks against the spread of COVID-19 through droplets: a quantitative mechanistic study. Extreme Mechanics Lett 2020;40:100924. https://doi.org/10.1016/j.eml.2020.100924
- Mumma JM, Jordan E, Ayeni O, Kaufman N, Wheatley MJ, Grindle A, et al. Development and validation of the discomfort of cloth Masks-12 (DCM-12) scale. Appl Ergon 2022;98:103616. https://doi.org/10.1016/j.apergo.2021.103616
- Rogak SN, Sipkens TA, Guan M, Nikookar H, Vargas Figueroa D, Wang J. Properties of materials considered for improvised masks. Aerosol Sci Technol 2021;55:398-413. https://doi.org/10.1080/02786826.2020.1855321
- Bhattacharjee S, Bahl P, Chughtai AA, MacIntyre CR. Last-resort strategies during mask shortages: optimal design features of cloth masks and decontamination of disposable masks during the COVID-19 pandemic. BMJ Open Respir Res 2020;7:e000698. https://doi.org/10.1136/bmjresp-2020-000698
- Breaux J, Jones K, Boulas P. Analytical methods development and validation. Pharm Technol 2003;1:6-13.
- Benson J, Clark F. A guide for instrument development and validation. Am J Occup Ther 1982;36:789-800. https://doi.org/10.5014/ajot.36.12.789
- UNE-EN. UNE-EN 14683:2019+AC:2019. Medical face masks - requirements and test methods; 2019.
- Hsieh H-F, Shannon SE. Three approaches to qualitative content analysis. Qual Health Res 2005;15:1277-88. https://doi.org/10.1177/1049732305276687
- Holsti O. Content analysis for the social sciences and humanities. Reading, MA: Addison-Wesley; 1969. 235 p.
- Polit DF, Beck CT, Owen SV. Is the CVI an acceptable indicator of content validity? Appraisal and recommendations. Res Nurs Health 2007;30:459-67. https://doi.org/10.1002/nur.20199
- Lawshe CH. A quantitative approach to content validity. Personnel Psychol 1975;28:563-75. https://doi.org/10.1111/j.1744-6570.1975.tb01393.x
- Waltz CF, Bausell RB. Nursing research: design, statistics, and computer analysis. FA Davis company; 1983. 362 p.
- Broder HL, McGrath C, Cisneros GJ. Questionnaire development: face validity and item impact testing of the Child Oral Health Impact Profile. Community Dent Oral Epidemiol 2007;35(Suppl. 1):8-19. https://doi.org/10.1111/j.1600-0528.2007.00401.x
- Yen M, Lo L-H. Examining test-retest reliability: an intra-class correlation approach. Nurs Res 2002;51:59-62. https://doi.org/10.1097/00006199-200201000-00009
- McGhee JT, Buckley JC, Gannon M, Waterston S. COVID-19: surgical masks and respirators in the operating theatre. B J Surg 2020;107(10):e438-. https://doi.org/10.1002/bjs.11888
- Howard J, Huang A, Li Z, Tufekci Z, Zdimal V, van der Westhuizen H-M, et al. An evidence review of face masks against COVID-19. Proc Nat Acad Sci 2021;118:e2014564118. https://doi.org/10.1073/pnas.2014564118
- Lam SC, Lui AKF, Lee LYK, Lee JKL, Wong KF, Lee CNY. Evaluation of the user seal check on gross leakage detection of 3 different designs of N95 filtering facepiece respirators. Am J Infect Control 2016;44:579-86. https://doi.org/10.1016/j.ajic.2015.12.013
- Chughtai AA, Seale H, Dung TC, Hayen A, Rahman B, Raina MacIntyre C. Compliance with the use of medical and cloth masks among healthcare workers in vietnam. Ann Occup Hyg 2016;60:619-30. https://doi.org/10.1093/annhyg/mew008
- Das D, Pourdeyhimi B. Composite non-woven materials: structure, properties and applications 2014. 233 p.
- Xiao Y, Sakib N, Yue Z, Wang Y, Cheng S, You J, et al. Study on the relationship between structure parameters and filtration performance of polypropylene meltblown nonwovens. AUTEX Res J 2020;20:366-71. https://doi.org/10.2478/aut-2019-0029
- Tsai P. Performance of masks and discussion of the inactivation of SARS-CoV2. Engineered Sci 2020;10:1-7.
- Sinha-Ray S, Yarin AL, Pourdeyhimi B. Meltblown fiber mats and their tensile strength. Polymer 2014;55:4241-7. https://doi.org/10.1016/j.polymer.2014.05.025
- Garcia RA, Stevanovic T, Berthier J, Njamen G, Tolnai B, Achim A. Cellulose, nanocellulose, and antimicrobial materials for the manufacture of disposable face masks: a review. BioResources 2021;16(2).
- Aizenshtein E. Nonwoven materials: production and use. Fibre Chem 2005;37:307-14. https://doi.org/10.1007/s10692-005-0102-9
- Kara Y, Molnar K. Revealing of process-structure-property relationships of fine polypropylene fiber mats generated via melt blowing. Polym Advan Technol 2021;32:2416-32. https://doi.org/10.1002/pat.5270
- Duran K, Duran D, Oymak G, Kilic K, O Ezgi, Mehmet K. Investigation of the physical properties of meltblown nonwovens for air filtration. Textile Apparel 2013;23:136-42.
- Dutton KC. Overview and analysis of the meltblown process and parameters. J Textile Apparel Technol Manage 2009;6.
- Kucukali Ozturk M, Venkataraman M, Mishra R. Influence of structural parameters on thermal performance of polypropylene nonwovens. Polym Advan Technol 2018;29:3027-34. https://doi.org/10.1002/pat.4423
- Gibson P, Schreuder-Gibson H. Patterned electrospray fiber structures. Int Nonwovens J 2004. 1558925004os-1300211.
- UNE-EN 149:2001+A1:2010 UNE-EN. Respiratory Protective Devices. Filtering half mask to protect against particles. Requirements, testing. marking; 2010.
- Vanhooydonck A, Van Goethem S, Van Loon J, Vandormael R, Vleugels J, Peeters T, et al. Case study into the successful emergency production and certification of a filtering facepiece respirator for Belgian hospitals during the COVID-19 pandemic. J Manufact Syst 2021;60:876-92. https://doi.org/10.1016/j.jmsy.2021.03.016
- Tessarolo F, Nollo G, Benedetti L, Helfer F, Rovati L, Ferrari A, et al. Measuring breathability and bacterial filtration efficiency of face mask in the pandemic context: a round robin study with proficiency testing among non-accredited laboratories. Measurement 2022;189:110481. https://doi.org/10.1016/j.measurement.2021.110481
- Taborri J, Stocchi B, Calabro G, Rossi S. On the breathability measurement of surgical masks: uncertainty, repeatability, and reproducibility analysis. IEEE Transact Instrument Meas 2022;71:111709.