DOI QR코드

DOI QR Code

Effect of silicone rubber-sleeve mounted on shear studs on shear stiffness of steel-concrete composite structures

  • Yang, Chang (Department of Road and Bridge Engineering, Wuhan University of Technology) ;
  • Yang, Decan (Department of Road and Bridge Engineering, Wuhan University of Technology) ;
  • Huang, Caiping (Department of Road and Bridge Engineering, Hubei University of Technology) ;
  • Huang, Zhixiang (Department of Road and Bridge Engineering, Hubei University of Technology) ;
  • Ouyang, Lizhi (Department of Physics and Mathematics, Tennessee State University) ;
  • Onyebueke, Landon (Department of Mechanical Manufacturing Engineering, Tennessee State University) ;
  • Li, Lin (Department of Civil and Architectural Engineering, Tennessee State University)
  • 투고 : 2019.10.28
  • 심사 : 2022.09.05
  • 발행 : 2022.09.10

초록

Earlier works have shown that excessive shear stiffness at the steel-concrete interface causes a non-uniform distribution of shear force in composite structures. When the shear studs are wrapped at the fixed end with flexible materials with a low elastic modulus, the shear stiffness at the interface is reduced. The objective of this study was to investigate the effect of silicone rubber-sleeve mounted on shear studs on the shear stiffness of steel-concrete composite structures. Eighteen push-out tests were conducted to investigate the mechanical behavior of silicone rubber-sleeved shear stud groups (SRS-SSG). The dimension and arrangement of silicon rubber-sleeves (SRS) were taken into consideration. Test results showed that the shear strength of SRS-SSG was higher than that of a shear stud group (SSG), without SRS. For SRS-SSG with SRS heights of 50 mm, 100 mm, 150 mm, the shear strengths were improved by 13%, 20% and 9%, respectively, compared to the SSG alone. The shear strengths of SRS-SSG with the SRS thickness of 2 mm and 4 mm were almost the same. The shear stiffness of the SRS-SSG specimens with SRS heights of 50 mm, 100 mm and 150 mm were 77%, 67% and 66% of the SSG specimens, respectively. Test results of specimens SSG-1 and predicted values based on the three design specifications were compared. The nominal single stud shear strength of SSG-1 specimens was closest to that calculated by the Chinese Code for Design of Steel Structures (GB50017-2017). An equation is proposed to consider the effects of SRS for GB50017-2017, and the predicted values based on the proposed equation agree well with the tested results of SRS-SSG.

키워드

과제정보

The push-out test in this research was financially supported by the National Natural Science Foundation of China (Grant No. 51708188). The support is gratefully acknowledged. The authors would like to give our special thanks to Dr. Lian Duan, Senior Bridge Engineer, Ms. Kammy Bhala, Senior Bridge Engineer (retired), and Mr. Edward Thometz, Senior Bridge Engineer, California Department of Transportation, USA, for their valuable input and comments.

참고문헌

  1. AASHTO (2017), AASHTO LFRD bridge design specifications, 8th edition, American Associate of State Highway and Transportation Officials; Washington DC, USA.
  2. An, L. and Cederwall, K. (1996), "Push-out tests on studs in high strength and normal strength concrete", J. Constr. Steel Res., 36(1), 15-29. https://doi.org/10.1016/0143-974X(94)00036-H.
  3. Badie S.S., Tadros M.K., Kakish H.F., Splittgerber D.L. and Baishya M.C. (2002), "Large shear studs for composite action in steel bridge girders", J. Bridge. Eng. (ASCE), 7(3), 195-203. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:3(195).
  4. Classen, M., Herbrand, M., Kueres, D. and Hegger, J. (2016), "Derivation of design rules for innovative shear connectors in steel-concrete composites through the systematic use of nonlinear finite element analysis (FEA)", Struct. Concr., 17(4), 646-655. https://doi.org/10.1002/suco.201500217.
  5. Eurocode 4 (2004), Eurocode 4: Design of Composite Steel and Concrete Structures, Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization; Brussels, Belgium.
  6. Galuppi, L. and Royer-Carfagni, G. (2016), "Effective width of the slab in composite beams with nonlinear shear connection", J. Eng. Mech. (ASCE), 142(4), 04016001. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001042.
  7. GB 50017-2017 (2017), Code for Design of Steel Structures, Ministry of Housing and Urban-rural Development of Peoples' Republic of China (in Chinese), Beijing, China.
  8. GB/T 50081-2019 (2019), Standard for Test Methods of Concrete Physical and Mechanical Properties, Ministry of Housing and Urban-rural Development of Peoples' Republic of China (in Chinese); Beijing, China.
  9. He, Y.H., Wu, X.D., Xiang, Y.Q., Wang, Y.H., Liu, L.S and He, Z.H. (2017), "Mechanical behavior of stud shear connectors embedded in HFRC", Steel Compos. Struct., 24(2), 177-189. https://doi.org/10.12989/scs.2017.24.2.177
  10. Hiragi, H., Matsui, S. and Muto, K. (1998), "Development of favorable stud shear connectors to flexible composite actions", J. Struct. Eng. (JSCE), 44A(3), 1485-1496 (in Japanese).
  11. Johnson R.P. and May I.M. (1975). "Partial-interaction design of composite beams", Struct. Eng., 8, 305-311.
  12. JSCE (2007), Standard Specification for Steel and Composite Structures (design edition), Committee of Steel Structure (in Japanese).
  13. Lam, D. and El-Lobody, E. (2005), "Behavior of headed stud shear connectors in composite beam", J. Struct. Eng. (ASCE), 131(1), 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(96).
  14. Le, V.P.N, Bui, D.V., Chu, T.H.V., Kim, I.T., Ahn, J.H. and Dao, D.K. (2016) "Behavior of steel and concrete composite beams with a newly puzzle shape of crestbond rib shear connector: an experimental study", Struct. Eng. Mech., 60(6), 1001-1019. https://doi.org/10.12989/sem.2016.60.6.1001.
  15. Lim, O.K., Choi, S., Kang, S., Kwon, M. and Choi, J.Y. (2019), "Experimental studies on the behaviour of headed shear studs for composite beams in fire", Steel Compos. Struct., 32(6), 743-752. https://doi.org/10.12989/scs.2019.32.6.743.
  16. Machacek, J. and Cudejko, M. (2011), "Composite steel and concrete bridge trusses", Eng. Struct., 33(12), 3136-3142. https://doi.org/10.1016/j.engstruct.2011.08.017.
  17. Oehlers, D.J. and Coughlan, C.G. (1986), "The shear stiffness of stud shear connections in composite beams", J. Constr. Steel Res., 6(4), 273-284. https://doi.org/10.1016/0143-974X(86)90008-8.
  18. Selden K.L., Fischer E.C. and Varma A.H. (2016), "Experimental investigation of composite beams with shear connections subjected to fire loading", J. Struct. Eng. (ASCE), 142(2), 04015118. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001381.
  19. Shim, C.S., Lee, P.G., Kim, D.W. and Chung, C.H. (2008), "Effects of group arrangement on the ultimate strength of stud shear connection", Proceedings of the 2008 Composite Construction in Steel and Concrete Conference VI, ASCE Conference, Tabernash, CO, USA, July. https://doi.org/10.1061/41142(396)8.
  20. Shim, C.S., Lee, P.G. and Yoon, T.Y. (2004), "Static behavior of large stud shear connectors", Eng. Struct., 26, 1853-1860. https://doi.org/10.1016/j.engstruct.2004.07.011.
  21. Souza, P.T.D., Kataoka, M.N. and El Debs, A.L.H.C. (2017), "Experimental and numerical analysis of the push-out test on shear studs in hollow core slabs", Eng. Struct., 147, 398-409. https://doi.org/10.1016/j.engstruct.2017.05.068.
  22. Viest, I.M. (1956), "Investigation of stud shear connectors for composite concrete and steel T-beams", J. Am. Concr. Inst., 27(8), 875-891. http://dx.doi.org/10.14359/11655.
  23. Wang, J.Q., Xu, Q.Z., Yao, Y.M., Qi, J.N. and Xiu, H.L. (2018), "Static behavior of grouped large headed stud-UHPC shear connectors in composite structures", Compos. Struct., 206, 202-214. https://doi.org/10.1016/j.compstruct.2018.08.038.
  24. Wang, Y.C. (1998), "Deflection of steel-concrete composite beams with partial shear interaction", J. Struct. Eng. (ASCE), 124, 1159-1165. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1159).
  25. Xia, Y., Chen, L., Ma, H.Y. and Su, D. (2019), "Experimental and numerical study on shear studs connecting steel girder and precast concrete deck", Struct. Eng. Mech., 71(4), 433-444. https://doi.org/10.12989/sem.2019.71.4.433.
  26. Xu, C., Sugiura, K., Wu, C. and Su, Q. (2012), "Parametrical static analysis on group studs with typical push-out tests", J. Constr. Steel Res., 72, 84-96. https://doi.org/10.1016/j.jcsr.2011.10.029.
  27. Xu, X., Liu, Y. and He, J. (2014), "Study on mechanical behavior of rubber-sleeved studs for steel and concrete composite structures", Constr. Build. Mater., 53, 533-546. https://doi.org/10.1016/j.conbuildmat.2013.12.011.
  28. Xue, D.Y., Liu, Y.Q., Yu, Z. and He, J. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Constr. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017.
  29. Spremic, M., Pavlovic, M., Markovic, Z., Veljkovic, M. and Budjevac, D. (2018), "FE validation of the equivalent diameter calculation model for grouped headed studs", Steel Compos. Struct., 26(3), 375-386. https://doi.org/10.12989/SCS.2018.26.3.375.