DOI QR코드

DOI QR Code

Pilot study for investigating behavior of recentering frame connection equipped with friction damper

  • Kim, Young Chan (Incheon Disaster Prevention Research Center, Incheon National University) ;
  • Hu, Jong Wan (Incheon Disaster Prevention Research Center, Incheon National University)
  • 투고 : 2020.12.06
  • 심사 : 2022.08.30
  • 발행 : 2022.08.25

초록

This study introduces a novel friction damper as a component of a recentering frame connection, to solve the problem of structural repair costs, caused by stiffness deterioration and brittle fracture of the central brace frame (CBF). The proposed damper consists of shape memory alloy (SMA) bars with pretension applied to them to improve the stability. SMAs reduce the residual displacement by virtue of the properties of the materials themselves; in addition, a pretension can be applied to partially improve their energy dissipation capacity. The damper also consists of a friction device equipped with friction bolts for increased energy dissipation. Therefore, a study was conducted on the effects of the friction device as well as the pretension forces on the friction damper. For performance verification, 12 cases were studied and analyzed using ABAQUS program. In addition, the friction and pretension forces were used as variables in each case, and the results were compared. As a result, when the pretension and friction force are increased, the energy dissipation capacity gradually increases by up to about 94% and the recentering capacity decreases by up to about 55%. Therefore, it has been shown that SMA bars with adequate pretension in combination with bolts with adequate frictional force effectively reduce residual deformation and increase damper capacity. Thus, this study has successfully proposed a novel friction damper with excellent performance in terms of recentering and energy dissipation capacity.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (NRF-2021R1A2B5B02002599).

참고문헌

  1. Hu, J.W., Choi, E.S. and Leon, R.T. (2011), "Design, analysis, and application of innovative composite PR connections between steel beams and CFT columns", Smart Mater. Struct., 20(2), 1-15. https://doi.org/10.1088/0964-1726/20/2/025019.
  2. Hu, J.W. and Leon, R.T. (2011), "Analyses and evaluations for composite-moment frames with SMA PR-CFT connections", Nonlinear Dyn., 65(4), 433-455. https://doi.org/10.1007/s11071-010-9903-3.
  3. DesRoches, R. and Smith, B. (2004), "Shape memory alloys in seismic resistant design and retrofit: a critical review of their potential and limitations", J. Earthq. Eng., 8(3), 1-15. https://doi.org/10.1080/13632460409350495.
  4. Menna, C., Auricchio, F. and Asprone, D. (2015), "Applications of shape memory alloys in structural engineering", 369-403. http://dx.doi.org/10.1016/B978-0-08-099920-3.00013-9.
  5. Ozbulut, O.E., Hurlebaus, S. and DesRoches, R. (2011), "Seismic response control using shape memory alloys: A review", J. Intel. Mater. Syst. Struct., 22(14), 1531-1549. https://doi.org/10.1177%2F1045389X11411220. https://doi.org/10.1177%2F1045389X11411220
  6. Christopoulos, C., Filiatrault, A., Uang, C.M. and Folz, B. (2002), "Posttensioned energy dissipating connections for moment-resisting steel frames", J. Struct. Eng., 128(9), 1111-1120, https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1111).
  7. Christopoulos, C., Tremblay, R., Kim, H.J. and Lacerte, M. (2008), "Self-centering energy dissipative bracing system for the seismic resistance of structures: development and validation", J. Struct. Eng., 134(1), 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2008) 134:1(96).
  8. Hu, J.W. and Leon, R.T. (2010), "Analyses and evaluations for composite-moment frames with SMA PR-CFT connections", Nonlinear Dyn., 65(4), 433-455. https://doi.org/10.1007/s11071-010-9903-3.
  9. Hu, J.W. (2014), "Seismic analysis and evaluation of several recentering braced frame structures. Proceedings of the Institution of Mechanical Engineers, Part C", J. Mech. Eng. Sci., 228(5), 781-798. https://doi.org/10.1177/0954406213490600.
  10. Hu, J.W., Lee, J.H. and Seo, J.W. (2014), "Performance-based optimal design of self-centering friction damping brace systems between recentering capability and energy dissipation", J. Mech. Sci. Technool., 28(8), 3129-3136. https://doi.org/10.1007/s12206-014-0721-2.
  11. Hu, J.W., Noh, M.H. and Ahn, J.H. (2018), "Experimental investigation on the behavior of bracing damper systems by utilizing metallic yielding and recentering material devices", Adv. Mater. Sci. Eng., 2018(7), 1-15. https://doi.org/10.1155/2018/2813058.
  12. Seo, J.W., Hu, J.W. and Kim, K.H. (2017), "Analytical investigation of the cyclic behavior of smart recentering t-stub components with superelastic SMA bolts", Metals. 7(10), 386. https://doi.org/10.3390/met7100386.
  13. Moradi, S., Alam, M.S. and Asgarian, B. (2014), "Incremental dynamic analysis of steel frames equipped with NiTi shape memory alloy braces", Sturct. Des. Tall Spec. Build., 23(18), 1406-1425. https://doi.org/10.1002/tal.1149.
  14. Moradi, S. and Alam, M.S. (2015), "Feasibility study of utilizing superelastic shape memory alloy plates in steel beam-column connections for improved seismic performance", J. Intell. Mater. Syst. Struct., 26(4), 463-475. https://doi.org/10.1177/1045389X14529032.
  15. Speicher, M.S., DesRoches, R. and Leon, R.T. (2011), "Experimental results of a NiTi shape memory alloy (SMA)-based recentering beam-column connection", Eng. Struct., 33(9), 2448-2457. https://doi.org/10.1016/j.engstruct.2011.04.018.
  16. Speicher, M.S., DesRoches, R. and Leon, R.T. (2017), "Investigation of an articulated quadrilateral bracing system utilizing shape memory alloys", Journal of Constructional Steel Research, 130, 65-78. https://doi.org/10.1016/j.jcsr.2016.11.022.
  17. Hedayati, D.F. and Alam, M.S. (2013), "Shape memory alloy wire-based smart natural rubber bearing", Smart Mater. Struct., 22(4), 45013-45030. https://doi.org/10.1088/0964-1726/22/4/045013.
  18. Hedayati, D.F. and Alam, M.S. (2015), "Hysteresis model of shape memory alloy wire-based laminated rubber bearing under compression and unidirectional shear loadings", Smart Mater. Struct., 24(6), 065022-065041. https://doi.org/10.1088/0964-1726/24/6/065022.
  19. Hedayati, D.F., Li, S., Alam, M.S. and Wang, J.Q. (2017), "Effect of constitutive models on the seismic response of an SMA-LRB isolated highway bridge", Eng. Struct., 148, 113-125. https://doi.org/ 10.1016/j.engstruct.2017.06.036.
  20. Hedayati, D.F. and Alam, M.S. (2018), "Smart lead rubber bearings equipped with ferrous shape memory alloy wires for seismically isolating highway bridges", J. Earthq. Eng., 22(6), 1042-1067, https://doi.org/10.1080/13632469.2016.1269692
  21. Seo, J.W. and Hu, J.W. (2016), "Seismic response and performance evaluation of self-centering LRB isolators installed on the CBF building under NF ground motions", Sustainability. 8(2), 109. https://doi.org/10.3390/su8020109.
  22. Zareie, S., Alam, M.S., Seethaler, R.J. and Zabihollah, A. (2019), "Effect of shape memory alloy-magnetorheological fluid-based structural control system on the marine structure using nonlinear time-history analysis", Appl. Ocean Res., 91, 1-9. https://doi.org/10.1016/J.APOR.2019.05.021.
  23. Mirzai, N.M., Attarnejad, R. and Hu, J.W. (2018), "Enhancing the seismic performance of EBFs with vertical shear link using a new self-centering damper", Ingegneria Sismica, 35(4), 57-76. http://ingegneriasismica.org/enhancing-the-seismicperformance-of-ebfs-with-vertical-shear-link-using-a-new-selfcentering-damper/.
  24. Mirzai, N.M., Attarnejad, R. and Hu, J.W. (2020), "Analytical investigation of the behavior of a new smart recentering shear damper under cyclic loading", Intel. Mater. Syst. Struct., 31(4), 550-569, https://doi.org/10.1177/1045389X19888786.
  25. Seo, J.W., Kim, Y.C. and Hu, J.W. (2015), "Pilot study for investigating the cyclic behavior of slit damper systems with recentering shape memory alloy (SMA) bending bars used for seismic restrainers", Appl. Sci., 5(3), 187-208. https://doi.org/10.3390/app5030187.
  26. DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:1(38).
  27. Hu, J.W., Choi, E. and Leon, R.T. (2011), "Design, analysis, and application of innovative composite PR connections between steel beams and CFT columns", Smart Mater. Struct., 20(2), 1-15. https://doi.org/10.1088/0964-1726/20/2/025019.
  28. Song, G., Ma, N. and Li, H. (2006), "Applications of shape memory alloys in civil structures", Eng. Struct., 28(9), 1266-1274. https://doi.org/10.1016/j.engstruct.2005.12.010.
  29. Qiu, C., Gong, Z., Peng, C. and Li, H. (2020), "Seismic vibration control of an innovative self-centering damper using confined SMA core", Smart Struct. Syst., 25(2), 241-254. https://doi.org/10.12989/sss.2020.25.2.241.
  30. Duerig, T.W., Melton, K.N., Stokel, D. and Wayman, C.M. (1990), Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann Elsevier Ltd, Oxford, UK.
  31. Qian, H., Li, H. and Song, G. (2016), "Experimental investigations of building structure with a superelastic shape memory alloy friction damper subject to seismic loads", Smart Mater. Struct., 25, 1-14. https://doi.org/10.1088/0964-1726/25/12/125026.
  32. Chan, R.W. and Albermani, F. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30(4), 1058-1066. https://doi.org/10.1016/j.engstruct.2007.07.005.