DOI QR코드

DOI QR Code

Research on the longitudinal stress distribution in steel box girder with large cantilever

  • HONG, Yu (National Engineering Laboratory for Technology of Geological Disaster Prevention in Land Transportation, Southwest Jiaotong University) ;
  • LI, ShengYu (National Engineering Laboratory for Technology of Geological Disaster Prevention in Land Transportation, Southwest Jiaotong University) ;
  • WU, Yining (Department of Civil Engineering, Southwest Jiaotong University) ;
  • XU, Dailing (Department of Civil Engineering, Southwest Jiaotong University) ;
  • PU, QianHui (Department of Civil Engineering, Southwest Jiaotong University)
  • 투고 : 2021.05.30
  • 심사 : 2022.09.06
  • 발행 : 2022.09.10

초록

There are numerous structural details (Longitudinal beam, web plate, U-ribs and I-ribs) in the top and bottom plates of steel box girders, which have significant influences on the longitudinal stress (normal stress) distribution. Clarifying the influence of these structural details on the normal stress distribution is important. In this paper, the ultra-wide steel box girder with large cantilevers of the Jinhai Bridge in China, which is the widest cable-stayed bridge in the world, has been analyzed. A 1:4.5 scale laboratory model of the steel box girder has been manufactured, and the influence of structural details on the normal stress distribution in the top and bottom plates for four different load cases has been analyzed in detail. Furthermore, a three-dimensional finite element model has been established to further investigate the influence regularity of structural details on the normal stress. The experimental and finite element analysis (FEA) results have shown that different structural details of the top and bottom plates have varying effects on the normal stress distribution. Notably, the U-ribs and I-ribs of the top and bottom plates introduce periodicity to the normal stress distribution. The period of the influence of U-ribs on the normal stress distribution is the sum of the single U-rib width and the U-rib spacing, and that of the influence of I-ribs on the normal stress distribution is equal to the spacing of the I-ribs. Furthermore, the same structural details but located at different positions, will have a different effect on the normal stress distribution.

키워드

과제정보

This work was generously supported by the scientific and technological research and development project of China National Railway Group Co., Ltd (P2019T001, K2018G058), Sichuan Science and Technology Program (2021YJ0054), China-Indonesia Joint Research Center on High-speed Railway Technology (KY201801005) and the Science and Technology Department of Guangxi Zhuang Autonomous (2021AA01007AA).

참고문헌

  1. Abid, S.R. (2020), "Temperature variation in steel beams subjected to thermal loads", Steel Compos. Struct, 34(6), 819-835. http://dx.doi.org/10.12989/scs.2020.34.6.819.
  2. Ansys. 15.0. (2013), Ansys Company. Pennsylvania, USA
  3. Benmohammed, N., Ziane, N., Meftah, S.A. and Ruta, G. (2020), "Distortional effect on global buckling and post -buckling behaviour of steel box beams", Steel Compos. Struct, 35(6), 717-727. http://dx.doi.org/10.12989/scs.2020.35.6.717.
  4. Chang, S.T. (2004), "Shear lag effect in simply supported prestressed concrete box girder", J Bridge Eng, 9(2), 178-184. http://dx.doi.org/10.1061/(asce)1084-0702(2004)9:2(178).
  5. Chen, Y., Dong, J., Xu, T., Xiao, Y., Jiang, R. and Nie, X. (2019), "The shear-lag effect of composite box girder bridges with corrugated steel webs and trusses", Eng. Struct, 18, 617-628. http://dx.doi.org/10.1016/j.engstruct.2018.12.048.
  6. Gara, F., Ranzi, G. and Leoni,G. (2011), "Simplified method of analysis accounting for shear-lag effects in composite bridge decks", J Construct. Steel Res, 67(10), 1684-1697. http://dx.doi.org/10.1016/j.jcsr.2011.04.013.
  7. Jo, E.J., Vu, Q.V. and Kim, S.E. (2020), "Effect of residual stress and geometric imperfection on the strength of steel box girders", Steel Compos Struct, 34(3), 423-440. http://dx.doi.org/10.12989/scs.2020.34.3.423.
  8. Kristek, V., Evans, H.R. and Ahmad, M.K.M. (1990), "A shear lag analysis for composite box girders", J Construct. Steel Res, 16(1), 1-21. http://dx.doi.org/10.1016/0143-974X(90)90002-X.
  9. Luo, D., Zhang Z.W. and Li, B. (2019), "Shear lag effect in steelconcrete composite beam in hogging moment", Steel Compos. Struct., 31(1), 27-41. http://dx.doi.org/10.12989/scs.2019.31.1.027.
  10. Lezgy-Nazargah, M., Vidal, P. and Polit, O. (2019), "A sinus shear deformation model for static analysis of composite steelconcrete beams and twin-girder decks including shear lag and interfacial slip effects", Thin-Walled Struct, 134, 61-70. http://dx.doi.org/10.1016/j.tws.2018.10.001.
  11. Li, C., Li, B., Wei, C. and Zhang, J. (2011), "3-Bar simulationtransfer matrix method for shear lag analysis", Procedia Eng., 12, 21-26. http://dx.doi.org/10.1016/j.proeng.2011.05.005.
  12. Li, S.Y., Hong, Y., Gou, H.Y. and Pu, Q.H. (2021), "An improved method for analyzing shear-lag in thin-walled girders with rectangular ribs", J. Construct. Steel Res, 177, 106427. http://dx.doi.org/10.1016/j.jcsr.2020.106427.
  13. Li, X., Wan, S., Mo, Y.L., Shen, K., Zhou, T. and Nian, Y. (2019), "An improved method for analyzing shear lag in thin-walled box-section beam with arbitrary width of cantilever flange", Thin-Walled Struct, 140, 222-235. http://dx.doi.org/10.1016/j.tws.2019.03.026.
  14. Li, X.Y., Zhang, G., Kodur, V., He, S.H. and Huang, Q. (2021), "Designing method for fire safety of steel box bridge girders", Steel Compos. Struct., 38(6), 657-670. http://dx.doi.org/10.12989/scs.2021.38.6.657.
  15. Li, Y. D., Wu, J., Qiang, B., Zhou, S.T., Liu, W.Q. and Yao, C.R. (2021), "Measurements of residual stresses in a welded orthotropic steel deck by the hole-drilling method considering stress biaxiality", Eng Struct, 230, 111690. http://dx.doi.org/10.1016/j.engstruct.2020.111690.
  16. Lopez-Anido, R. and GangaRao Hota, V.S. (1996), "Warping solution for shear lag in thin-walled orthotropic composite beams", J Eng Mech, 122(5), 449-457. http://dx.doi.org/10.1061/(ASCE)0733-9399(1996)122:5(449).
  17. Luo, Q.Z., Li, Q.S. and Tang, J. (2002), "Shear lag in box girder bridges", J. Bridge Eng, 7(5), 308-313. http://dx.doi.org/10.1061/(ASCE)1084-0702(2002)7:5(308).
  18. Luo, Q.Z., Wu, Y.M., Li, Q.S., Tang, J. and Liu, G.D. (2004), "A finite segment model for shear lag analysis", Eng. Struct., 26(14), 2113-2124. http://dx.doi.org/10.1016/j.engstruct.2004.07.010.
  19. TB 10002 (2005), Code for Design on Steel Structure of Railway Bridge, MRPRC (Ministry of Railways of the People's Republic of China), China Railway Press, Beijing, China.
  20. GB 50017 (2017), Code for Design of Steel Structures, NSPRC (National Standards of the People's Republic of China). China Architecture & Building Press, Beijing, China.
  21. Prokic, A. (2002), "New finite element for analysis of shear lag", Comput. Struct., 80(11), 1011-1024. http://dx.doi.org/10.1016/S0045-7949(02)00036-6.
  22. Song, Q.G. and Scordelis, A.C. (1990), "Formulas for shear-lag effect of T-, I- and box beams", J. Struct. Eng., 116(5), 1306-1318. http://dx.doi.org/10.1061/(ASCE)0733-9445(1990)116:5(1306).
  23. Taherian, A.R. and Evans, H.R. (1997), "The bar simulation method for the calculation of shear lag in multi-cell and continuous box girders", Proceedings of the Institution of Civil Engineers, 2, 881-897. http://dx.doi.org/10.1680/iicep.1978.2818.
  24. Wang, J., Tang, S., Zheng, H., Zhou, C. and Zhu, M. (2020), "Flexural behavior of a 30-meter full-scale simply supported prestressed concrete box girder", Appl. Sci., 10(9), 3076. http://dx.doi.org/10.3390/app10093076.
  25. Wang, X. and Rammerstorfer, F.G. (1996), "Determination of effective breadth and effective width of stiffened plates by finite strip analyses", Thin-Walled Struct, 26(4), 261-286. http://dx.doi.org/10.1016/0263-8231(96)00028-6.
  26. Wei, X., Xiao, L. and Wang, Z.J. (2018), "Full-scale specimen testing and parametric studies on tensile-plate cable-girder anchorages in cable-stayed bridges with steel girders", J. Bridge Eng., 23(4), 04018006. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0001193.
  27. Wang, Q. and Zhang, Z. (2011), "Orthotropic steel cantilever widening method of concrete box girder", Struct. Eng. Int., 21(2), 228-232. https://doi.org/10.2749/101686611X12994961034688.
  28. Yan, W.T., Han, B., Zhu, L., Jiao, Y.Y. and Xie, H.B. (2017), "A fiber beam element model for elastic-plastic analysis of girders with shear lag effects", Steel Compos Struct, 32(5), 657-670. http://dx.doi.org/10.12989/scs.2019.32.5.657.
  29. Zhang, Y.H. (2012), "Improved finite-segment method for analyzing shear lag effect in thin-walled box girders", J. Struct. Eng., 138(10), 1279-1284. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0000552.
  30. Zhang, Y.H. and Lin, L.X. (2014), "Shear lag analysis of thinwalled box girders based on a new generalized displacement", Eng. Struct., 61, 73-83. http://dx.doi.org/10.1016/j.engstruct.2013.12.031.
  31. Zhou, C., Li, L.F. and Wang, J.Q. (2020), "Modified bar simulation method for shear lag analysis of non-prismatic composite box girders with corrugated steel webs", Thin Wall. Struct., 155, 106975. http://dx.doi.org/10.1016/j.tws.2020.106957.
  32. Zhou, S.J. (2011), "Shear lag analysis in prestressed concrete box girders", J. Bridge Eng., 16(4), 500-512. http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000179.
  33. Zhu, L., Nie, J.G., Li, F.X. and Ji, W.Y. (2015), "Simplified analysis method accounting for shear-lag effect of steel concrete composite decks", J. Construct. Steel Res., 115, 62-80. http://dx.doi.org/10.1016/j.jcsr.2015.08.020.
  34. Zhu, L., Wang, J., Zhao, G., Huo, X. and Li, X. (2020), "Experimental and numerical study on large-curvature curved composite box girder under hogging moment", Steel Compos. Struct., 37(2), 117-136. http://dx.doi.org/10.12989/scs.2020.37.2.117.
  35. Zhang, J.Q, Han, B., Xie, H.B., Yan, W.T., Li, W.W. and Yu, J.P. (2021), "Analysis of shear lag effect in the negative moment region of steel-concrete composite beams under fatigue load", Steel Compos. Struct., 39(4), 435-451. http://dx.doi.org/10.12989/scs.2021.39.4.435.