DOI QR코드

DOI QR Code

Stochastic buckling quantification of porous functionally graded cylindrical shells

  • Trinh, Minh-Chien (Department of Civil and Environmental Engineering, Sejong University) ;
  • Kim, Seung-Eock (Department of Civil and Environmental Engineering, Sejong University)
  • 투고 : 2020.10.23
  • 심사 : 2022.08.30
  • 발행 : 2022.09.10

초록

Most of the experimental, theoretical, and numerical studies on the stability of functionally graded composites are deterministic, while there are full of complex interactions of variables with an inherently probabilistic nature, this paper presents a non-intrusive framework to investigate the stochastic nonlinear buckling behaviors of porous functionally graded cylindrical shells exposed to inevitable source-uncertainties. Euler-Lagrange equations are theoretically derived based on the three variable refined shear deformation theory. Closed-form solutions for the shell buckling loads are achieved by solving the deterministic eigenvalue problems. The analytical results are verified with numerical results obtained from finite element analyses that are conducted in the commercial software ABAQUS. The non-intrusive framework is completed by integrating the Monte Carlo simulation with the verified closed-form solutions. The convergence studies are performed to determine the effective pseudorandom draws of the simulation. The accuracy and efficiency of the framework are verified with statistical results that are obtained from the first and second-order perturbation techniques. Eleven cases of individual and compound uncertainties are investigated. Sensitivity analyses are conducted to figure out the five cases that have profound perturbative effects on the shell buckling loads. Complete probability distributions of the first three critical buckling loads are completely presented for each profound uncertainty case. The effects of the shell thickness, volume fraction index, and stochasticity degree on the shell buckling load under compound uncertainties are studied. There is a high probability that the shell has non-unique buckling modes in stochastic environments, which should be known for reliable analysis and design of engineering structures.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2021R1A2B5B01002577).

참고문헌

  1. Akbas, S.D. (2017), "Post-buckling responses of functionally graded beams with porosities", Steel Comp. Struct., 24(5), 579-589. https://doi.org/10.12989/scs.2017.24.5.579.
  2. Chen, D., Yang, J. and Kitipornchai, S. (2019), "Buckling and bending analyses of a novel functionally graded porous plate using Chebyshev-Ritz method", Arch. Civ. Mech. Eng., 19(1), 157-170. https://doi.org/10.1016/j.acme.2018.09.004.
  3. Chu, L., Li, Y. and Dui, G. (2020), "Nonlinear analysis of functionally graded flexoelectric nanoscale energy harvesters", Int. J. Mech. Sci., 167, 105282. https://doi.org/10.1016/j.ijmecsci.2019.105282.
  4. Do, Q.C., Vu, D.Q., Vu, T.T.A. and Nguyen, D.D. (2019), "Nonlinear buckling and post-buckling of functionally graded CNTs reinforced composite truncated conical shells subjected to axial load", Steel Comp. Struct., 31(3), 243-259. https://doi.org/10.12989/scs.2019.31.3.243.
  5. Gao, Y., Xiao, W. and Zhu, H. (2020), "Nonlinear bending of functionally graded porous nanobeam subjected to multiple physical load based on nonlocal strain gradient theory", Steel Comp. Struct., 31(5), 469-488. https://doi.org/10.12989/scs.2019.31.5.469.
  6. Garcia-Macias, E., Castro-Triguero, R., Friswell, M.I., Adhikari, S. and Saez, A. (2016), "Metamodel-based approach for stochastic free vibration analysis of functionally graded carbon nanotube reinforced plates", Compos. Struct., 152, 183-198. https://doi.org/10.1016/j.compstruct.2016.05.019.
  7. Gilli, L., Lathouwers, D., Kloosterman, J.L. and Hagen, T.H.J.J. Van Der (2013), "Applying second-order adjoint perturbation theory to time-dependent problems", Ann. Nucl. Energy, 53, 9-18. https://doi.org/10.1016/j.anucene.2012.10.003.
  8. Karsh, P.K., Mukhopadhyay, T. and Dey, S. (2019), "Stochastic low-velocity impact on functionally graded plates : Probabilistic and non-probabilistic uncertainty quantification", Compos. Part B Eng., 159, 461-480. https://doi.org/10.1016/j.compositesb.2018.09.066.
  9. Kiran, M.C. and Kattimani, S.C. (2018), "Assessment of porosity influence on vibration and static behavior of functionally graded magneto-electro-elastic plate: A finite element study", Eur. J. Mech. / A Solids, 71, 258-277. https://doi.org/10.1016/j.euromechsol.2018.04.006.
  10. Koizumi, M. (1997), "FGM activities in Japan", Compos. Part B Eng., 28(1-2), 1-4. https://doi.org/10.1016/S1359-8368(96)00016-9.
  11. Li, H. and Du, Y. (2019), "Free vibration analysis of uniform and stepped functionally graded circular cylindrical shells", Steel Comp. Struct., 33(2), 163-180. https://doi.org/10.12989/scs.2019.33.2.163.
  12. Li, K., Gao, W., Wu, D., Song, C. and Chen, T. (2018), "Spectral stochastic isogeometric analysis of linear elasticity", Comput. Methods Appl. Mech. Eng., 332, 157-190. https://doi.org/10.1016/j.cma.2017.12.012.
  13. Luo, Y., Zhan, J., Xing, J. and Kang, Z. (2019), "Non-probabilistic uncertainty quantification and response analysis of structures with a bounded field model", Comput. Methods Appl. Mech. Eng., 347, 663-678. https://doi.org/10.1016/j.cma.2018.12.043.
  14. Moita, J.S., Araujo, A.L., Correia, V.F., Mota Soares, C.M. and Herskovits, J. (2018), "Buckling and nonlinear response of functionally graded plates under thermo-mechanical loading", Compos. Struct., 202, 719-730. https://doi.org/10.1016/j.compstruct.2018.03.082.
  15. Mojahedin, A., Jabbari, M., Khorshidvand, A.R. and Eslami, M.R. (2016), "Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory", Thin-Walled Struct., 99, 83-90. https://doi.org/10.1016/j.tws.2015.11.008.
  16. Nam, V.H., Trung, N.T. and Hoa, L.K. (2019), "Buckling and postbuckling of porous cylindrical shells with functionally graded composite coating under torsion in thermal environment", Thin-Walled Struct., 144, 106253. https://doi.org/10.1016/j.tws.2019.106253.
  17. Naskar, S., Mukhopadhyay, T., Sriramula, S. and Adhikari, S. (2017), "Stochastic natural frequency analysis of damaged thinwalled laminated composite beams with uncertainty in micromechanical properties", Compos. Struct., 160, 312-334. https://doi.org/10.1016/j.compstruct.2016.10.035.
  18. Nguyen, T.M.S., Trinh, M.C. and Kim, S.E. (2021), "Uncertainty quantification of ultimate compressive strength of CCFST columns using hybrid machine learning model", Eng. Comput. https://doi.org/10.1007/s00366-021-01339-1.
  19. Ni, P., Li, J., Hao, H., Xia, Y. and Du, X. (2019), "Stochastic dynamic analysis of marine risers considering fluid-structure interaction and system uncertainties", Eng. Struct., 198, 109507. https://doi.org/10.1016/j.engstruct.2019.109507.
  20. Noor, A.K. and Balch, C.D. (1984), "Hybrid Perturbation / Bubnov-Galerkin Technique for Nonlinear Thermal Analysis", AIAA J., 22(2), 287-294. https://doi.org/10.2514/3.8381.
  21. Pouresmaeeli, S., Fazelzadeh, S.A., Ghavanloo, E. and Marzocca, P. (2018), "Uncertainty propagation in vibrational characteristics of functionally graded carbon nanotube-reinforced composite shell panels", Int. J. Mech. Sci., 149, 549-558. https://doi.org/10.1016/j.ijmecsci.2017.05.049.
  22. Quan, T.Q., Cuong, N.H. and Duc, N.D. (2019), "Nonlinear buckling and post-buckling of eccentrically oblique stiffened sandwich functionally graded double curved shallow shells", Aerosp. Sci. Technol., 90, 169-180. https://doi.org/10.1016/j.ast.2019.04.037.
  23. Rice, J.A. (2006), Mathematical Statistics and Data Analysis, Duxbury Press, Belmont, CA, USA.
  24. Singh, S., Zafar, S., Talha, M., Gao, W. and Hui, D. (2018), "State of the art of composite structures in non-deterministic framewo : A review", Thin-Walled Struct., 132, 700-716. https://doi.org/10.1016/j.tws.2018.09.016.
  25. Trabelsi, S., Frikha, A., Zghal, S. and Dammak, F. (2018), "Thermal post-buckling analysis of functionally graded material structures using a modified FSDT", Int. J. Mech. Sci., 144, 74-89. https://doi.org/10.1016/j.ijmecsci.2018.05.033.
  26. Trabelsi, S., Frikha, A., Zghal, S. and Dammak, F. (2019), "A modified FSDT-based four nodes finite shell element for thermal buckling analysis of functionally graded plates and cylindrical shells", Eng. Struct., 178, 444-459. https://doi.org/10.1016/j.engstruct.2018.10.047.
  27. Trinh, M.C. and Jun, H. (2021a), "Stochastic vibration analysis of functionally graded beams using artificial neural networks", Struct. Eng. Mech. 78, 529-543. https://doi.org/10.12989/sem.2021.78.5.529.
  28. Trinh, M.C. and Jun, H. (2021b), "Stochastic bending and buckling analysis of laminated composite plates using Latin hypercube sampling", Eng. Comput. https://doi.org/10.1007/s00366-021-01544-y.
  29. Trinh, M.C. and Kim, S.E. (2018), "Nonlinear thermomechanical behaviors of thin functionally graded sandwich shells with double curvature". Compos. Struct., 195, 335-348. https://doi.org/10.1016/j.compstruct.2018.04.067.
  30. Trinh, M.C. and Kim, S.E. (2019a), "Nonlinear stability of moderately thick functionally graded sandwich shells with double curvature in thermal environment", Aerosp. Sci. Technol., 84, 672-685. https://doi.org/10.1016/j.ast.2018.09.018.
  31. Trinh, M.C. and Kim, S.E. (2019b), "A three variable refined shear deformation theory for porous functionally graded doubly curved shell analysis", Aerosp. Sci. Technol., 94, 105356. https://doi.org/10.1016/j.ast.2019.105356.
  32. Trinh, M.C. and Kim, S.E. (2021), "Deterministic and stochastic thermomechanical nonlinear dynamic responses of functionally graded sandwich plates", Compos. Struct. 274, 114359. https://doi.org/10.1016/j.compstruct.2021.114359.
  33. Trinh, M.C., Nguyen, D.D. and Kim, S.E. (2019), "Effects of porosity and thermomechanical loading on free vibration and nonlinear dynamic response of functionally graded sandwich shells with double curvature", Aerosp. Sci. Technol., 87, 119-132. https://doi.org/10.1016/j.ast.2019.02.010.
  34. Trinh, M.C., Mukhopadhyay, T. and Kim, S.E. (2020), "A semianalytical stochastic buckling quantification of porous functionally graded plates", Aerosp. Sci. Technol., 105, 105928. https://doi.org/10.1016/j.ast.2020.105928.
  35. Trinh, M.C., Nguyen, S.N., Jun, H. and Nguyen-Thoi, T. (2021), "Stochastic buckling quantification of laminated composite plates using cell-based smoothed finite elements", Thin-Walled Struct. 163, 107674. https://doi.org/10.1016/j.tws.2021.107674.
  36. Vishwanathan, A. and Vio, G.A. (2019), "Numerical and experimental assessment of random matrix theory to quantify uncertainty in aerospace structures", Mech. Syst. Signal Process., 118, 408-422. https://doi.org/10.1016/j.ymssp.2018.09.006.
  37. Wang, W., Chen, G., Yang, D. and Kang, Z. (2019), "Stochastic isogeometric analysis method for plate structures with random uncertainty", Comput. Aided Geom. Des., 74, 101772. https://doi.org/10.1016/j.cagd.2019.101772.
  38. Xu, K., Yuan, Y. and Li, M. (2019), "Buckling behavior of functionally graded porous plates integrated with laminated composite faces sheets", Steel Comp. Struct., 32(5), 633-642. https://doi.org/10.12989/scs.2019.32.5.633.
  39. Yang, H.S., Dong, C.Y., Qin, X.C. and Wu, Y.H. (2020), "Vibration and buckling analyses of FGM plates with multiple internal defects using XIGA-PHT and FCM under thermal and mechanical loads", Appl. Math. Model., 78, 433-481. https://doi.org/10.1016/j.apm.2019.10.011.
  40. Zenkour, A.M. and Aljadani, M.H. (2019), "Porosity effect on thermal buckling behavior of actuated functionally graded piezoelectric nanoplates", Eur. J. Mech. / A Solids, 78, 103835. https://doi.org/10.1016/j.euromechsol.2019.103835.
  41. Zhang, D.G. (2015), "Nonlinear static analysis of FGM infinite cylindrical shallow shells based on physical neutral surface and high order shear deformation theory", Appl. Math. Model., 39(5-6), 1587-1596. https://doi.org/10.1016/j.apm.2014.09.023.
  42. Zhao, J., Xie, F., Wang, A., Shuai, C., Tang, J. and Wang, Q. (2019), "A unified solution for the vibration analysis of functionally graded porous (FGP) shallow shells with general boundary conditions", Compos. Part B Eng., 156, 406-424. https://doi.org/10.1016/j.compositesb.2018.08.115.
  43. Zhou, Y. and Zhang, X. (2019), "Natural frequency analysis of functionally graded material beams with axially varying stochastic properties", Appl. Math. Model., 67, 85-100. https://doi.org/10.1016/j.apm.2018.10.011.
  44. Zhou, C., Zhang, Z., Zhang, J. and Tahouneh, V. (2020), "Vibration analysis of FG porous rectangular plates reinforced by graphene platelets", Steel Comp. Struct., 34(2), 215-226. https://doi.org/10.12989/scs.2020.34.2.215.