DOI QR코드

DOI QR Code

Study on the progressive collapse resistance of CP-FBSP connections in L-CFST frame structure

  • Xiong, Qingqing (Key Laboratory of Roads and Railway Engineering Safety Control (Shijiazhuang Tiedao University), Ministry of Education) ;
  • Wu, Wenbo (School of Civil Engineering, Shijiazhuang Tiedao University) ;
  • Zhang, Wang (Key Laboratory of Roads and Railway Engineering Safety Control (Shijiazhuang Tiedao University), Ministry of Education) ;
  • Chen, Zhihua (Department of Civil Engineering, Tianjin University) ;
  • Liu, Hongbo (Department of Civil Engineering, Tianjin University) ;
  • Su, Tiancheng (Dali Construction Group Corporation Limited)
  • 투고 : 2020.11.02
  • 심사 : 2022.07.29
  • 발행 : 2022.08.10

초록

When the vertical load-bearing members in high-rise structures fail locally, the beam-column joints play an important role in the redistribution of the internal forces. In this paper, a static laboratory test of three full-scale flush flange beam-reinforced connections with side and cover plates (CP-FBSP connection) with double half-span steel beams and single L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) was conducted. The influence of the side plate width and cover plate thickness on the progressive collapse resistance of the substructure was thoroughly analyzed. The failure mode, vertical force-displacement curves, strain variation, reaction force of the pin support and development of internal force in the section with the assumed plastic hinge were discussed. Then, through the verified finite element model, the corresponding analyses of the thickness and length of the side plates, the connecting length between the steel beam flange and cover plate, and the vertical-force eccentricity were carried out. The results show that the failure of all the specimens occurred through the cracking of the beam flange or the cover plate, and the beam chord rotations measured by the test were all greater than 0.085 rad. Increasing the length, thickness and width of the side plates slightly reduced the progressive collapse resistance of the substructures. The vertical-force eccentricity along the beam length reduced the progressive collapse resistance of the substructure. An increase in the connecting length between the beam flange and cover plate can significantly improve the progressive collapse resistance of substructures.

키워드

과제정보

This work was sponsored by the National Natural Science Foundation of China (grant No. 52008270), the Youth Program of the Natural Science Foundation of Hebei Province, China (grant No. E2020210003), the Key Research and Development Program of Hebei Province, China (22375409D) and the Project of the Science and Technology Research Foundation of Hebei Colleges and Universities, China (grant Nos. ZD2022040 and QN2020409).

참고문헌

  1. Al-Rifaie, A., Jones, S.W., Wang, Q.Y. and Guan, Z.W. (2018), "Experimental and numerical study on lateral impact response of concrete filled steel tube columns with end plate connections", Int. J. Impact Eng., 121, 20-34. https://doi.org/10.1016/j.ijimpeng.2018.07.003
  2. Alrubaidi, M., Elsanadedy, H., Abbas, H., Almusallam, T. and AlSalloum, Y. (2020), "Investigation of different steel intermediate moment frame connections under column-loss scenario", ThinWall. Struct., 154, 106875. https://doi.org/10.1016/j.tws.2020.106875
  3. Bao, Y.B. and Wierzbicki, T. (2004), "On fracture locus in the equivalent strain and stress triaxiality space", Int. J. Mech. Sci., 46(1), 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006.
  4. Demonceau, J.F. and Jaspart, J.P. (2010), "Experimental test simulating a column loss in a composite frame", Adv. Steel Construct., 6(3), 891-913. https://doi.org/10.18057/IJASC.2010.6.3.6.
  5. DOD UFC 4-023-03 (2009), Design of Buildings to Resist Progressive Collapse, US Department of Defense, Washington, DC.
  6. GB/T228.1 (2010), Metallic Materials-Tensile Testing- Part I: Method of Test at Room Temperature.
  7. Guo, L., Gao, S., Wang, Y. and Zhang, S. (2014), "Tests of rigid composite joints subjected to bending moment combined with tension", J. Construct. Steel Res., 95, 44-55. https://doi.org/10.1016/j.jcsr.2013.10.006.
  8. Guo, L.H., Gao, S., Fu, F. and Wang, Y.Y. (2013), "Experimental study and numerical analysis of progressive collapse resistance of composite frames", J. Construct. Steel Res., 89, 236-251. https://doi.org/10.1016/j.jcsr.2013.07.006.
  9. Guo, L.H., Gao, S., Mu, C.M. (2020), "Behavior of MCFST column-steel beam connection with side plates in the scenario of column loss", J. Construct. Steel Res., 171, 106150. https://doi.org/10.1016/j.jcsr.2020.106150.
  10. Han, L.H., Yao, G.H. and Tao, Z. (2007), "Performance of concrete-filled thin-walled steel tubes under pure torsion", ThinWall. Struct., 45(1), 24-36. https://doi.org/10.1016/j.tws.2007.01.008.
  11. Jonathan, M.W. and Jeffrey, W.B. (2014), "Integrity of steel single plate shear connections subjected to simulated column removal", J. Struct. Eng., 140(5), 04013114. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000935.
  12. Kang, S.B., Tan, K.H. and Liu, H.Y. (2017), "Effect of boundary conditions on the behaviour of composite frames against progressive collapse", J. Construct. Steel Res., 138, 150-167. https://doi.org/10.1016/j.jcsr.2017.07.005.
  13. Khaloo, A. and Omidi, H. (2018), "Evaluation of vierendeel peripheral frame as supporting structural element for prevention of progressive collapse", Steel Compos. Struct., 26(5), 549-556. https://doi.org/10.12989/scs.2018.26.5.549.
  14. Khandelwal, K. and El-Tawil, S. (2010), "Collapse behavior of steel special moment resisting frame connections", J. Struct. Eng., 133(5), 646-655. https://doi.org/10.1061/(ASCE)0733- 9445(2007)133:5(646).
  15. Kim, J. and Park, J. (2008), "Design of steel moment frames considering progressive collapse", Steel Compos. Struct., 8(1), 85-98. https://doi.org/10.12989/scs.2008.8.1.085
  16. Xiong, Q., Chen, Z., Kang, J., Zhou, T. and Zhang, W. (2017), "Experimental and finite element study on seismic performance of the LCFST-D columns", J. Construct. Steel Res., 137, 119-134. https://doi.org/10.1016/j.jcsr.2017.06.002.
  17. Xiong, Q., Zhang, W., Chen, Z., Du, Y. and Zhou, T. (2019), "Experimental study of the shear capacity of steel Beam-to-LCFST column connections", Int. J. Steel Struct., 19(3), 704-718. https://doi.org/10.1007/s13296-018-0156-1.
  18. Zhang, W., Chen, Z.H. and Xiong, Q.Q. (2018a), "Performance of L-shaped columns comprising concrete-filled steel tubes under axial compression", J. Construct. Steel Res., 145, 573-590. https://doi.org/10.1016/j.jcsr.2018.03.007.
  19. Zhang, W., Chen, Z.H., Xiong, Q., Zhou, T., Rong, X. and Du, Y. (2018), "Experimental seismic behaviour of L-CFST column to H-beam connections", Steel Compos. Struct., 26(6), 793-808. https://doi.org/10.12989/scs.2018.26.6.793.
  20. Zhang, W., Jia, S., Xiong, Q., Chen, Z., Liu, H., Su, T. and Du, Q. (2021), "Investigation of side plate connections in an S-CFST column frame under a column-loss scenario", Structures, 32, 1302-1319. https://doi.org/10.1016/j.istruc.2021.03.039.
  21. Zhang, W., Xiong, Q., Chen, Z. and Li, R. (2021), "Analysis of a more ductile connection between steel beams and concretefilled tube columns", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 1-17. https://doi.org/10.1680/jstbu.20.00128.
  22. Zhou, T., Xu, M.Y. and Chen, Z.H. (2016), "Eccentric loading behavior of L-shaped columns composed of concrete-filled steel tubes", Adv. Steel Construct., 12(3), 227-244. https://doi.org/10.18057/IJASC.2016.12.3.2.