전면 유기발광 다이오드 기능층 캐핑레이어 적용에 따른 효율상승에 관한 연구

A Study on the Efficiency Effects of Capping Layer on the Top Emission Organic Light Emitting Diode

  • 이동운 (가천대학교 전자공학과) ;
  • 조의식 (가천대학교 전자공학과) ;
  • 전용민 (가천대학교 의공학과) ;
  • 권상직 (가천대학교 전자공학과)
  • Lee, DongWoon (Department of Electronics Engineering, Gachon University) ;
  • Cho, Eou Sik (Department of Electronics Engineering, Gachon University) ;
  • Jeon, Yongmin (Department of Biomedical Engineering, Gachon University) ;
  • Kwon, Sang Jik (Department of Electronics Engineering, Gachon University)
  • 투고 : 2022.09.15
  • 심사 : 2022.09.20
  • 발행 : 2022.09.30

초록

Top emission organic light-emitting diode (TEOLED) is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device (BEOLED). Unlike BEOLED, TEOLED contain semitransparent metal cathode and capping layer. Because there are many characteristics to consider just simple thickness change, optimizing organic thickness of TEOLED for microcavity is difficult. So, in this study, we optimized Device capping layer at unoptimized micro-cavity structure TEOLED device. And we compare only capping layer with unoptimized microcavity structure can overcome optimized micro-cavity structure device. We used previous our optimized micro-cavity structure to compare each other. As a result, it has been found that the efficiency can be obtained almost the same or higher only capping layer, which is stacked on top of the device and controls only the thickness and refractive index, without complicated structural calculations. This means that higher efficiencies can be obtained more easily in laboratories with limited organic materials or when optimizing new structures etc.

키워드

과제정보

본 성과는 2022년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원(KIAT)의 지원을 받아 수행된 연구임(No. P001245, 2022년 산업혁신인재성장지원사업). 본 성과는 또한 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. NRF-2022R1A2C1003076).

참고문헌

  1. Sang Jik Kwon et al, "A Study on the Effects of Micro Cavity on the HTL Thicknesses on the Top Emission Organic Light Emitting Diode" Journal of the semiconductor & display technology v.21 no.1, pp. 91-94(2022).
  2. Kwan-Do Kim, "Fabrication of Organic Thin Film for Flexible OLED Passivation and Its Characterization," Journal of the semiconductor & display technology. vol.19 no.1, pp. 93-96 (2020).
  3. Lee, Jae-Hyun and Lee, "Efficient Green Phosphorescent OLEDs with Hexaazatrinaphthylene Derivatives as a Hole Injection Layer" Applied chemistry for engineering v.26 no.6, pp.725-729 (2015) https://doi.org/10.14478/ACE.2015.1108
  4. Jang, Ji Geun, Ji, Hyun Jin, Kim, Hyun, Kim, Jae Min. "High Efficiency Blue Organic Light-Emitting Diode with Three Organic Layer Structure" Journal of the semiconductor & display technology v.11 no.3, pp.33-37 (2012)
  5. Eunhye Kim, Jin Chung, Jaeho Lee, Hyunsu Cho, Nam Sung Cho, Seunghyup Yoo, "A systematic approach to reducing angular color shift in cavity-based organic light-emitting diodes", Organic Electronics, Volume 48, pp. 348-356 (2017). https://doi.org/10.1016/j.orgel.2017.06.030
  6. Seong Keun Kim, Raju Lampande & Jang Hyuk Kwon "Technical status of top-emission organic light-emitting diodes", Journal of Information Display, 22:3, pp. 115-126 (2021). https://doi.org/10.1080/15980316.2021.1876173
  7. Kwon Jeong Hyun et al., "Improvement of Out-coupling Efficiency of Organic Light Emitting Device by Ion-beam Plasma-treated Plastic Substrate", Journal of Information Display v.21 no.2, pp.7- 10 (2022).
  8. Jeong, Eun Gyo, "Design of Zero-Stress Encapsulation for Mechanical Stability of Flexible OLED Displays". Journal of the Semiconductor & Display Technology v.21 no.2, pp.7- 10(2022).
  9. Chien-Jung Chiang, Steve Bull, Chris Winscom, Andy Monkman, "A nano-indentation study of the reduced elastic modulus of Alq3 and NPB thin-film used in OLED devices", Organic Electronics, Volume 11, Issue 3, pp. 450-455 (2010). https://doi.org/10.1016/j.orgel.2009.11.026