DOI QR코드

DOI QR Code

A baseline free method for locating imperfect bolted joints

  • 투고 : 2022.02.15
  • 심사 : 2022.07.30
  • 발행 : 2022.09.25

초록

This paper studies detecting and locating loose bolts using nonlinear guided waves. The 3D Finite Element (FE) simulation is used for the prediction of guided waves' interactions with loose bolted joints. The numerical results are verified by experimentally obtained data. The study considers bolted joints consisting of two bolts. It is shown that the guided waves' interaction with surfaces of a loose bolted joint generates Contact Acoustic Nonlinearity (CAN). The study uses CAN for detecting and locating loose bolts. The processed experimentally obtained data show that the CAN is able to successfully detect and locate loose bolted joints. A 3D FE simulation scheme is developed and validated by experimentally obtained data. It is shown that FE can predict the propagation of guided waves in loose bolts and is also able to detect and locate them. Several numerical case studies with various bolt sizes are created and studied using the validated 3D FE simulation approach. It is shown that the FE simulation modeling approach and the signal processing scheme used in the current study are able to detect and locate the loose bolts in imperfect bolted joints. The outcomes of this research can provide better insights into understanding the interaction of guided waves with loose bolts. The results can also enhance the maintenance and repair of imperfect joints using the nonlinear guided waves technique.

키워드

과제정보

This project was partially funded by the Australian University and Kuwait Foundation for the Advancement of Sciences (KFAS), under project codes RC 2018-19-SOE-CE-PR04, PR19-15EC-09, and CR20-13EV-01.

참고문헌

  1. Amerini, F. and Meo, M. (2011), "Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methods", J. Struct. Health Monitor., 10, 659-672. https://doi.org/10.1177/1475921710395810
  2. An, Y.K. and Sohn, H. (2010), "Instantaneous crack detection under varying temperature and static loading conditions", J. Struct. Health Monitor., 25(7), 730-741. https://doi.org/10.1002/stc.394
  3. ASTM Standard A307-07 (2017), Standard specification for carbon steel bolts, studs, and threaded rod 60,000 psi tensile strength, American Society for Testing and Materials, West Conshohocken, PA, USA. https://doi.org/10.1520/A0307-07
  4. Biwa, S., Hiraiwa, S. and Matsumoto, E. (2006), "Experimental and theoretical study of harmonic generation at contacting interface", Ultrasonics, 44, e1319-e1322. https://doi.org/10.1016/j.ultras.2006.05.010
  5. Caccese, V., Mewer, R. and Vel, S.S. (2004), "Detection of bolt load loss in hybrid composite/metal bolted connections", Eng. Struct., 26, 895-906. https://doi.org/10.1016/j.engstruct.2004.02.008
  6. Fromme, P. and Sayir, M.B. (2002), "Detection of cracks at rivet holes using guided wave", J. Ultrasonics, 40(1-8), 199-203. https://doi.org/10.1016/S0041-624X(02)00137-3
  7. Kumar, A., Torbert, C.J., Jones, J.W. and Pollock, T.M. (2009), "Nonlinear ultrasonics for in situ damage detection during high frequency fatigue", J. Appl. Phys., 106, 1-9. https://doi.org/ 10.1063/1.3169520
  8. Lee, T.H. and Jhang, K.Y. (2009), "Experimental investigation of nonlinear acoustic effect at crack", NDT & E Int., 42, 757-764. https://doi.org/10.7779/JKSNT.2012.32.4.355
  9. Lowe, M. and Pavlakovic, B. (2013), DISPERSE User's Manual Version 2.0.20a; Non-Destructive Testing Laboratory, Imperial College London, UK.
  10. Ng, C.-T. (2014), "On the selection of advanced signal processing techniques for guided wave damage identification using a statistical approach", Eng. Struct., 67, 50-60. https://doi.org/10.1016/j.engstruct.2014.02.019
  11. Pruell, C., Kim, J-Y., Qu, J. and Jacobs, LJ. (2007), "Evaluation of plasticity driven material damage using lamb waves", J. Appl. Phys. Lett., 91, 231911. https://doi.org/10.3390/app10155124
  12. Richardson, J.M. (1979), "Harmonic generation at an unbonded interface-I. Planar interface between semiinfinite elastic media", Int. J. Eng. Sci., 17, 73-85. https://doi.org/10.1016/0020-7225(79)90008-9
  13. Soleimanpour, R. and Ng, C.T. (2017), "Locating delaminations in laminated composite beams using nonlinear guided waves", Eng. Struct., 131, 207-219. https://doi.org/10.1016/j.engstruct.2016.11.010
  14. Soleimanpour, R. and Ng, C.-T. (2021), "Scattering analysis of nonlinear Lamb waves at delaminations in composite laminates", J. Vib. Control, 28(11-12), 1311-1323. https://doi.org/10.1177/1077546321990145
  15. Soleimanpour, R. and Soleimani, S.M. (2022), "Scattering analysis of linear and nonlinear symmetric Lamb wave at cracks in plates", Nondestr. Test. Eval., 37(4), 439-463. https://doi.org/10.1080/10589759.2022.2030330
  16. Soleimanpour, R., Ng, C.-T. and Wang, C.H. (2017), "Higher harmonic generation of guided waves at delaminations in laminated composite beams", Struct. Health Monitor., 16, 400-417. https://doi.org/10.1177/1475921716673021
  17. Solodov, I.Y., Krohn, N. and Busse, G. (2002), "CAN: an example of nonclassical acoustic nonlinearity in solids", Ultrasonics, 40, 621-625. https://doi.org/10.1016/s0041-624x(02)00186-5
  18. Wang, F. and Song, G. (2020), "Monitoring of multi-bolt connection looseness using a novel vibro-acoustic method", Nonlinear Dyn., 100, 243-254. https://doi.org/10.1007/s11071-020-05508-7
  19. Wang, Y., Zhu, X., Hao, H. and Ou, J. (2009), "Guided wave propagation and spectral element method for debonding damage assessment in RC structures", J. Sound Vib., 324, 751-772. https://doi.org/10.1016/j.jsv.2009.02.028
  20. Wang, T., Song, G. and Wang, Z. (2013), "Proof-of-concept study of monitoring bolt connection status using a piezoelectric based active sensing method", Smart Mater. Struct., 22, 087001. https://doi.org/10.1088/0964-1726/22/8/087001
  21. Wang, T., Liu, S. and Shao, J. (2016), "Health monitoring of bolted joints using the time reversal method and piezoelectric transducers", Smart Mater. Struct., 25, 025010. https://doi.org/10.1088/0964-1726/25/2/025010
  22. Wang, F., Ho, S.C.M. and Song, G. (2019), "Modeling and analysis of an impact-acoustic method for bolt looseness identification", Mech. Syst. Signal Process., 133, 106249. https://doi.org/10.1016/j.ymssp.2019.106249
  23. Yang, Y., Ng, C-T. and Kotousov, A. (2019), "Bolted joint integrity monitoring with second harmonic generated by guided waves", Struct. Health Monitor., 18(1), 193-204. https://doi.org/10.1177/1475921718814399
  24. Yelve, N.P., Mitra, M. and Mujumdar, P.M. (2017), "Detection of delamination in composite laminates using Lamb wave based nonlinear method", Compos. Struct., 159, 257-266. https://doi.org/10.1016/j.compstruct.2016.09.073
  25. Yu, L. and Giurgiutiu, V. (2005), "Advanced signal processing for enhanced damage detection with piezoelectric wafer active sensors", Smart Struct. Syst., Int. J., 1(2), 185-215. https://doi.org/10.12989/sss.2005.1.2.185
  26. Zhang, Z., Liu, M., Su, Z. and Xiao, Y. (2016), "Quantitative evaluation of residual torque of a loose bolt based on wave energy dissipation and vibro-acoustic modulation, A comparative study", J. Sound Vibr., 383, 156-170. https://doi.org/10.1016/j.jsv.2016.07.001
  27. Zhang, M., Shen, Y., Xiao, L. and Qu, W. (2017a), "Application of subharmonic resonance for the detection of bolted joint looseness", J. Nonlinear Dyn., 88, 1643-1653. https://doi.org/doi.org/10.1007/s11071-017-3336-1
  28. Zhang, Z., Xu, H., Liao, Y., Su, Z. and Xiao, Y. (2017b), "Vibro-acoustic modulation (VAM)-inspired structural integrity monitoring and its applications to bolted composite joints", Compos. Struct., 176, 505- 515. https://doi.org/10.1016/j.compstruct.2017.05.043
  29. Zhao, N., Huo, L. and Song, G. (2020), "A nonlinear ultrasonic method for real-time bolt looseness monitoring using pzt transducer-enabled vibro-acoustic modulation", J. Intell. Mater. Syst. Struct., 31(3), 364-376. https://doi.org/10.1177/1045389X19891534