DOI QR코드

DOI QR Code

Different strengthening designs and material properties on bending behavior of externally reinforced concrete slab

  • Najafi, Saeed (Department of Earthquake Engineering, Tarbiat Modares University) ;
  • Borzoo, Shahin (Lifeline Earthquake Engineering Department, International Institute of Earthquake Engineering and Seismology)
  • Received : 2022.04.23
  • Accepted : 2022.09.16
  • Published : 2022.09.25

Abstract

This study investigates the bending behavior of a composite concrete slab roof with different methods of externally strengthing using steel plates and carbon fiber reinforced polymer (CFRP) strips. First, the concrete slab model which was reinforced with CFRP strips on the bottom surface of it is validated using experimental data, and then, using numerical modeling, 7 different models of square-shaped composite slab roofs are developed in ABAQUS software using the finite element modeling. Developed models include steel rebar reinforced concrete slab with variable thickness of CFRP and steel plates. Considering the control sample which has no external reinforcement, a set of 8 different reinforcement states has been investigated. Each of these 8 states is examined with 6 different uncertainties in terms of the properties of the materials in the construction of concrete slabs, which make 48 numerical models. In all models loading process is continued until complete failure occurs. The results from numerical investigations showed using the steel plates as an executive method for strengthening, the bending capacity of reinforced concrete slabs is increased in the ultimate bearing capacity of the slab by about 1.69 to 2.48 times. Also using CFRP strips, the increases in ultimate bearing capacity of the slab were about 1.61 to 2.36 times in different models with different material uncertainties.

Keywords

References

  1. Abdul-Salam, B., Farghaly, A.S. and Benmokrane, B. (2016), "Mechanisms of shear resistance of one-way concrete slabs reinforced with FRP bars", Constr. Build. Mater., 127, 959-970. https://doi.org/10.1016/j.conbuildmat.2016.10.015
  2. Agbossou, A., Michel, L., Lagache, M. and Hamelin, P. (2008), "Strengthening slabs using externally-bonded strip composites: Analysis of concrete covers on the strengthening", Compos. Part B: Eng., 39(7-8), 1125-1135. https://doi.org/10.1016/j.compositesb.2008.04.002
  3. Eldib, M.E.A.H., Maaly, H.M., Beshay, A.W. and Tolba, M.T. (2009), "Modelling and analysis of two-way composite slabs", J. Constr. Steel Res., 65(5), 1236-1248. https://doi.org/10.1016/j.jcsr.2009.01.002
  4. Fang, H., Xu, X., Liu, W., Qi, Y., Bai, Y., Zhang, B. and Hui, D. (2016), "Flexural behavior of composite concrete slabs reinforced by FRP grid facesheets", Compos. Part B: Eng., 92, 46-62. https://doi.org/10.1016/j.compositesb.2016.02.029
  5. Genikomsou, A.S. and Polak, M.A. (2015), "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS", Eng. Struct., 98, 38-48. https://doi.org/10.1016/j.engstruct.2015.04.016
  6. Hedaoo, N.A., Gupta, L.M. and Ronghe, G.N. (2012), "Design of composite slabs with profiled steel decking: a comparison between experimental and analytical studies", Int. J. Adv. Struct. Eng., 4(1), 1-15. https://doi.org/10.1186/2008-6695-3-1
  7. Kasu, S.R., Tangudu, J., Chandrappa, A.K. and Reddy, M.A. (2021), "Influence of stiffness of dry lean concrete base on load stresses in the plain cement concrete slab of concrete pavements", Road Mater. Pave. Des., 23(8), 1942-1955. https://doi.org/10.1080/14680629.2021.1924237
  8. Kim, H.-Y., You, Y.-J., Ryu, G.-S., Ahn, G.-H. and Koh, K.-T. (2021), "Concrete slab-type elements strengthened with cast-in-place carbon textile reinforced concrete system", Materials, 14(6), 1437. https://doi.org/10.3390/ma14061437
  9. Liang, H., Xie, W., Wei, P., Zhou, Y. and Zhang, Z. (2021), "The effect of the decorative surface layer on the dynamic properties of a symmetric concrete slab", Symmetry, 13(7), 1174. https://doi.org/10.3390/sym13071174
  10. Liao, W., Zeng, C., Zhuang, Y., Ma, H., Deng, W. and Huang, J. (2021), "Mitigation of thermal curling of concrete slab using phase change material: A feasibility study", Cement Concrete Compos., 120, 104021. https://doi.org/10.1016/j.cemconcomp.2021.104021
  11. Mamede, N.F.S., Ramos, A.P. and Faria, D.M. (2013), "Experimental and parametric 3D nonlinear finite element analysis on punching of flat slabs with orthogonal reinforcement", Eng. Struct., 48, 442-457. https://doi.org/10.1016/j.engstruct.2012.09.035
  12. Mou, B., Zhao, F., Wang, F. and Pan, W. (2021), "Effect of reinforced concrete slab on the flexural behavior of composite beam to column joints: Parameter study and evaluation formulae", J. Constr. Steel Res., 176, 106425. https://doi.org/10.1016/j.jcsr.2020.106425
  13. Ramos, A., Correia, A.G., Calcada, R., Costa, P.A., Esen, A., Woodward, P.K., Connolly, D.P. and Laghrouche, O. (2021), "Influence of track foundation on the performance of ballast and concrete slab tracks under cyclic loading: Physical modelling and numerical model calibration", Constr. Build. Mater., 277, 122245. https://doi.org/10.1016/j.conbuildmat.2021.122245
  14. Soufeiani, L., Ghadyani, G., Kueh, A.B.H. and Nguyen, K.T.Q. (2017), "The effect of laminate stacking sequence and fiber orientation on the dynamic response of FRP composite slabs", J. Build. Engi., 13, 41-52. https://doi.org/10.1016/j.jobe.2017.07.004
  15. Teng, X. and Zhang, Y.X. (2014), "Nonlinear finite element analyses of FRP-strengthened reinforced concrete slabs using a new layered composite plate element", Compos. Struct., 114, 20-29. https://doi.org/10.1016/j.compstruct.2014.03.040
  16. Tzaros, K.A., Mistakidis, E.S. and Perdikaris, P.C. (2010), "A numerical model based on nonconvex-nonsmooth optimization for the simulation of bending tests on composite slabs with profiled steel sheeting", Eng. Struct., 32(3), 843-853. https://doi.org/10.1016/j.engstruct.2009.12.010