Steel and Composite Structures

  • 제43권5호
  • /
  • Pages.533-552
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic stability and structural improvement of vibrating electrically curved composite screen subjected to spherical impactor: Finite element and analytical methods

  • Xiao, Caiyuan (Key Laboratory of Hunan Province for Efficient Power System and Intelligent Manufacturing) ;
  • Zhang, Guiju (Key Laboratory of Hunan Province for Efficient Power System and Intelligent Manufacturing)
  • 투고 : 2020.07.13
  • 심사 : 2022.03.31
  • 발행 : 2022.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The current article deals with the dynamic stability, and structural improvement of vibrating electrically curved screen on the viscoelastic substrate. By considering optimum value for radius curvature of the electrically curved screen, the structure improvement of the system occurs. For modeling the electrically system, the Maxwell's' equation is developed. Hertz contact model in employed to obtain contact forces between impactor and structure. Moreover, variational methods and nonlinear von Kármán model are used to derive boundary conditions (BCs) and nonlinear governing equations of the vibrating electrically curved screen. Galerkin and Multiple scales solution approach are coupled to solve the nonlinear set of governing equations of the vibrating electrically curved screen. Along with the analytical solution, 3D finite element simulation via ABAQUS package is provided with the aid of a FE package for simulating the current system's response. The results are categorized in 3 different sections. First, effects of geometrical and material parameters on the vibrational performance and stability of the curves panel. Second, physical properties of the impactor are taken in to account and their effect on the absorbed energy and velocity profile of the impactor are presented. Finally, effect of the radius and initial velocity on the mode shapes of the current structure is demonstrated.

키워드

과제정보

This work was supported by Scientific Research Fund of Hunan Provincial Education Department (No.15C1240) and Innovation platform open fund Project (No.16K080) and Scientific Research Fund of Hunan Provincial Education Department (NO.20C1651).

참고문헌

  1. Abedini, M., Shi, L., Mehrmashhadi, J., Chen, C., Alipour, R., Toghroli, A. and Khorami, M. (2020), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Front. Struct. Civ. Eng., 14(3). https://doi.org/10.1007/s11709-020-0604-9.
  2. Abualnour, M., Chikh, A., Hebali, H., Kaci, A., Tounsi, A., Bousahla, A.A. and Tounsi, A. (2019), "Thermomechanical analysis of antisymmetric laminated reinforced composite plates using a new four variable trigonometric refined plate theory", Comput. Concrete, 24(6), 489-498. https://doi.org/10.12989/cac.2019.24.6.489.
  3. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., Al-Furjan, M. and Chen, G. (2020), "Critical Temperature and Frequency Characteristics of GPLs-Reinforced Composite Doubly Curved Panel", Appl. Sciences, 10(9). https://doi.org/10.3390/app10093251.
  4. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  5. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255. https://doi.org/10.1016/j.compstruct.2020.112990.
  6. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  7. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257. https://doi.org/10.1016/j.compstruct.2020.113146.
  8. Al-Furjan, M., Habibi, M., Chen, G., Safarpour, H., Safarpour, M. and Tounsi, A. (2020), "Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM", Compos. Struct., 252. https://doi.org/10.1016/j.compstruct.2020.112737.
  9. Al-Furjan, M., Habibi, M., won Jung, D., Chen, G., Safarpour, M. and Safarpour, H. (2020), "Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doublycurved panel", Eur. J. Mech. A-Solid., 85. https://doi.org/10.1016/j.euromechsol.2020.104091.
  10. Al-Furjan, M., Habibi, M., won Jung, D., Sadeghi, S., Safarpour, H., Tounsi, A. and Chen, G. (2020), "A computational framework for propagated waves in a sandwich doubly curved nanocomposite panel", Eng. Comput., 38, 1-18. https://doi.org/10.1007/s00366-020-01130-8.
  11. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257. https://doi.org/10.1016/j.compstruct.2020.113152.
  12. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Seminumerical and finite element modeling", Thin. Wall. Struct., 159(12). https://doi.org/10.1016/j.tws.2020.107242.
  13. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via twodimensional analysis", Thin. Wall. Struct., 157. https://doi.org/10.1016/j.tws.2020.107111.
  14. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H., Jung, D.W. and Tounsi, A. (2020), "On the wave propagation of the multi-scale hybrid nanocomposite doubly curved viscoelastic panel", Compos. Struct., https://doi.org/10.1016/j.compstruct.2020.112947.
  15. Ali, S. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys., 7(11), 1828-1831. https://doi.org/10.5897/ijps11.1604.
  16. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  17. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Behavior of through Beam Connections Composed of CFSST Columns and Steel Beams by Finite Element Studying", Adv. Mater. Res., 168-170 2329-2333. 10.4028/www.scientific.net/AMR.168-170.2329.
  18. Arefi, M. and Amabili, M. (2020), "A comprehensive electromagneto-elastic buckling and bending analyses of three-layered doubly curved nanoshell, based on nonlocal three-dimensional theory", Compos. Struct., 257. https://doi.org/10.1016/j.compstruct.2020.113100.
  19. Asghar, S., Naeem, M.N., Hussain, M., Taj, M. and Tounsi, A. (2020), "Prediction and assessment of nonlocal natural frequencies of DWCNTs: Vibration analysis", Comput. Concrete., 25(2), 133-144. https://doi.org/10.12989/cac.2020.25.2.133.
  20. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Seminumerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  21. Belbachir, N., Bourada, M., Draiche, K., Tounsi, A., Bourada, F., Bousahla, A.A. and Mahmoud, S. (2020), "Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory", Smart Struct. Sys., 25(4), 409-422. https://doi.org/10.12989/sss.2020.25.4.409.
  22. Belbachir, N., Draich, K., Bousahla, A.A., Bourada, M., Tounsi, A. and Mohammadimehr, M. (2019), "Bending analysis of antisymmetric cross-ply laminated plates under nonlinear thermal and mechanical loadings", Steel Compos. Struct,. 33(1), 81-92. https://doi.org/10.12989/scs.2019.33.1.081.
  23. Boussoula, A., Boucham, B., Bourada, M., Bourada, F., Tounsi, A., Bousahla, A.A. and Tounsi, A. (2020), "A simple nth-order shear deformation theory for thermomechanical bending analysis of different configurations of FG sandwich plates", Smart Struct. Sys., 25(2), 197-218. https://doi.org/10.12989/sss.2020.25.2.197.
  24. Cai, C., Gao, X., Teng, Q., Kiran, R., Liu, J., Wei, Q. and Shi, Y. (2020), "Hot isostatic pressing of a near α-Ti alloy: Temperature optimization, microstructural evolution and mechanical performance evaluation", Mater. Sci. Eng: A., 802. https://doi.org/10.1016/j.msea.2020.140426.
  25. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284(3). https://doi.org/10.1016/j.compstruct.2022.115195.
  26. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.w., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Based Des. Struct., 50(4), 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  27. Cui, L., Ji, M. and Zhou, S. (2020), "Wave Loading on a Group of Cylinders in Fairly Perfect Fluid", J. Coastal Res., 103(SI), 288-292. https://doi.org/10.2112/SI103-061.1.
  28. Dai, H. and Safarpour, H. (2021), "Frequency and thermal buckling information of laminated composite doubly curved open nanoshell", Adv. Nano Res., 10(1), 1-14. https://doi.org/10.12989/anr.2021.10.1.001.
  29. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  30. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021), "On the vibrations of the non-polynomial viscoelastic composite opentype shell under residual stresses", Compos. Struct., 263. https://doi.org/10.1016/j.compstruct.2021.113599.
  31. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel and Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  32. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel and Compos. Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.
  33. Di, B., Hu, Q., Shen, Z., Zhang, W. and Wang, C. (2020). "Low velocity impact analysis of high-order rectangular FG-CNTRC plates using the weak form QEM", IOP Conference Series: Materials Science and Engineering, Sanya, China, December.
  34. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  35. Donnell, L.H. (1934), "A new theory for the buckling of thin cylinders under axial compression and bending".
  36. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  37. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019), "Buckling and vibration characteristics of a carbon nanotubereinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science., 233(13), 4590-4605, United Kingdom. https://doi.org/10.1177/0954406219832323.
  38. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  39. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave Random Complex, 31(6), 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  40. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Euro. Phys. J. Plus., 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  41. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct., 47(5), 521-545. doi/10.1080/15397734.2019.1566743.
  42. Forsat, M., Musharavati, F., Eltai, E., Zain, A.M., Mobayen, S. and Mohamed, A.M. (2021), "Vibration characteristics of microplates with GNPs-reinforced epoxy core bonded to piezoelectric-reinforced CNTs patches", Adv. Nano Res., 11(2), 115-140. https://doi.org/10.12989/anr.2021.11.2.115.
  43. Gao, N., Zhang, Z., Deng, J., Guo, X., Cheng, B. and Hou, H. (2022), "Acoustic Metamaterials for Noise Reduction: A Review", Adv. Mater. Tech., 2100698. https://doi.org/10.1002/admt.202100698.
  44. Ghabussi, A., Habibi, M., NoormohammadiArani, O., Shavalipour, A., Moayedi, H. and Safarpour, H. (2020), "Frequency characteristics of a viscoelastic graphene nanoplatelet-reinforced composite circular microplate", J. Vib. Control, 27(1-2). https://doi.org/10.1177/1077546320923930.
  45. Ghamkhar, M., Khadimallah, M.A., Iqbal, M.Z., Hussain, M., Yahya, A., Khedher, K.M., Naeem, M.N. and Tounsi, A. (2021), "Performance of FGM bilayered cylindrical shell placed on cantilever edge", Adv. Nano Res., 11(4), 339-345. https://doi.org/10.12989/anr.2021.11.4.339.
  46. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  47. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  48. Guo, Y., Mi, H. and Habibi, M. (2021), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157. https://doi.org/10.1016/j.ymssp.2021.107723.
  49. Habibi, M., Darabi, R., Sa, J.C.d. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications., 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  50. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  51. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Euro. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  52. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636, London, United Kingdom, August. https://doi.org/10.1177/1464420716642258
  53. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Performance, 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  54. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Process., 31 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  55. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019), "Wave propagation characteristics of the electrically GNPreinforced nanocomposite cylindrical shell", J. Braz. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  56. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 1-30. https://doi.org/10.1080/15397734.2019.1701490.
  57. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct., 1-19. https://doi.org/10.1080/15397734.2019.1697932.
  58. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct., 1-22. https://doi.org/10.1080/15397734.2020.1779086.
  59. Habibi, M., Taghdir, A. and Safarpour, H. (2019), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B-Eng., 175 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  60. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex, 1-27. https://doi.org/10.1080/17455030.2019.1662968.
  61. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166 108019. https://doi.org/10.1016/j.tws.2021.108019.
  62. He, Z., Shi, X., Li, E. and Li, X. (2020), "Elastic properties and multi-scale design of long carbon fiber nonwoven reinforced plane-based isotropic composite", Compos. Struct., 251 112657. https://doi.org/10.1016/j.compstruct.2020.112657.
  63. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel and Compos. Struct,. 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  64. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  65. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021), "Dynamic stability/instability simulation of the rotary sizedependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  66. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  67. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., https://doi.org/10.1007/s00366-021-01320-y.
  68. Hussain, M., Naeem, M.N., Taj, M. and Tounsi, A. (2020), "Simulating vibration of single-walled carbon nanotube using Rayleigh-Ritz's method", Adv. Nano Res., 8(3), 215-228. https://doi.org/10.12989/anr.2020.8.3.215.
  69. Hussain, M., Naeem, M.N., Tounsi, A. and Taj, M. (2019), "Nonlocal effect on the vibration of armchair and zigzag SWCNTs with bending rigidity", Adv. Nano Res., 7(6), 431-442. https://doi.org/10.12989/anr.2019.7.6.431.
  70. Ismail, M., Shariati, M., Awal, A.S.M.A., Chiong, C.E., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel and Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  71. Jermsittiparsert, K., Ghabussi, A., Forooghi, A., Shavalipour, A., Habibi, M., won Jung, D. and Safa, M. (2020), "Critical voltage, thermal buckling and frequency characteristics of a thermally affected GPL reinforced composite microdisk covered with piezoelectric actuator", Mech. Based Des. Struct., 1-23. https://doi.org/10.1080/15397734.2020.1748052.
  72. Jiao, J., Ghoreishi, S.-m., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magnetoelectro-elastic nanosystem", Eng. Comput,. https://doi.org/10.1007/s00366-021-01391-x.
  73. Kakati, S. and Chakraborty, D. (2020), "Delamination in GLARE laminates under low velocity impact", Compos. Struct., 240. https://doi.org/10.1016/j.compstruct.2020.112083
  74. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  75. Khadimallah, M.A., Hussain, M., Naeem, M.N., Taj, M. and Tounsi, A. (2021), "Monitoring and control of multiple fraction laws with ring based composite structure", Adv. Nano Res,. 10(2), 129-138. https://doi.org/10.12989/anr.2021.10.2.129.
  76. Khadimallah, M.A., Hussain, M., Taj, M., Ayed, H. and Tounsi, A. (2021), "Parametric vibration analysis of single-walled carbon nanotubes based on Sanders shell theory", Adv. Nano Res., 10(2), 165-174. https://doi.org/10.12989/anr.2021.10.2.165.
  77. Khalkhali, A., Geran Malek, N. and Bozorgi Nejad, M. (2020), "Effects of the impactor geometrical shape on the non-linear low-velocity impact response of sandwich plate with CNTRC face sheets", J. Sandw. Struct. Mater., 22(4), 962-990. https://doi.org/10.1177/1099636218778998.
  78. Khorasani, M., Eyvazian, A., Karbon, M., Tounsi, A., Lampani, L. and Sebaey, T.A. (2020), "Magneto-electro-elastic vibration analysis of modified couple stress-based three-layered micro rectangular plates exposed to multi-physical fields considering the flexoelectricity effects", Smart Struct. Sys., 26(3), 331-343. https://doi.org/10.12989/sss.2020.26.3.331.
  79. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel and Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  80. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of Tilted Angle Shear Connectors", PLoS One., 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  81. Kumar, P. and Srinivas, J. (2017), "Vibration, buckling and bending behavior of functionally graded multi-walled carbon nanotube reinforced polymer composite plates using the layerwise formulation", Compos. Struct., 177, 158-170. https://doi.org/10.1016/j.compstruct.2017.06.055.
  82. Kumar, Y., Gupta, A. and Tounsi, A. (2021), "Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model", Adv. Nano Res., 11(1), 1-17. https://doi.org/10.12989/anr.2021.11.1.001.
  83. Leissa, A.W. (1973), "Vibration of shells, scientific and technical information office", Research Report No. LC-77-186367; National Aeronautics and Space Administration, Washington, D.C., USA.
  84. Li, J., Tang, F. and Habibi, M. (2020), "Bi-directional thermal buckling and resonance frequency characteristics of a GNPreinforced composite nanostructure", Eng. Comput., 38(4), 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  85. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 38(19), 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  86. Liang, Z.M., Wang, G.Y., Sun, Z.B., Wang, D.L., Wang, L.W. and Liang, Y.M. (2022), "Rapidly improved tensile strength of 6N01 Al alloy FSW joints by electropulsing and artificial aging treatment", Mater. Sci. Eng. A., 841. https://doi.org/10.1016/j.msea.2022.143056.
  87. Lin, S., Thorsson, S.I. and Waas, A.M. (2020), "Predicting the low velocity impact damage of a quasi-isotropic laminate using EST", Compos. Struct., 251(10). https://doi.org/10.1016/j.compstruct.2020.112530.
  88. Liu, H., Liu, J., Ding, Y., Zhou, J., Kong, X., Blackman, B.R., Kinloch, A.J., Falzon, B.G. and Dear, J.P. (2020), "Effects of impactor geometry on the low-velocity impact behaviour of fibre-reinforced composites: an experimental and theoretical investigation", Appl. Compos. Mater., 27(5), 533-553. https://doi.org/10.1007/s10443-020-09812-8.
  89. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  90. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  91. Liu, X., Zheng, W., Mou, Y., Li, Y. and Yin, L. (2021), "Microscopic 3D reconstruction based on point cloud data generated using defocused images", Meas. Control, 54(9-10), 1309-1318. https://doi.org/10.1177/00202940211033881.
  92. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  93. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  94. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Based Des. Struct., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  95. Long, X., Jia, Q., Shen, Z., Liu, M. and Guan, C. (2021), "Strain rate shift for constitutive behaviour of sintered silver nanoparticles under nanoindentation", Mech. Mater., 158 103881. https://doi.org/10.1016/j.mechmat.2021.103881.
  96. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 37, 1-20. https://doi.org/10.1007/s00366-020-01004-z.
  97. Love, A.E.H. (2013), A treatise on the mathematical theory of elasticity, Cambridge university press, Cambridge, England.
  98. Lu, N., Wang, H., Wang, K. and Liu, Y. (2021), "Maximum probabilistic and dynamic traffic load effects on short-tomedium span bridges", Comput. Modeling Eng. Sci., 127(1), 345-360. https://doi.org/10.32604/cmes.2021.013792.
  99. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech..-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  100. Lv, T. and Du, H. (2020), "Automatic Calculation Method for Mechanical Load of Full Rotation Crane Ship Based on Flow Function Theory", J. Coastal Res., 103(SI), 412-416. https://doi.org/10.2112/SI103-0841.
  101. Ma, L., Liu, X. and Moradi, Z. "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  102. Madenci, E. (2021), "Free vibration analysis of carbon nanotube RC nanobeams with variational approaches", Adv. Nano Res., 11(2), 157-171. https://doi.org/10.12989/anr.2021.11.2.157.
  103. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  104. Matouk, H., Bousahla, A.A., Heireche, H., Bourada, F., Bedia, E., Tounsi, A., Mahmoud, S., Tounsi, A. and Benrahou, K. (2020), "Investigation on hygro-thermal vibration of P-FG and symmetric S-FG nanobeam using integral Timoshenko beam theory", Adv. Nano Res., 8(4), 293-305. https://doi.org/10.12989/anr.2020.8.4.293.
  105. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica a-Statistical Mech. Appl., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  106. Mindlin, R. (1951), "Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates", J. appl. Mech., 18 31-38. https://doi.org/10.1115/1.4010217.
  107. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  108. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-020-01002-1.
  109. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023.
  110. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  111. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  112. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Sys., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  113. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. https://doi.org/10.12989/anr.2022.12.4.375.
  114. Mojtaba, D. (2011), "A new finite element investigation on prebent steel strips as damper for vibration control", Int. J. Phys., 6(36), 8044-8050. https://doi.org/10.5897/IJPS11.1585.
  115. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Coplex Media., 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  116. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel and Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  117. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.w. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 39(7), 1-12. https://doi.org/10.1080/07391102.2020.1751297.
  118. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel and Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  119. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Sys., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  120. Nouri, K., Sulong, N.H.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of Novel Stiffened Angle Shear Connectors at Ambient and Elevated Temperatures", Advanced Steel Construct., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.
  121. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Scientific Reports, 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  122. Papa, I., Boccarusso, L., Langella, A. and Lopresto, V. (2020), "Carbon/glass hybrid composite laminates in vinylester resin: Bending and low velocity impact tests", Compos. Struct., 232 111571. https://doi.org/10.1016/j.compstruct.2019.111571.
  123. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  124. Qi, Y.-N., Dai, H.-L. and Deng, S.-T. (2020), "Thermoelastic analysis of stiffened sandwich doubly curved plate with FGM core under low velocity impact", Compos. Struct., 253 112826. https://doi.org/10.1016/j.compstruct.2020.112826.
  125. Rashidpour, P., Ghadiri, M. and Zajkani, A. (2020), "Low-velocity impact analysis of viscoelastic composite laminated nanoplate based on nonlocal strain gradient theory for different boundary conditions", J. Sandw. Struct. Mater., 23(7), 1099636220925070. https://doi.org/10.1177/1099636220925070.
  126. Reddy, J.N. (2003), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC press, Boca Raton, Florida, USA.
  127. Refrafi, S., Bousahla, A.A., Bouhadra, A., Menasria, A., Bourada, F., Tounsi, A., Bedia, E., Mahmoud, S., Benrahou, K.H. and Tounsi, A. (2020), "Effects of hygro-thermo-mechanical conditions on the buckling of FG sandwich plates resting on elastic foundations", Comput. Concrete, 25(4), 311-325. https://doi.org/10.12989/cac.2020.25.4.311.
  128. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Sys., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  129. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica a-Statistical Mechanics and Its Applications, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  130. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Bin Baharom, S., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel and Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  131. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus., 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  132. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019), "A sizedependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Design. 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  133. Safarpour, H., Pourghader, J. and Habibi, M. (2019), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 1077546319828465. https://doi.org/10.1177/1077546319828465.
  134. Safarpour, H., Pourghader, J. and Habibi, M. (2019), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  135. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-00949-5.
  136. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel and Compos. Struct. 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  137. Sanders, J.L. (1960), An Improved First-Approximation Theory for Thin Shells, US Government Printing Office, Washington, D.C., USA.
  138. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Sys., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  139. Semmah, A., Heireche, H., Bousahla, A.A. and Tounsi, A. (2019), "Thermal buckling analysis of SWBNNT on Winkler foundation by non local FSDT", Adv. Nano Res., 7(2), 89. https://doi.org/10.12989/anr.2019.7.2.089.
  140. Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin. Wall. Struct., 106 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  141. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel and Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651.
  142. Shahabi, S.E.M., Sulong, N.H.R., Shariati, M. and Shah, S.N.R. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel and Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  143. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  144. Shariati, A., Ghabussi, A., Habibi, M., Safarpour, H., Safarpour, M., Tounsi, A. and Safa, M. (2020), "Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation", Thin Wall. Struct. 154 106840. https://doi.org/10.1016/j.tws.2020.106840.
  145. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput. 37, 1-20. https://doi.org/10.1007/s00366-020-01024-9.
  146. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Materials. 13(7), 1707. https://doi.org/10.3390/ma13071707.
  147. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry. 12(4), 586. https://doi.org/10.3390/sym12040586.
  148. Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52(0), 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.
  149. Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya, Kuala Lumpur.
  150. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z.Y. and Shariati, A. (2021), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  151. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel and Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  152. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel and Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  153. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  154. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel and Compos. Struct.34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.
  155. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Sys. 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  156. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N.A., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019), "Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete", Appl. Sciences-Basel., 9(24), 5534. https://doi.org/10.3390/app9245534.
  157. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  158. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N.A. and Poi-Ngian, S. (2019), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel and Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  159. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel and Compos. Struct., 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.
  160. Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P., Shariat, A., Trung, N.T., Salih, M.N.A. and Poi-Ngian, S. (2019), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.
  161. Shariati, M., Ramli-Sulong, N.H., Arabnejad, K.H.M.M., Shafigh, P. and Sinaei, H. (2011), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays., 6(1), 213-220. https://doi.org/10.5897/SRE10.879.
  162. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  163. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays., 6(4), 977-983. https://doi.org/10.5897/SRE10.1120.
  164. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011). "Experimental and Numerical Investigations of Channel Shear Connectors in High Strength Concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Ulaanbaatar, July.
  165. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012). "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, The Hague, July.
  166. Shariati, M., Shariati, A., Sulong, N.H.R., Suhatril, M. and Khanouki, M.M.A. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  167. Shariati, M., Sulong, N.H.R. and Khanouki, M.M.A. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Design, 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  168. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Design, 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  169. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  170. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel and Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  171. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017). "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017, Zurich, September.
  172. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel and Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  173. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science., 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  174. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  175. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays, 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393
  176. Song, M., Kitipornchai, S. and Yang, J. (2017), "Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets", Compos. Struct., 159, 579-588. https://doi.org/10.1016/j.compstruct.2016.09.070.
  177. Song, M., Li, X., Kitipornchai, S., Bi, Q. and Yang, J. (2019), "Low-velocity impact response of geometrically nonlinear functionally graded graphene platelet-reinforced nanocomposite plates", Nonlinear Dynam., 95(3), 2333-2352. https://doi.org/10.1007/s11071-018-4695-y.
  178. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear Capacity of C-Shaped and LShaped Angle Shear Connectors", PLoS One., 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.
  179. Tan, H., He, Z., Li, E., Tan, X., Cheng, A. and Li, Q. (2020), "Energy absorption characteristics of three-layered sandwich panels with graded re-entrant hierarchical honeycombs cores", Aerosp. Sci. Technol., 106, https://doi.org/10.1016/j.ast.2020.106073.
  180. Tlidji, Y., Benferhat, R., Trinh, L.C., Tahar, H.D. and Abdelouahed, T. (2021), "New state-space approach to dynamic analysis of porous FG beam under different boundary conditions", Adv. Nano Res., 11(4), 347-359. https://doi.org/10.12989/anr.2021.11.4.347.
  181. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel and Compos. Struct., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.
  182. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf., 29(8), 1793-1801. http://dx.doi.org/10.1007/s10845-016-1217-y.
  183. Tounsi, A., Al-Dulaijan, S., Al-Osta, M.A., Chikh, A., Al-Zahrani, M., Sharif, A. and Tounsi, A. (2020), "A four variable trigonometric integral plate theory for hygro-thermo-mechanical bending analysis of AFG ceramic-metal plates resting on a twoparameter elastic foundation", Steel and Compos. Struct., 34(4), 511-524. https://doi.org/10.12989/scs.2020.34.4.511.
  184. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Sys. 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  185. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  186. Wang, A., Chen, H., Hao, Y. and Zhang, W. (2018), "Vibration and bending behavior of functionally graded nanocomposite doublycurved shallow shells reinforced by graphene nanoplatelets", Results in Physics., 9 550-559. https://doi.org/10.1016/j.rinp.2018.02.062.
  187. Wang, L., Huang, Y., Xie, Y. and Du, Y. (2020), "A new regularization method for dynamic load identification", Science Progress., 103(3), https://doi.org/10.1177/0036850420931283.
  188. Wang, M., Yang, X. and Wang, W. (2022), "Establishing a 3D aggregates database from X-ray CT scans of bulk concrete", Constr. Build. Mater., 315, https://doi.org/10.1016/j.conbuildmat.2021.125740.
  189. Wang, Q. (2002), "On buckling of column structures with a pair of piezoelectric layers", Eng. Struct., 24(2), 199-205. https://doi.org/10.1016/S0141-0296(01)00088-8.
  190. Wang, X. and Lyu, X. (2021), "Experimental study on vertical water entry of twin spheres side-by-side", Ocean Eng., 221(5), https://doi.org/10.1016/j.oceaneng.2020.108508.
  191. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struc., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  192. Wei, X., Shariati, M., Zandi, Y., Pei, S.L., Jin, Z.B., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel and Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.
  193. Wei, Z., Chen, W., Wang, Z., Li, N., Zhang, P., Zhang, M., Zhao, L. and Qiang, Q. (2021), "High-temperature persistent luminescence and visual dual-emitting optical temperature sensing in self-activated CaNb2O6: Tb3+ phosphor", J. Am. Ceram. Soc., 104(4), 1750-1759. https://doi.org/10.1111/jace.17579.
  194. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast- rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  195. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., https://doi.org/10.1016/j.compstruct.2021.114395.
  196. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  197. Yang, S. and Sun, C. (1982), "Indentation law for composite laminates", Composite Materials: Testing and Design (6th Conference), Arizona, January.
  198. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280(2). https://doi.org/10.1016/j.jclepro.2020.124138.
  199. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic highorder computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165. https://doi.org/10.1016/j.ymssp.2021.108373.
  200. Yu, X., Sun, Y., Zhao, D. and Wu, S. (2021), "A revised contact stiffness model of rough curved surfaces based on the length scale", Tribol. Int., 164. https://doi.org/10.1016/j.triboint.2021.107206.
  201. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Sys., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  202. Zarga, D., Tounsi, A., Bousahla, A.A., Bourada, F. and Mahmoud, S. (2019), "Thermomechanical bending study for functionally graded sandwich plates using a simple quasi-3D shear deformation theory", Steel and Compos. Struct., 32(3), 389-410. https://doi.org/10.12989/scs.2019.32.3.389.
  203. Zhang, C. and Wang, H. (2019), "Robustness of the active rotary inertia driver system for structural swing vibration control subjected to multi-type hazard excitations", Appl. Sci., 9(20). https://doi.org/10.3390/app9204391.
  204. Zhang, C. and Wang, H. (2019), "Swing vibration control of suspended structure using active rotary inertia driver system: Parametric analysis and experimental verification", Appl. Sci., 9(15). https://doi.org/10.3390/app9153144.
  205. Zhang, C. and Wang, H. (2020), "Swing vibration control of suspended structures using the Active Rotary Inertia Driver system: Theoretical modeling and experimental verification", Struct. Health Monit., 27(6), https://doi.org/10.1002/stc.2543.
  206. Zhang, S., Pak, R.Y. and Zhang, J. (2020), "Vertical timeharmonic coupling vibration of an impermeable, rigid, circular plate resting on a finite, poroelastic soil layer", Acta Geotechnica., 16, 1-25. https://doi.org/10.1007/s11440-020-01067-8.
  207. Zhang, X., Shamsodin, M., Wang, H., NoormohammadiArani, O., Khan, A.M., Habibi, M. and Al-Furjan, M. (2020), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn., 39(9), 1-16. https://doi.org/10.1080/07391102.2020.1760939.
  208. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave Random Complex, 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  209. Zhang, Z., Wang, L., Zheng, W., Yin, L., Hu, R. and Yang, B. (2022), "Endoscope image mosaic based on pyramid ORB", Biomed. Signal Process. Control., 71. https://doi.org/10.1016/j.bspc.2021.103261.
  210. Zhao, J., Zhang, Y., He, X. and Xie, P. (2020), "Covid-ct-dataset: a ct scan dataset about covid-19", arXiv preprint arXiv:2003.13865., 490. https://doi.org/10.48550/arXiv.2003.13865.
  211. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. "Bending and stress responses of the hybrid axisymmetric system via statespace method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  212. Zheng, W., Liu, X. and Yin, L. (2021), "Research on image classification method based on improved multi-scale relational network", PeerJ Computer Science., 7, e613. https://doi.org/10.7717/peerj-cs.613
  213. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  214. Zhou, G., Li, W., Zhou, X., Tan, Y., Lin, G., Li, X. and Deng, R. (2021), "An innovative echo detection system with STM32 gated and PMT adjustable gain for airborne LiDAR", Int. J. Remote Sens., 42(24), 9187-9211. https://doi.org/10.1080/01431161.2021.1975844.
  215. Zhou, J., He, Y., Shen, J., Essa, F. and Yu, J. (2021), "Ni/Ni3Al interface-dominated nanoindentation deformation and pop-in events", Nanotechnology., 33(10), 105703. https://doi.org/10.1088/1361-6528/ac3d62.
  216. Zhou, J., Wen, P. and Wang, S. (2020), "Numerical investigation on the repeated low-velocity impact behavior of composite laminates", Compos. Part B-Eng., 185(8). https://doi.org/10.1016/j.compositesb.2020.107771.
  217. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel and Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.
  218. Zuo, C., Chen, Q., Gu, G., Feng, S., Feng, F., Li, R. and Shen, G. (2013), "High-speed three-dimensional shape measurement for dynamic scenes using bi-frequency tripolar pulse-widthmodulation fringe projection", Opt. Laser. Eng., 51(8), 953-960. https://doi.org/10.1016/j.optlaseng.2013.02.012.