한국표면공학회지 (Journal of Surface Science and Engineering)

  • 제55권4호
  • /
  • Pages.202-214
  • /
  • 2022
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

Comparison of Deposition Behavior and Properties of Cyanide-free Electroless Au Plating on Various Underlayer Electroless Ni-P films

  • 투고 : 2022.04.27
  • 심사 : 2022.08.16
  • 발행 : 2022.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Internal connections between device, package and external terminals for connecting packaging and printed circuit board are normally manufactured by electroless Ni-P plating followed by immersion Au plating (ENIG process) to ensure the connection reliability. In this study, a new non-cyanide-based immersion and electroless Au plating solutions using thiomalic acid as a complexing agent and aminoethanethiol as a reducing agent was investigated on different underlayer electroless Ni-P plating layers. As a result, it was confirmed that the deposition behavior and film properties of electroless Au plating are affected by grain size and impurity of the electroless Ni-P film, which is used as the plating underlayer. Au plating on the electroless Ni-P plating film with a dense surface structure showed the highest bonding strength. In addition, the electroless Au plating film on the Ni-P plating film has a smaller particle size exhibited higher bonding strength than that on the large particle size.

키워드

참고문헌

  1. A. Chinda, N. Miyamoto, O. Yoshioka, Gold plating thickness and soldering reliability of solder balls for electroless gold plated TAB tape carrier, J. Japan Inst. Electron. Packag., 3 (2000) 308-314. https://doi.org/10.5104/jiep.3.308
  2. T. Yamamoto, H. Watanabe, K. Izawa, H. Honma, Effect of electroless nickel-displacement gold plating process on solder joint strength, J. Japan Inst. Electron. Packag., 4 (2001) 56-62. https://doi.org/10.5104/jiep.4.56
  3. H. Ohta, Y. Momokawa, E. Kouno, M. Tsunemasu, Y. Tanaka, The destruction mode and the life cycle times of the chip size package mounted on the circuit board by the bending test, J. Japan Inst. Electron. Packag., 4 (2001) 519-522. https://doi.org/10.5104/jiep.4.519
  4. H. Matsuki, H. Ibuka, H. Saka, A TEM observation of solder joints of an electronic device, J. Japan Inst. Metals, 64 (2000) 261-270.
  5. Y. Kariya, K. Nakamura, M. Ohtsuka, H. Tanaka, 6th Symposium on Microjoining and Assembly Technology in Electronics, (2000) 415.
  6. T. Sugizaki, K. Tajima, T. Sasaki, H. Nakao, Y. Fukuda, T. Kimura, Effect of electroless nickel/immersion gold finishing on BGA solder joints, J. Japan Inst. Electron. Packag., 4 (2001) 124-127. https://doi.org/10.5104/jiep.4.124
  7. M. Kato, J. Sato, Y. Okinaka, T. Osaka, Substrate-catalyzed electroless gold plating, J. Surf. Finish. Soc. Jpn., 52 (2001) 600-606. https://doi.org/10.4139/sfj.52.600
  8. H. Yue, M. Lamson, Proc. 50th Electronic Components & Technology Conference, Effect of plating stubs of BGA packages on spurious EM radiation, IEEE, Las Vegas, NV (2000) 786-792.
  9. Y. Ejiri, T. Sakurai, Y. Arayama, K. Suzuki, Y. Tsubomatsu, S. Hatakeyama, S. Arike, Y. Hiroyama, K. Hasegawa, Electroless Ni/Pd/Au plating for semiconductor package substrates (I), J. Japan Inst. Electron. Packag., 15 (2012) 82-95. https://doi.org/10.5104/jiep.15.82
  10. T. Sugizaki, K. Tajima, T. Sasaki, H. Nakao, Y. Fukuda, T. Kimura, Effect of electroless nickel/Immersion gold finishing on BGA solder joint, J. Japan Inst. Electron. Packag., 4 (2001) 124-127. https://doi.org/10.5104/jiep.4.124
  11. H. K. Lee, S. H. Son, H. Y. Lee, J. M. Jeon, A study on the ENIG surface finish process and its properties, J. Kor. Inst. Surf. Eng., 40 (2007) 32-38. https://doi.org/10.5695/JKISE.2007.40.1.032
  12. T. Laurila, V. Vuorinen, J. K. Kivilahti, Interfacial reactions between lead-free solders and common base materials, Mater. Sci. Eng., R 49 (2005) 1-60. https://doi.org/10.1016/j.mser.2005.03.001
  13. T. Laurila, V. Vuorinen, J. K. Kivilahti, Analyses of interfacial reactions at different levels of interconnection Mater. Sci. Semicon. Proces., 7 (2004) 307-317. https://doi.org/10.1016/j.mssp.2004.09.129
  14. J. Ushio, O. Miyazawa, H . Yokono and A.Tomizawa, Electronic device plated with gold by means of an electroless gold plating solution, European Patent Application EP 021789, April 29 (1987) 86171.
  15. I. Takashi, Development of a non-cyanide electroless gold plating bath, J. Surf. Finish. Soc. Jpn., 52 (2001) 410-413. https://doi.org/10.4139/sfj.52.410
  16. Y. Shindo, H. Honma, Proceeding of the 84th Surface Finishing Society of Japan, (1991) 163.
  17. Y. Sato, T. Osawa, K. Kaieda, K. Kobayakawa, Cyanide-free electroless gold plating from a bath containing disulfitoaurate and thiourea or its derivatives, Plating Surf. Finishing, 81 (1994) 74.
  18. A. Sullivan, P. A. Kohl, The autocatalytic deposition of gold in nonalkaline, gold thiosulfate electroless bath, J. Electrochemical Soc., 142 (1995) 2250-2255. https://doi.org/10.1149/1.2044282
  19. T. Inoue, S. Ando, H. Okudaira, J. Ushio, A. Tomizawa, H. Takehara, T. Shimazaki, H. Yamamoto, H. Yokono, Stable non-cyanide electroless gold plating which is applicable to manufacturing of fine pattern printed wiring boards, Proc. 45th ECTC., (1995) 1059.
  20. I. Takashi, S. Ando, J. Ushio, H. Okudaira, H. Takehara, T. Ota, H. Yamamoto, H. Yokono, A very stable non-cyanide electroless gold plating bath using thiourea and hydroquinone as a cooperating double reductant system, J. Surf. Finish. Soc. Jpn., 49 (1998) 1298-1304. https://doi.org/10.4139/sfj.49.1298
  21. H. Nawafune, M. Matsuoka, 일간공업신문사 (2014) 83-180.
  22. 환경조화형도금기술; 전기도금연구회, 일간공업신문사 (2006) 62.
  23. 실용표면처리기술 시리즈 제3권 "무전해도금", 한국표면공학회 (2014) 44-46.
  24. J. Han, D. Kim, Deposition behavior of cyanide-free electroless Au plating solution using thiomalic acid as complexing agent and aminoethanethiol as reducing agent and characteristics of plated Au film, J. Surf. Sci. Eng., 55 (2022) 102-119.
  25. J. Han, D. Kim, Analysis of Cyanide Free Electroless Au Plating solution by Capillary Elecrop, J. Surf. Sci. Eng., 55 (2022) 120-132.
  26. J. Han, H. Lee, D. Kim, A Newly Developed Non-Cyanide Electroless Gold Plating Method Using Thiomalic Acid as a Complexing Agent and 2-Aminoethanethiol as a Reducing Agent, Corrosion Science and Tech., (2022) 89-99. https://doi.org/10.14773/CST.2012.11.3.089
  27. G. Koziol, A. Arazna, W. Steplewski, The characteristics of an electroless Nickel/immersion gold plated PWB surface finish and the quality of BGA solder joints, Plating & Surface Finishing, January/ February (2010) 39-40.
  28. V. Vuorinen, T. Laurila, H. Yu, J. K. Kivilahtia, Phase formation between lead-free Sn-Ag-Cu solder and Ni(P)Au finishes, J. Appl. Phys., 99 (2006) 023530.
  29. I. Kato, H. Terashima, H. Watanabe , H. Honma, Influence of electroless Ni-P film condition on wire bondability, J. Surf. Finish. Soc. Jpn., 62 (2011) 47-53. https://doi.org/10.4139/sfj.62.47
  30. T. Laurila, V. Vuorinen, Combined thermodynamic-kinetic analysis of the interfacial reactions between Ni metallization and various lead-free solders, Mater., 2 (2009) 1796-1834. https://doi.org/10.3390/ma2041796
  31. A. Kumar, Z. Chen, Effect of Ni-P thickness on the tensile strength of Cu/Electroless Ni-P/Sn-3.5Ag solder joint, 7th Electronics Packaging Technology Conference (2005) 873.
  32. K. Pun, P. L. Eu, M. N. Islam, C. Q. Cui, Effect of Ni layer thickness on intermetallic formation and mechanical strength of Sn-Ag-Cu solder joint, 10th Electronics Packaging Technology Conference (2008) 487.
  33. T. Kato, H. Terashima, H. Watanabe, M. Watanabe, H. Honma, O. Takai, Influence of complexing agents in electroless nickel strike plating solution for solder ball shear properties on electroless thin Ni/Au plated film, J. Surf. Finish. Soc. Jpn., 67 (2016) 545-550. https://doi.org/10.4139/sfj.67.545