DOI QR코드

DOI QR Code

High Power Energy Harvesting Systems for IoT Sensor Nodes Systems

IoT 센서노드 시스템을 위한 고출력 에너지 하베스팅 시스템

  • 김용석 (충북대학교 전자공학부) ;
  • 박용수 (충북대학교 전자공학부) ;
  • 백돈규 (충북대학교 전자공학부)
  • Received : 2022.06.22
  • Accepted : 2022.08.18
  • Published : 2022.08.30

Abstract

Existing IoT sensor nodes operate by receiving energy from a battery. But due to the characteristics of sensor nodes that are widely distributed for collecting various information, there is a disadvantage that the battery needs to be periodically replaced. In order to overcome this disadvantage, energy can be harvested from sunlight or high-temperature steam through an energy harvesting system. However, since the harvested power is quite limited, it is difficult to use applications that require instantaneous high power such as communication. We propose the design of the high-power energy harvesting system where a switch control unit compensates for the limited harvested energy with the energy storage device such as a capacitor. To verify the proposed system, an energy harvesting system based on sunlight was implemented, and we confirmed the maximum supply power to the application and the maximum supply time according to capacity of the energy storage device.

기존의 IoT 센서 노드는 배터리로부터 에너지를 공급받아 동작하는데, 넓게 분포되어 다양한 정보를 수집해야 하는 센서 노드의 특성상, 주기적으로 배터리를 새로 교체해야 하는 단점이 존재한다. 이 단점을 극복하기 위해 에너지 하베스팅 시스템을 통해 태양광이나 고온 증기 등으로부터 에너지를 수확할 수 있다. 하지만, 기존의 에너지 하베스팅 시스템은 공급전력이 상당히 제한적이기 때문에 통신과 같이 순간적으로 높은 전력을 요구하는 어플리케이션을 활용하기가 어렵다. 이 논문에서 우리가 제안하는 고출력 에너지 하베스팅 시스템은 기존 에너지 하베스팅의 단점을 보완한 Switch Control Unit을 설계하여 수확된 에너지양과 어플리케이션 동작 모드에 따라 수확된 에너지를 에너지 저장장치에 저장하거나 수확 및 저장된 에너지를 순간적으로 모두 어플리케이션에서 사용할 수 있도록 구상하였다. 제안한 시스템을 검증하기 위해 태양광을 기반으로 한 에너지 하베스팅 시스템을 구현하였으며 각각의 동작 모드에 따라 어플리케이션에 공급하는 전력량과 에너지 저장장치의 용량에 따른 최대 공급 시간을 확인하였다.

Keywords

Acknowledgement

이 논문은 충북대학교 국립대학육성사업(2021) 지원을 받아 작성되었음

References

  1. Cong Wang, Naehyuck Chang and Younghyun Kim, "Storage-less and converter-less maximum power point tracking of photovoltaic cells for a nonvolatile microprocessor", 2014 19th Asia and South Pacific Design Automation Conference (ASP-DAC), 2014, DOI: 10.1109/ASPDAC.2014.6742919
  2. Hyung Gyu Lee, Naehyuck Chang, "Powering the IoT: Storage-Less and Converter-Less Energy Harvesting", The 20th Asia and South Pacific Design Automation Conference, 2015, DOI: 10.1109/ASPDAC.2015.7058992
  3. Trishan Esram, Patrick L. Chapman, "Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques", IEEE Transactions on Energy Conversion, 2007, DOI: 10.1109/TEC.2006.874230
  4. Teodora Sanislav, George Dan Mois, Sherali Zeadally, Silviu Corneliu Folea, "Energy Harvesting Techniques for Internet of Things (IoT)", IEEE Access, 2021, DOI: 10.1109/ACCESS.2021.3064066
  5. F. Shaikh and S. Zeadally, "Energy harvesting in wireless sensor networks: A comprehensive survey," Renewable and Sustainable Energy Reviews, 2016, DOI: 10.1016/j.rser.2015.11.010
  6. M. Prauzek, J. Konecny, M. Borova, K. Janosova, J. Hlavica, and P. Musilek, "Energy harvesting sources, storage devices and systemtopologies for environmental wireless sensor networks: A review," mdpi.com, 2018, DOI: 10.3390/s18082446