과제정보
본 연구는 국토교통부 수소버스 안전성 평가기술 및 장비개발 사업의 연구비지원 (과제번호 #22HBST-C160329-03)에 의해 수행되었습니다.
참고문헌
- J. B. Kim, K.W. Jung, D.C. Choi, C. H. Kim, Y. Kim, "Study on Phased Array Ultrasonic Testing Technique During Repair of Carbon Steel Plate using CFRP Materials", Journal of the Korean Society for Nondestructive Testing, Vol. 41, No. 2, pp.126-132, Apr. 2021. https://doi.org/10.7779/JKSNT.2021.41.2.126
- J. R. Lee, H. Jeong, T. T. Chung, H. Shin, J. Park, "Damage Visualization of Filament Wound Composite Hydrogen Fuel Tank Using Ultrasonic Propagation Imager", Composites Research, Vol. 28, No. 4, pp.143-147, Apr. 2015. https://doi.org/10.7234/composres.2015.28.4.143
- D. Wang, B. Liao, C. Hao, A. Wen, J. Zheng, P. Jiang, C. Gu, P. Xu, Q. Huang, "Acoustic emission characteristics of used 70 MPa type IV hydrogen storage tanks during hydrostatic burst tests", International Journal of Hydrogen Energy, Vol. 46, No. 23, pp. 12605-12614, Mar. 2021. https://doi.org/10.1016/j.ijhydene.2020.12.177
- R. Gutkin, C. J. Green, S.Vangrattanachai, S. T. Pinho, P. Robinson, P. T. Curtis, ,"On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses", Mechanical Systems and Signal Processing, Vol. 25, No. 4, pp. 1393-1407, May.
- H.S. Roh, T.Q. Hua, R.K. Ahluwalia, "Optimization of carbon fiber usage in Type 4 hydrogen storage tanks for fuel cell automobiles", International journal of Hydrogen Energy , Vol.38, No. 29, pp.12795-12802 , Sep. 2013. https://doi.org/10.1016/j.ijhydene.2013.07.016
- D. Leh, P. Saffre, P. Francescato, R. Arrieux and S. Villalonga, "A progressive failure analysis of a 700-bar type IV hydrogen composite pressure vessel", International Journal of Hydrogen energy, Vol. 40, No. 38, pp 13206-13214, Oct. 2015. https://doi.org/10.1016/j.ijhydene.2015.05.061
- S. Y. Kim, H. S. Park, M. S. Kang, W. H. Lee, J. H. Choi, J. M. Koo, C. S. Seok, "Evaluation of Failure Strength of Woven CFRP Composite Plate Subject to Axial Load by Tan-Cheng Failure Criterion", Transactions of the KSME A, Vol. 33, No. 4, pp.360-365, Apr. 2009. https://doi.org/10.3795/KSME-A.2009.33.4.360
- J. Hu, F. Liu, Q. Duan, G. Cheng, Z. Zhang, "Failure analysis based on J-integral values: A case study of hydrogen blistering defect", Engineering Failure Analysis, Vol. 18, pp.924-932, Apr.
- Ming Zhang, Hong Lv, Huairong Kang, Wei Zhou, Cunman Zhang, "A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks", International Journal of Hydrogen Energy, Vol. 44, No. 47, pp. 25777-25799, Oct. 2019. https://doi.org/10.1016/j.ijhydene.2019.08.001
- American National Standards Institute and CSA Group, "ANSI HGV 2-2014 Compressed Hydrogen Gas Vehicle Fuel Containers", American National Standards Institute and CSA Group, Washington, DC, USA, 2014.
- The European Union, "Commission Regulation (EU) No 406/2010 of 26 April 2010 Implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on Type-Approval of Hydrogen Powered Motor Vehicles", The European Union, Brussels, Belgium, 2010.
- United Nations, "ECE/TRANS/180/Add.13 Global Technical Regulation on Hydrogen and Fuel Cell Vehicles", United Nations, New York, NY, USA, 2013.
- ASTM International, "ASTM D3039/D3039M-14 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials", West Conshohocken, PA, 2014.
- Altair Inc., "HyperWorks Manual", Version 2017, 2017.
- Dassault System Inc., "ABAQUS Manual", Version 2018, 2018.
- Kim J. H., C. J. Kim, C. S. Cha, Kim J. H., "Recalculation Research of Material properties for CFRP FEM Non-linear Analysis", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21, No. 4, pp.608-612, Aug. 2012. https://doi.org/10.7735/ksmte.2012.21.4.608
- Son B., "Failure Criteria of Composite Materials", Journal of Korean Society for Advanced Composite Structures, Vol. 2, No. 3, pp. 17-52, May. 2011.