DOI QR코드

DOI QR Code

Separation of Ni(II), Co(II), Mn(II), and Si(IV) from Synthetic Sulfate and Chloride Solutions by Ion Exchange

황산과 염산 합성용액에서 이온교환에 의한 니켈(II), 코발트(II), 망간(II) 및 실리케이트(IV)의 분리

  • Nguyen, Thi Thu Huong (Department of Advanced Materials Science & Engineering, Institute of Rare Metal, Mokpo National University) ;
  • Wen, Jiangxian (Department of Advanced Materials Science & Engineering, Institute of Rare Metal, Mokpo National University) ;
  • Lee, Man Seung (Department of Advanced Materials Science & Engineering, Institute of Rare Metal, Mokpo National University)
  • ;
  • ;
  • 이만승 (목포대학교 공과대학 신소재공학과)
  • Received : 2022.05.04
  • Accepted : 2022.06.07
  • Published : 2022.06.30

Abstract

Reduction smelting of spent lithium-ion batteries at high temperature produces metallic alloys. Following solvent extraction of the leaching solutions of these metallic alloys with either sulfuric or hydrochloric acid, the raffinate is found to contain Ni(II), Co(II), Mn(II), and Si(IV). In this study, two cationic exchange resins (Diphonix and P204) were employed to investigate the loading behavior of these ions from synthetic sulfate and chloride solutions. Experimental results showed that Ni(II), Co(II), and Mn(II) could be selectively loaded onto the Diphonix resin from a sulfate solution of pH 3.0. With a chloride solution of pH 6.0, Mn(II) was selectively loaded onto the P204 resin, leaving Ni(II) and Si(IV) in the effluent. Elution experiments with H2SO4 and/or HCl resulted in the complete recovery of metal ions from the loaded resin.

폐리튬이온전지를 고온에서 용융환원하면 금속혼합물을 얻을 수 있다. 금속혼합물을 황산이나 염산으로 침출한 다음 용매추출로 분리한 여액에는 니켈(II), 코발트(II), 망간(II)과 실리케이트(IV)가 함유되어 있다. 본 논문에서는 양이온교환수지인 Diphonix와 P204를 사용하여 황산과 염산 합성용액에 함유된 상기 이온들의 이온교환거동을 조사했다. 용액의 pH가 3인 황산용액에서 니켈(II), 코발트(II)와 망간(II)이 선택적으로 Diphonix에 흡착되었다. 용액의 pH가 6인 염산용액에서는 망간(II)이 P204수지에 선택적으로 흡착되어 분리가 가능했다. Diphonix와 P204에 흡착된 금속이온은 황산이나 염산용액으로 세출할 수 있었다.

Keywords

Acknowledgement

This work was supported by the Technology Innovation Program (Development of Material Component Technology) (Project number: 20011183) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).

References

  1. Dutta, D., Kumari, A., Panda, R., et al., 2018 : Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries, Separation and Purification Technology, 200, pp.327-334. https://doi.org/10.1016/j.seppur.2018.02.022
  2. Joo, S.H., Shin, D.J., Oh, C.H., et al., 2015 : Selective extraction of nickel from cobalt, manganese and lithium in pretreated leach liquors of ternary cathode material of spent lithium-ion batteries using synergism caused by Versatic 10 acid and LIX 84-I, Hydrometallurgy, 159, pp.65-74.
  3. Nayl, A.A., 2010 : Extraction and separation of Co(II) and Ni(II) from acidic sulfate solutions using Aliquat 336, Journal of Hazardous Materials, 173, pp.223-230. https://doi.org/10.1016/j.jhazmat.2009.08.072
  4. Tran, T.T, Moon, H.S., Lee, M.S., 2021 : Co, Ni, Cu, Fe, and Mn integrated recovery process via sulphuric acid leaching from spent lithium-ion batteries smelted reduction metallic alloys, Mineral Processing and Extractive Metallurgy Review.
  5. Tran, T.T, Moon, H.S., Lee, M.S., 2022 : Recovery of valuable metals from the hydrochloric leaching solution of reduction smelted metallic alloys from spent lithium-ion batteries smelted reduction metallic alloys, Chemical Technology and Biotechnology, 97, pp.1247-1258. https://doi.org/10.1002/jctb.7019
  6. Chiariza, R., Horwitz, E.P., Alexandrators, S.D., et al., 1997 : Diphonix® Resin: A Review of Its Properties and Applications, Separation Science and Technology, 32, pp.1-35. https://doi.org/10.1080/01496399708003184
  7. Sun, Q., Yang, L.M., Zhang, L., et al., 2018 : Extraction and separation of Fe(III) from heavy metal wastewater using P204 solvent impregnated resin, Rare Metals, 37, pp.894-903. https://doi.org/10.1007/s12598-016-0729-0
  8. Sik Ali, M. B., Hamrouni, B., Bouguecha, S., et al., 2004 : Silica removal using ion-exchange resins, Desalination, 167, pp.273-279. https://doi.org/10.1016/j.desal.2004.06.136
  9. Tran, T.T., Liu, Y., Lee, M. S., 2021 : Separation of cobalt, nickel, and copper metal using the mixture of HCl in ethylene glycol and Aliquat 336 in kerosene, Journal of Materials Research and Technology, 14, pp.2333-2344. https://doi.org/10.1016/j.jmrt.2021.07.139