DOI QR코드

DOI QR Code

Optimization of safety factor by adaptive simulated annealing of composite laminate at low-velocity impact

  • Sidamar, Lamsadfa (Laboratory of Materials and Energy, University of Tamanghasset) ;
  • Said, Zirmi (Laboratory of Mechanics Modelisation and Experiments, University of Bechar) ;
  • Said, Mamouri (Laboratory of Mechanics Modelisation and Experiments, University of Bechar)
  • Received : 2021.09.25
  • Accepted : 2022.02.02
  • Published : 2022.08.25

Abstract

Laminated composite plates are utilized extensively in different fields of construction and industry thanks to their advantages such as high stiffness-to-weight ratio. Additionally, they are characterized by their directional properties that permit the designer to optimize their stiffness for specific applications. This paper presents a numerical analysis and optimization study of plates made of composite subjected to low velocity impact. The main aim is to identify the optimum fiber orientations of the composite plates that resist low velocity impact load. First, a three-dimensional finite element model is built using LS DYNA computer software package to perform the impact analyses. The composite plate has been modeled using solid elements. The failure criteria of Tsai-Wu's criterion have been used to control the strength of the composite material. A good agreement has been found between the predicted numerical results and experimental results in the literature which validate the finite element model. Then, an Adaptive Simulated Annealing (ASA) has been used to optimize the response of impacted composite laminate where its objective is to maximize the safety factor by varying the ply angles. The results show that the ASA is robust in the sense that it is capable of predicting the best optimal designs.

Keywords

Acknowledgement

We would like to thank the Laboratory of Materials and Energy at the University of Tamanghasset, and the Laboratory of Mechanics Modelisation and Experiments at the University of Bechar, for their support and continuous helpful guidance whenever needed.

References

  1. Abderezak, R., Tahar, H.D., Rabia, B. and Tounsi, A. (2021), "Mechanical behavior of RC cantilever beams strengthened with FRP laminate plate", Couple. Syst. Mech., 6(3), 169-190. https://doi.org/10.12989/csm.2021.6.3.169.
  2. Akbulut, M. and Sonmez, F.O. (2011), "Design optimization of laminated composites using a new variant of simulated annealing", Comput. Struct., 89(17-18), 1712-1724. https://doi.org/10.1016/j.compstruc.2011.04.007.
  3. Akbulut, M., Sarac, A. and Ertas, A.H. (2020), "An investigation of non-linear optimization methods on composite structures under vibration and buckling loads", Adv. Comput. Des., 5(3), 209-231. https://doi.org/10.12989/acd.2020.5.3.209.
  4. Akcair, M., Savran, M., Aydin, L., Ayakdas, O., Ozturk, S. and Kucukdogan, N. (2019), "Optimum design of anti-buckling behavior of graphite/epoxy laminated composites by differential evolution and simulated annealing method", Res. Eng. Struct. Mater., 5(2), 175-188. https://doi.org/10.17515/resm2019.66is0909.
  5. Alcantar, V., Ledesma, S., Aceves, S.M., Ledesma, E. and Saldana, A. (2017), "Optimization of type III pressure vessels using genetic algorithm and simulated annealing", Int. J. Hydrogen Energy, 42(31), 20125-20132. https://doi.org/10.1016/j.ijhydene.2017.06.146.
  6. Almeida Jr, J.H.S., Ribeiro, M.L., Tita, V. and Amico, S.C. (2017), "Stacking sequence optimization in composite tubes under internal pressure based on genetic algorithm accounting for progressive damage", Compos. Struct., 178, 20-26. https://doi.org/10.1016/j.compstruct.2017.07.054.
  7. Belakhdar, K. and Tounsi, A. (2017), "Finite element analysis of initially damaged beams repaired with FRP plates", Compos. Struct., 134, 429-439. https://doi.org/10.1016/j.compstruct.2015.07.124.
  8. Borazjani, S. and Belingardi, G. (2017), "Lightweight design: Detailed comparison of roof panel solutions at crash and stiffness analyses", Int. J. Crashworthin., 22(1), 49-62. https://doi.org/10.1080/13588265.2016.1215589.
  9. Cheng, X., Zhao, W., Liu, S., Xu, Y. and Bao, J. (2014), "Damage of scarf-repaired composite laminates subjected to low-velocity impacts", Steel Compos. Struct., 17(2), 199-213. https://doi.org/10.12989/scs.2014.17.2.199.
  10. Clegg, H.M., Dell, G. and Partridge, I.K. (2019), "Creating damage tolerant intersections in composite structures using tufting and 3D woven connectors", Adv. Aircraft Apacecraft Sci., 6(2), 145. https://doi.org/10.12989/aas.2019.6.2.145.
  11. Daouadji, T.H. (2017), "Analytical and numerical modeling of interfacial stresses in beams bonded with a thin plate", Adv. Comput. Des., 2(1), 57-69. https://doi.org/10.12989/acd.2017.2.1.057.
  12. Ghosh, A. and Chakravorty, D. (2018), "Nonlinear first ply failure analysis of composite skewed hypar shells using FEM", Struct. Eng. Mech., 68(1), 81-94. https://doi.org/10.12989/sem.2018.68.1.081.
  13. Ilyas, M. (2010), "Damage modeling of carbon epoxy laminated composites submitted to impact loading", Doctoral Dissertation.
  14. Karakaya, S. and Soykasap, O. (2011), "Natural frequency and buckling optimization of laminated hybrid composite plates using genetic algorithm and simulated annealing", Struct. Multidisc. Optim., 43(1), 61-72. https://doi.org/10.1007/s00158-010-0538-2.
  15. Lachaud, F., Espinosa, C., Michel, L., Rahme, P. and Piquet, R. (2015), "Modelling strategies for predicting the residual strength of impacted composite aircraft fuselages", Appl. Compos. Mater., 22(6), 599-621. https://doi.org/10.1007/s10443-014-9427-y.
  16. Lavrencica, M. and Brank, B. (2018), "Failure analysis of ribbed cross-laminated timber plates", Couple. Syst. Mech., 7(1), 79-93. https://doi.org/10.12989/csm.2018.7.1.079.
  17. Liu, H., Falzon, B.G. and Tan, W. (2018), "Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates", Compos. Part B: Eng., 136, 101-118. https://doi.org/10.1016/j.compositesb.2017.10.016.
  18. Maamar, D.B. and Ramdane, Z. (2016), "Characterization of the mechanical behaviour of carbon fiber composite laminate under low velocity impact", Periodica Polytechnica Mech. Eng., 60(3), 142-151. https://doi.org/10.3311/PPme.8633.
  19. Maamar, D.B. and Zenasni, R. (2018), "Optimization of safety factor by genetic algorithm of circular notched carbon/epoxy laminate at low velocity impact", Periodica Polytechnica Mech. Eng., 62(3), 218-225. https://doi.org/10.3311/PPme.12041.
  20. Mou, H.L., Zou, T.C., Feng, Z.Y. and Xie, J.I.A.N.G. (2016), "Crashworthiness analysis and evaluation of fuselage section with sub-floor composite sinusoidal specimens", Lat. Am. J. Solid. Struct., 13(6), 1186-1202. https://doi.org/10.1590/1679-78252446.
  21. Panigrahi, S.K. and Das, K. (2016), "Ballistic impact analyses of triangular corrugated plates filled with foam core", Adv. Comput. Des., 1(2), 139-154. https://doi.org/10.12989/acd.2016.1.2.139.
  22. Polatov, A.M., Khaldjigitov, A.A. and Ikramov, A.M. (2020), "Algorithm of solving the problem of small elastoplastic deformation of fiber composites by FEM", Adv. Comput. Des., 5(3), 305-321. https://doi.org/10.12989/acd.2020.5.3.305.
  23. Rizov, V.I. (2017), "Non-linear analysis of delamination fracture in functionally graded beams", Couple. Syst. Mech., 6(1), 97-111. https://doi.org/10.12989/csm.2017.6.1.097.
  24. Santoro, J.F. and Kripka, M. (2020), "Minimizing environmental impact from optimized sizing of reinforced concrete elements", Comput. Concrete, 25(2), 111-118. https://doi.org/10.12989/cac.2020.25.2.111.
  25. Shyamala, P., Mondal, S. and Chakraborty, S. (2018), "Numerical and experimental investigation for damage detection in FRP composite plates using support vector machine algorithm", Struct. Monit. Mainten., 5(2), 243-260. https://doi.org/10.12989/smm.2018.5.2.243.
  26. Yong, M., Falzon, B.G. and Iannucci, L. (2008), "On the application of genetic algorithms for optimizing composites against impact loading", Int. J. Impact Eng., 35(11), 1293-1302. https://doi.org/10.1016/j.ijimpeng.2007.10.004.
  27. Zhao, W., Guo, Q., Dou, X., Zhou, Y. and Ye, Y. (2018), "Impact response of steel-concrete composite panels: Experiments and FE analyses", Steel Compos. Struct., 26(3), 255-263. https://doi.org/10.12989/scs.2018.26.3.255.