Acknowledgement
이 논문은 동아대학교 교내연구비 지원에 의하여 연구되었다.
References
- J. K. Yeom and J. H. Yoon, "Study of behavior characteristics of emulsified fuels with evaporative field", Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 3, 2015, pp. 237-243, doi: https://doi.org/10.3795/KSME-B.2015.39.3.237.
- J. K. Yeom and J. H. Yoon, "Basic study of spray-behavior characteristics of emulsified fuel", Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 9, 2014, pp. 763-771, doi: https://doi.org/10.3795/KSME-B.2014.38.9.763.
- M. Huo, S. Lin, H. Liu, and C. F. Lee, "Study on the spray an d combustion characteristics of water-emulsified diese l", Fuel, Vol. 123, 2014, pp. 218-229, doi: https://doi.org/10.1016/j.fuel.2013.12.035.
- S. Y. No, "Application of bio-oils from lignocellulosic biomass to transportation, heat and power generation-a review", Renew Sustain Energy Rev., Vol. 40, 2014, pp. 1108-1125, doi: https://doi.org/10.1016/j.rser.2014.07.127.
- J. K. Yeom, S. H. Jung, and J. H. Yoon, "An experimental study on the application of oxygenated fuel to diesel engines", Fuel, Vol. 248, 2019, pp. 262-277, doi: https://doi.org/10.1016/j.fuel.2018.12.131.
- H. W. Lee, D. H. Oh, and Y. J. Seo, "Prediction of changes in filling time and temperature of hydrogen tank according t o SOC of hydrogen", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 4, 2020, pp. 345-350, doi: https://doi.org/10.7316/KHNES.2020.31.4.345.
- B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equations of state", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 5, 2019, pp. 385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385.
- Ministry of Economy and Finance, "2050 carbon neutral strategy of the republic of Korea", Ministry of Economy and Finance, 2020. Retrieved from https://www.korea.kr/archive/expDocView.do?docId=39241.
- M. A. Bagherian and K. Mehranzamir, "A comprehensive review on renewable energy integration for combined heat and power production", Energy Conversion and Management, Vol. 224, 2020, pp. 113454, doi: https://doi.org/10.1016/j.enconman.2020.113454.
- M. Mahmoud, M. Ramadan, A. G. Olabi, K. Pullen, and S. Naher, "A review of mechanical energy storage systems combined with wind and solar applications", Energy Conversion and Management, Vol. 210, 2020, pp. 112670, doi: https://doi.org/10.1016/j.enconman.2020.112670.
- M. Li, Y. Bai, C. Zhang, Y. Song, S. Jiang, D. Grouset, and M. Zhang, "Review on the research of hydrogen storage system fast refueling in fuel cell vehicle", Int. J. Hydrog. Energy, Vol. 44, No. 21, 2019, pp. 10677-10693, doi: https://doi.org/10.1016/j.ijhydene.2019.02.208.
- J. Zheng, J. Guo, J. Yang, Y. Zhao, L. Zhao, X. Pan, J. Ma, and L. Zhang, "Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling", Int. J. Hydrog. Energy, Vol. 38, No. 25, 2013, pp. 10956-10962, doi: https://doi.org/10.1016/j.ijhydene.2013.02.053.
- J. Guo, J. Yang, Y. Zhao, X. Pan, L. Zhang, L. Zhao, and J. Zheng, "Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test", Int. J. Hydrog. Energy, Vol. 39, No. 25, 2014, pp. 13926-13934, doi: https://doi.org/10.1016/j.ijhydene.2014.03.097.
- N. de Muguel, R. O. Cebolla, B. Acosta, P. Moretto, F. Harskamp, and C. Bonato, "Compressed hydrogen tanks for on-board application: thermal behaviour during cycling", Int. J. Hydrog. Energy, Vol. 40, No. 19, 2015, pp. 6449-6458, doi: https://doi.org/10.1016/j.ijhydene.2015.03.035.
- C. P. Fowler, A. C. Orifici, and C. H. Wang, "A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage", Int. J. Hydrog. Energy, Vol. 41, No. 47, 2016, pp. 220647-22089, doi: https://doi.org/10.1016/j.ijhydene.2016.10.039.
- J. Zheng, X. Liu, P. Xu, P. Liu, Y. Zhao, and J. Yang, "Development of high pressure gaseous hydrogen storage technologies", Int. J. Hydrog. Energy, Vol. 37, No. 1, 2012, pp. 1048-1057, doi: https://doi.org/10.1016/j.ijhydene.2011.02.125.
- S. J. Ko, B. W. Kim, J. H. Park, G. H. Kang, and S. K. Lee, "Analysis of quenching performance of in-line flame arrester by analyzing temperature characteristics of body", Journal of the KNST, Vol. 3, No. 1, 2020, pp. 8-13, doi: https://doi.org/10.31818/JKNST.2020.03.3.1.8.
- Y. Okawa, S. Asano, C. Youn, S. Ikeda, and T. Kagawa, "Experimental research on a newly developed detonation flame arrester", SICE Annual Conference, 2008, pp. 1088-1091, doi: https://doi.org/10.1109/SICE.2008.4654819.
- H. I. Joo, K. Duncan, and G. Ciccarelli, "Flame-quenching performance of ceramic foam", Combustion Science and Technology, Vol. 178, No. 10-11, 2006, pp. 1755-1769, doi: https://doi.org/10.1080/00102200600788692.
- M. H. Mat Kiah and R. M. Kasmani, "Experimental study on premixed flame acceleration in closed pipe", Jurnal Teknologi, Vol. 62, No. 1, 2013, pp. 45-51, doi: https://doi.org/10.11113/jt.v62.1322.
- S. Z. sulaiman, R. M. Kasmani, and A. Mustafa, "Experimental study on the effect of curved tube of premixed hydrogen-air explosion", Journal of Engineering Science and Technology, Special Issue on SOMCHE 2014 & RSCE 2014 Conference, pp. 50-60, 2015.
- ANSYS, "ANSYS FLUENT theory guide", ANSYS, 2020. Retrieved from http://www.pmt.usp.br/academic/martoran/notasmodelosgrad/ANSYS%Fluent%Theory%Guide%15.pdf.
- R. Nowak, "Estimation of viscous and inertial resistance coefficients for various heat sink configurations", Procedia Engineering, Vol. 157, 2016, pp. 122-130, doi: https://doi.org/10.1016/j.proeng.2016.08.347.
- J. I. Lim, J. H. Park, J. H. Kim, and D. J. Kim, "Flow analysis of sea-water strainer", Korean Society for Fluid Machinery, 2009, pp. 333-334. Retrieved from https://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE01356715.