Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

An investigation into the thermo-elasto-hydrodynamic effect of notched mechanical seals

  • Meng, Xiangkai (Institute of Process Equipment and Control Engineering, Zhejiang University of Technology) ;
  • Qiu, Yujie (Institute of Process Equipment and Control Engineering, Zhejiang University of Technology) ;
  • Ma, Yi (Institute of Process Equipment and Control Engineering, Zhejiang University of Technology) ;
  • Peng, Xudong (Institute of Process Equipment and Control Engineering, Zhejiang University of Technology)
  • Received : 2021.08.09
  • Accepted : 2021.12.24
  • Published : 2022.06.25
Download PDF
⟨ Previous Next ⟩

Abstract

A 3D thermo-elasto-hydrodynamic model is developed to analyze the sealing performance of a notched mechanical seal applied in the reactor coolant pump. In the model, the generalized Reynolds equation, the energy equation coupled with notch heat balance equation, the heat conduction equations, and the deformation equations of the sealing rings are iteratively solved by the finite element method. The film pressure and temperature distribution are obtained, and the deformation of the sealing rings is revealed to study the mechanism of the notched mechanical seals. A parameterized study is conducted to analyze the sealing performance under different operating conditions. As a comparison, the sealing performance of non-notched seals is also studied. The results show that the hydrostatic effect is dominant in the load-carrying capacity of the fluid film due to the radial mechanical and thermal deformations. The notch can cool the fluid film and influence the thermal deformation of seal rings. The sealing performance is sensitive to the pressure difference, ambient temperature, and rotational speed. It is suggested to set the notches on the softer sealing rings to acquire the greater hydrodynamic effect. Compared with the non-notched, the notched end face holds a better lubrication performance, especially under lower rotational speed.

Keywords

Acknowledgement

The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: National Key R&D Program of China (No. 2018YFB2000800) and the National Natural Science Foundation of China (No. 51775505).

References

  1. E. Mayer, Performance of rotating high duty nuclear seals, Lubr. Eng. 45 (1989) 275-286.
  2. T. Fuse, T. Shimizu, K. Nishiyama, Development of high reliable mechanical seal for nuclear power plant, in: Proceedings of the 17th International Conference on Fluid Sealing, York, UK, April 8-10 2003, 2003.
  3. J.P. Netzel, Observations of thermoelastic instability in mechanical face seals, Wear 59 (1980) 135-148. https://doi.org/10.1016/0043-1648(80)90275-6
  4. W.E. Key, R.F. Salant, P. Payvar, S. Gopalakrishnan, G. Vaghasia, Analysis of a mechanical seal with deep hydropads, Tribol. Trans. 32 (1989) 481-489. https://doi.org/10.1080/10402008908981916
  5. V. Person, B. Tournerie, J. Frene, A numerical study of the stable dynamic behavior of radial face seals with grooved faces, J. Tribol. 119 (1997) 507-513. https://doi.org/10.1115/1.2833527
  6. M. Rahimi Takami, M. Barzegar Gerdroodbary, D.D. Ganji, Thermal analysis of mechanical face seal using analytical approach, Therm. Sci. Eng. Prog. 5 (2018) 60-68. https://doi.org/10.1016/j.tsep.2017.10.023
  7. M. Mosavat, R. Moradi, M. Rahimi Takami, M. Barzegar Gerdroodbary, D.D. Ganji, Heat transfer study of mechanical face seal and fin by analytical method, Eng. Sci. Technol. 21 (2018) 380-388.
  8. C.-H. Li, Thermal deformation in a mechanical face seal, A S L E Trans 19 (1976) 146-152. https://doi.org/10.1080/05698197608982788
  9. T.G. Doust, A. Parmar, An experimental and theoretical study of pressure and thermal distortions in a mechanical seal, A S L E Trans 29 (1986) 151-159. https://doi.org/10.1080/05698198608981672
  10. S. Blasiak, J.E. Takosoglu, P.A. Laski, Heat transfer and thermal deformations in non-contacting face seals, J. Therm. Sci. Technol. 9 (2014) JTST0011. JTST0011. https://doi.org/10.1299/jtst.2014jtst0011
  11. N. Brunetiere, B. Tournerie, J. Frene, TEHD lubrication of mechanical face seals in stable tracking mode: Part 1-Numerical Model and Experiments, J. Tribol. 125 (2003) 608-616. https://doi.org/10.1115/1.1510885
  12. N. Brunetiere, B. Tournerie, J. Frene, TEHD lubrication of mechanical face seals in stable tracking mode: Part 2-Parametric Study, J. Tribol. 125 (2003) 617-627. https://doi.org/10.1115/1.1510886
  13. S. Thomas, N. Brunetiere, B. Tournerie, Thermoelastohydrodynamic behavior of mechanical gas face seals operating at high pressure, J. Tribol. 129 (2007) 841-850. https://doi.org/10.1115/1.2768086
  14. P. Payvar, R.F. Salant, A computational method for cavitation in a wavy mechanical seal, J. Tribol. 114 (1992) 199-204. https://doi.org/10.1115/1.2920861
  15. Y. Liu, W. Liu, Y.J. Li, X.F. Liu, Y.M. Wang, Mechanism of a wavy-tilt-dam mechanical seal under different working conditions, Tribol. Int. 90 (2015) 43-54. https://doi.org/10.1016/j.triboint.2015.03.020
  16. J. Cochain, N. Brunetiere, A. Parry, H. Denoix, A. Maoui, Experimental and numerical study of wavy mechanical face seals operating under pressure inversions, Proc. Inst. Mech. Eng., Part J: J Eng Tribol. 234 (2019) 247-260. https://doi.org/10.1177/1350650119862696
  17. X. Yang, X.D. Peng, X.K. Meng, J.B. Jiang, Y.M. Wang, Thermo-elasto-hydrodynamic analysis of triangular textured mechanical face seals, J. Zhejiang Univ. - Sci. A. 20 (2019) 864-881. https://doi.org/10.1631/jzus.A1900163
  18. W. Liu, Y. Liu, J.J. Zhai, Y.M. Wang, Three-dimensional floweheat coupling model of a wavy-tilt-dam mechanical seal, Tribol. Trans. 56 (2013) 1146-1155. https://doi.org/10.1080/10402004.2013.812758
  19. A. Djamai, N. Brunetiere, B. Tournerie, Numerical modeling of thermohy-drodynamic mechanical face seals, Tribol. Trans. 53 (2010) 414-425. https://doi.org/10.1080/10402000903350612
  20. X.K. Meng, W.J. Zhao, M.X. Shen, X.D. Peng, Thermohy-drodynamic analysis on herringbone-grooved mechanical face seals with a quasi-3D model, Proc. Inst. Mech. Eng., Part J: J Eng Tribol. 232 (2018) 1402-1414. https://doi.org/10.1177/1350650117752952
  21. S.Z. Wen, P. Huang, Principles of Tribology, fourth ed., Tsinghua University Press, Beijing, 2012 (in Chinese).
  22. X.K. Meng, S.X. Bai, X.D. Peng, An efficient adaptive finite element method algorithm with mass conservation for analysis of liquid face seals, J. Zhejiang Univ. - Sci. 15 (2014) 172-184. https://doi.org/10.1631/jzus.A1300328
  23. F. Stefani, A. Rebora, Steadily loaded journal bearings: quasi-3D masseenergy-conserving analysis, Tribol. Int. 42 (2009) 448-460. https://doi.org/10.1016/j.triboint.2008.08.006
  24. Y.J. Qiu, X.K. Meng, Y.Y. Liang, X.D. Peng, Thermal mixing effect and heat transfer in U-shaped notch on the mechanical seal face, Proc. Inst. Mech. Eng., Part J: J Eng Tribol. 235 (2020) 1924-1936.
  25. K.M. Becker, Measurements of convective heat transfer from a horizontal cylinder rotating in a tank of water, Int. J. Heat Mass Tran. 6 (1963) 1053-1062. https://doi.org/10.1016/0017-9310(63)90006-1
  26. K. Ayadi, N. Brunetiere, B. Tournerie, A. Maoui, Experimental thermal analysis of a mechanical face seal, J. Therm. Sci. Eng. Appl. 8 (2016), 031011, 1-7. https://doi.org/10.1115/1.4033212
  27. B. Ruan, R.F. Salant, I. Green, A mixed lubrication model of liquid/gas mechanical face seals, Tribol. Trans. 40 (1997) 647-657. https://doi.org/10.1080/10402009708983705
  28. E. Mayer, Thermohydrodynamic in mechanical seals, in: Proceedings of the 4th International Conference on Fluid Sealing, Philadelphia, USA, May 5 1969.