DOI QR코드

DOI QR Code

Research on the tightening strategy of bolted flange for contact stiffness of joint surface

  • Zuo, Weiliang (Key Laboratory of CNC Equipment Reliability, Ministry of Education) ;
  • Liu, Zhifeng (Key Laboratory of CNC Equipment Reliability, Ministry of Education) ;
  • Zhao, Yongsheng (Institute of Advanced Manufacturing and Intelligent Technology, Beijing University of Technology) ;
  • Niu, Nana (Institute of Advanced Manufacturing and Intelligent Technology, Beijing University of Technology) ;
  • Zheng, Mingpo (Institute of Advanced Manufacturing and Intelligent Technology, Beijing University of Technology)
  • Received : 2021.10.20
  • Accepted : 2022.05.07
  • Published : 2022.08.10

Abstract

During bolted flange assembly, the contact stiffness of some areas of the joint surface may be low due to the elastic interaction. In order to improve the contact stiffness at the lowest position of bolted flange, the correlation model between the initial bolt pre-tightening force and the contact stiffness of bolted flange is established in this paper. According to the stress distribution model of a single bolt, an assumption of uniform local contact stiffness of bolted flange is made. Moreover, the joint surface is divided into the compressive stress region and the elastic interaction region. Based on the fractal contact theory, the relationship model of contact stiffness and contact force of the joint surface is proposed. Considering the elastic interaction coefficient method, the correlation model of the initial bolt pre-tightening force and the contact stiffness of bolted flange is established. This model can be employed to reverse determine the tightening strategy of the bolt group according to working conditions. As a result, this provides a new idea for the digital design of tightening strategy of bolt group for contact stiffness of bolted flange. The tightening strategy of the bolted flange is optimized by using the correlation model of initial bolt pre-tightening force and the contact stiffness of bolted flange. After optimization, the average contact stiffness of the joint surface increased by 5%, and the minimum contact stiffness increased by 6%.

Keywords

Acknowledgement

The research described in this paper was financially supported by the National Natural Science Foundation of China (grant no. 51975019 and 52075012), and National Science and Technology Major Project (Key Processing Equipment for Large and Medium CNC in the Machine Tool Industry, grant no. TC210H035-009).

References

  1. Abid, M. and Hussain, S. (2008), "Bolt preload scatter and relaxation behaviour during tightening a 4 in-900# flange joint with spiral wound gasket", ARCHIVE Proc. Inst. Mech. Eng. Part E J. Proc. Mech. Eng., 222(E2), 123-134. https://doi.org/10.1243/09544089JPME160.
  2. Belardi, V.G., Fanelli, P. and Vivio, F. (2018), "A novel composite bolted joint element: Application to a single-bolted joint", Procedia Struct. Integ., 12, 281-295. https://doi.org/10.1016/j.prostr.2018.11.087.
  3. Belardi, V.G., Fanelli, P. and Vivio, F. (2021), "Theoretical definition of a new custom finite element for structural modeling of composite bolted joints", Compos. Struct., 258, 113199. https://doi.org/10.1016/j.compstruct.2020.113199.
  4. Bibel, G. and Ezell, R. (1996), "Bolted flange assembly: preliminary elastic interaction data and improved bolt-up procedures", Bull.-Weld. Res. Council, 408(408), 1-27.
  5. Bibel, G.D. (1992), "Experimental and analytical study of elastic interaction in a pipe flange", The International Conference on Pressure Vessel Technology, Dusseldorf, Germany.
  6. Bibel, G.D. and Ezell, R.M. (1992), "An improved flange bolt-up procedure using experimentally determined elastic interaction coefficients", J. Press. Ves. Technol., 114(4), 439-443. https://doi.org/10.1115/1.2929252.
  7. Bickford, J.H. (2008), Introduction to the Design and Behavior of Bolted Joints, CRC Press, Boca Raton, FL.
  8. Cai, L., Yang, C., Zhao, Y. et al. (2016), "Dynamics model of bolted joint based on uneven pressure distribution of the surface", J. Beijing Univ. Technol., 42(11), 1609-1616. https://doi.org/10.11936/bjutxb2015090071.
  9. Cheraghi, S.H. (2008), "Effect of variations in the riveting process on the quality of riveted joins", Int. J. Adv. Manuf. Technol., 39(11/12), 1144-1155. https://doi.org/10.1007/s00170-007-1291-6.
  10. Fukuoka, T. and Takaki, T. (2001), "Finite element simulation of bolt-up process of pipe flange connections", J. Press. Ves. Technol., 123(3), 282-287. https://doi.org/10.1115/1.1358842.
  11. Johnson, R.E. (1990), "Resolution of generic safety issue 29: Bolting degradation or failure in nuclear power plants, division of safety issues resolution", Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC.
  12. Kogut, L. and Etsion, I. (2004), "A static friction model for elastic-plastic contacting rough surfaces", J. Tribology, 126(1), 34-40. https://doi.org/10.1115/1.1609488.
  13. Lee, S.W. and Lee, D.G. (2007), "Torque transmission capability of composite-metal interference fit joints", Compos. Struct., 78(4), 584-595. https://doi.org/10.1016/j.compstruct.2005.11.021.
  14. Liu, F., Yao, W., Shi, X., Zhao, L. and Zhang, J. (2020), "Bearing failure optimization of composite double-lap bolted joints based on three-step strategy marked by feasible region reducing and model decoupling", Comput. Mater. Continua, 62(2), 977-999. https://doi.org/10.32604/cmc.2020.07184
  15. Majumdar, A. and Bhushan, B. (1991), "Fractal model of elastic-plastic contact between rough surfaces", J. Tribology, 113(1), 1-11. https://doi.org/10.1115/1.2920588.
  16. Nassar, S.A. and Alkelani, A.A. (2006), "Clamp load loss due to elastic interaction and gasket creep relaxation in bolted joints", J. Press. Ves. Technol., 128(3), 394-401. https://doi.org/10.1115/1.2218343.
  17. Nassar, S.A., Wu, Z.J. and Yang, X.J. (2010), "Achieving uniform clamp load in gasketed bolted joints using a nonlinear finite element model", J. Press. Ves. Technol., 132(3), 031205. https://doi.org/10.1115/1.4001040.
  18. Nickell, R.E. (1988), "Degradation and failure of bolting in nuclear power plants: Volume 1 (No. EPRI-NP-5769-Vol. 1)", Applied Science and Technology, Poway, CA, USA.
  19. Ren, Y. and Beards, C.F. (1995), "Identification of joint properties of a structure using FRF data", J. Sound Vib., 186(4), 567-587. https://doi.org/10.1006/jsvi.1995.0469.
  20. Shan, M., Zhao, L., Liu, F., Qi, D. and Zhang, J. (2020), "Revealing the competitive fatigue failure behaviour of CFRP-aluminum two-bolt, double-lap joints", Compos. Struct., 244, 112166. https://doi.org/10.1016/j.compstruct.2020.112166.
  21. Tian, H.L. and Li, B. (2011), "A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools", Int. J. Mach Tool Manuf., 51(3), 239-249. https://doi.org/10.1016/j.ijmachtools.2010.11.004.
  22. Wang, M., Wang, D. and Zheng, G. (2011), "Joint dynamic properties identification with partially measured frequency response function", Mech. Syst. Signal Pr., 27, 499-512. https://doi.org/10.1016/j.ymssp.2011.09.024.
  23. Weber, E.M. and Bibel, G.D. (1994), "Flange bolt-up simulation using 3-D finite element modeling", ASME Publ.-PVP, 274, 63-63. https://doi.org/10.1115/1.802442.
  24. You, J.M. and Chen, T.N. (2010), "A static friction model for the contact of fractal surfaces", Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 224(5), 513-518. https://doi.org/10.1243/13506501JET760.
  25. Zhao, Y., Xu, J., Cai, L., Shi, W. and Liu, Z. (2017), "Stiffness and damping model of bolted joint based on the modified three-dimensional fractal topography", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 231(2), 279-293. https://doi.org/10.1177/0954406216631577.
  26. Zhao, Y., Xu, J., Cai, L., Shi, W., Liu, Z. and Cheng, Q. (2017), "Contact characteristic analysis of spindle-toolholder joint at high speeds based on the fractal model", Proc. Inst. Mech. Eng., Part E: J. Proc. Mech. Eng., 231(5), 1025-1036. https://doi.org/10.1177/0954408916652648.
  27. Zhu, L., Bouzid, A.H. and Hong, J. (2018), "Analytical evaluation of elastic interaction in bolted flange joints", Int. J. Press. Ves. Pip., 165, 176-184. https://doi.org/10.1016/j.ijpvp.2018.06.012.