DOI QR코드

DOI QR Code

원단 불량 검사기의 자동 마킹 시스템 개발

Development of an Automatic Marking System for Fabric Inspection Machine

  • 김재연 (한국섬유기계융합연구원) ;
  • 이재용 (한국섬유기계융합연구원)
  • Kim, Jae-Yeon (Korea Textile Machinery Convergence Research Institute) ;
  • Lee, Jae-Yong (Korea Textile Machinery Convergence Research Institute)
  • 투고 : 2022.04.10
  • 심사 : 2022.04.24
  • 발행 : 2022.06.30

초록

In this study, an automatic marking system for fabric inspection machines was developed. The main objectives of the study were to promote intelligence and automation for the inspection process, as well as to increase textile industrial productivity. Generally, when a worker manually inspects and marks a fabric, human error and reduced efficiency are unavoidable. To overcome these problems, we developed an automatic marking system that uses robots. This system incorporates a vision camera to automatically recognize defects, and an optical fiber sensor to detect the side of the fabric. To verify the performance, the control system sends a command directly to the robot to mark the fabric. Finally, the actual production confirmed that the proposed system could perform the desired motion.

키워드

과제정보

This research was supported by the Ministry of Trade, Industry and Energy. (No.20014861)

참고문헌

  1. Kwak, D. K., "A Study on Development of Disaster Prevention Automation System on IT using One-chip Type PLC," The Transactions of the Korean Institute of Power Electronics, Vol. 16, No. 2, pp. 97-104, 2011. https://doi.org/10.6113/TKPE.2011.16.2.97
  2. Kim, J. Y., Yoon, H. J., Lee, J. Y., "Development of an embedded PLC Control system for textile machinery systems," 2021 KSMPE Autumn Conference, pp. 404-404, 2021.
  3. Kumar, A., "Computer-Vision-Based Fabric Defect Detection: A Survey," in IEEE Transactions on Industrial Electronics, Vol. 55, No. 1, pp. 348-363, 2008. https://doi.org/10.1109/TIE.1930.896476
  4. Cho, C. S, Chung, B. M., Park, M. J., "Development of real-time vision-based fabric inspection system," in IEEE Transactions on Industrial Electronics, Vol. 52, No. 4, pp. 1073-1079, 2005. https://doi.org/10.1109/TIE.2005.851648
  5. Dessaint, L. -A., Saad, M., Hebert, B., Al-Haddad, K., "An adaptive controller for a direct-drive SCARA robot," in IEEE Transactions on Industrial Electronics, Vol. 39, No. 2, pp. 105-111, 1992.
  6. Wang, H., Ding, G., Shun, Y., Jiang, P. and Yan, G., "Robot auto-marking and auto-cutting of shipbuilding panels based on a compensation algorithm," Industrial Robot, Vol. 28 No. 5, pp. 425-434, 2001. https://doi.org/10.1108/01439910110401925
  7. Im, S. B., Jeong, S. H., "A study on the implementation of closed-loop system using the stepper motor back-EMF," Journal of the Korea Safety Management & Science, Vol. 17, No. 3, pp. 363-370, 2015. https://doi.org/10.12812/KSMS.2015.17.3.363
  8. Krishnamurthy, P., Khorrami, F., "Robust adaptive voltage-fed permanent magnet step motor control without current measurements," in IEEE Transactions on Control Systems Technology, Vol. 11, No. 3, pp. 415-425, 2003. https://doi.org/10.1109/TCST.2003.810397
  9. D'Angelo, L. T., Weber, S., Honda, Y., Thiel, T., Narbonneau, F., Luth, T. C., "A system for respiratory motion detection using optical fibers embedded into textiles," 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 3694-3697, 2008.