Acknowledgement
본 연구는 2022년 국토교통과학기술부의 지원으로 수행되었습니다. 이에 감사드립니다(22NANO-B156177-03). 본 논문은 2021 CONVENTION 논문을 수정·보완하여 작성되었습니다.
References
- ACI (American Concrete Institute) Committee (2003). "Guide for structural lightweight-aggregate concrete (ACI 213R)." ACI Symposium Publication, Vol. 213.
- ACI (American Concrete Institute) Committee (2005). "High-strength concrete (ACI 363R)." ACI Symposium Publication, Vol. 228, pp. 79-70.
- ASTM, A. (2008a). C230, Specification for flow table for use in tests of hydraulic cement. Annual Book of ASTM Standards 401.
- ASTM, A. C230. (2008b). Specification for flow table for use in tests of hydraulic cement. Annual Book of ASTM Standards, 401.
- Blanco, F., Garcia, P., Mateos, P. and Ayala, J. (2000). "Characteristics and properties of lightweight concrete manufactured with cenospheres." Cement and Concrete Research, Vol. 30, No. 11, pp. 1715-1722. https://doi.org/10.1016/S0008-8846(00)00357-4
- Brooks, A. L., Zhou, H. and Hanna, D. (2018). "Comparative study of the mechanical and thermal properties of lightweight cementitious composites." Construction and Building Materials, Vol. 159, pp. 316-328. https://doi.org/10.1016/j.conbuildmat.2017.10.102
- Deng, G. and Cahill, L. (1993). "An adaptive gaussian filter for noise reduction and edge detection." 1993 IEEE Conference Record Nuclear Science Symposium and Medical Imaging Conference, IEEE, United States.
- Dixit, A., Pang, S. D., Kang, S. H. and Moon, J. H. (2019). "Lightweight structural cement composites with expanded polystyrene (EPS) for enhanced thermal insulation." Cement and Concrete Composites, Vol. 102, pp. 185-197. https://doi.org/10.1016/j.cemconcomp.2019.04.023
- Eurocode, C. (1992). 2: Design of concrete structures, British Standards Institution.
- Gao, Y., Cheng, L., Gao, Z. and Guo, S. (2013). "Effects of different mineral admixtures on carbonation resistance of lightweight aggregate concrete." Construction and Building Materials, Vol. 43, pp. 506-510. https://doi.org/10.1016/j.conbuildmat.2013.02.038
- Huang, X., Ranade, R., Zhang, Q., Ni, W. and Li, V. C. (2013). "Mechanical and thermal properties of green lightweight engineered cementitious composites." Construction and Building Materials, Vol. 48, pp. 954-960. https://doi.org/10.1016/j.conbuildmat.2013.07.104
- Kang, S. H., Hong, S. G. and Moon, J. H. (2018). "Importance of drying to control internal curing effects on field casting ultra-high performance concrete." Cement and Concrete Research, Vol. 108, pp. 20-30. https://doi.org/10.1016/j.cemconres.2018.03.008
- Kim, H. K., Jeon, J. H. and Lee, H. K. (2012). "Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air." Construction and Building Materials, Vol. 29, pp. 193-200. https://doi.org/10.1016/j.conbuildmat.2011.08.067
- Krakowiak, K. J., Nannapaneni, R. G., Moshiri, A., Phatak, T., Stefaniuk, D., Sadowski, L. and Qomi, M. J. A. (2020). "Engineering of high specific strength and low thermal conductivity cementitious composites with hollow glass microspheres for high-temperature high-pressure applications." Cement and Concrete Composites, Vol. 108, 103514. https://doi.org/10.1016/j.cemconcomp.2020.103514
- Lee, N. K., Jeong, Y. U., Kang, H. U. and Moon, J. H. (2020). "Heat-induced acceleration of pozzolanic reaction under restrained conditions and consequent structural modification." Materials, Vol. 13, No. 13, 2950. https://doi.org/10.3390/ma13132950
- Mohammad, M., Masad, E., Seers, T. and Al-Ghamdi, S. G. (2020). "Properties and microstructure distribution of high-performance thermal insulation concrete." Materials, Vol. 13, No. 9, 2091. https://doi.org/10.3390/ma13092091
- Mounanga, P., Gbongbon, W., Poullain, P. and Turcry, P. (2008). "Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes." Cement and Concrete Composites, Vol. 30, No. 9, pp. 806-814. https://doi.org/10.1016/j.cemconcomp.2008.06.007
- Otsu, N. (1979). "A threshold selection method from gray-level histograms." IEEE Transactions on Systems, Man, and Cybernetics, Vol. 9, No. 1, pp. 62-66. https://doi.org/10.1109/TSMC.1979.4310076
- Sengul, O., Azizi, S., Karaosmanoglu, F. and Tasdemir, M. A. (2011). "Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete." Energy and Buildings, Vol. 43, No. 2, pp. 671-676. https://doi.org/10.1016/j.enbuild.2010.11.008
- Standard, B. (2004). Eurocode 2: Design of concrete structures-. Part 1, Vol. 1, pp. 230.
- Tandiroglu, A. (2010). "Temperature-dependent thermal conductivity of high strength lightweight raw perlite aggregate concrete." International Journal of Thermophysics, Vol. 31, No. 6, pp. 1195-1211. https://doi.org/10.1007/s10765-010-0826-5
- Wu, Y., Wang, J. Y., Monteiro, P. J. M. and Zhang, M. H. (2015). "Development of ultra-lightweight cement composites with low thermal conductivity and high specific strength for energy efficient buildings." Construction and Building Materials, Vol. 87, pp. 100-112. https://doi.org/10.1016/j.conbuildmat.2015.04.004
- Yun, T. S., Jeong, Y. J., Han, T. S. and Youm, K. S. (2013). "Evaluation of thermal conductivity for thermally insulated concretes." Energy and Buildings, Vol. 61, pp. 125-132. https://doi.org/10.1016/j.enbuild.2013.01.043
- Zhou, H. and Brooks, A. L. (2019). "Thermal and mechanical properties of structural lightweight concrete containing light-weight aggregates and fly-ash cenospheres." Construction and Building Materials, Vol. 198, pp. 512-526. https://doi.org/10.1016/j.conbuildmat.2018.11.074