DOI QR코드

DOI QR Code

Study of compressive behavior of triple joints using experimental test and numerical simulation

  • Sarfarazi, Vahab (Department of Mining Engineering, Hamedan University of Technology) ;
  • Wang, Xiao (School of Civil Engineering, Southeast University) ;
  • Nesari, Mojtaba (Department of Mining Engineering, Hamedan University of Technology) ;
  • Ghalam, Erfan Zarrin (Department of Mining Engineering, Hamedan University of Technology)
  • 투고 : 2021.03.01
  • 심사 : 2022.04.03
  • 발행 : 2022.07.25

초록

Experimental and discrete element methods were used to investigate the effects of triple joints lengths and triple joint angle on the failure behavior of rock mass under uniaxial compressive test. Concrete samples with dimension of 20 cm × 20 cm × 5 cm were prepared. Within the specimen, three imbedded joint were provided. The joint lengths were 2 cm, 4cm and 6 cm. In constant joint lengths, the angle between middle joint and other joints were 30°, 60°, 90°, 120° and 150°. Totally 15 different models were tested under compression test. The axial load rate on the model was 0.05 mm/min. Concurrent with experimental tests, the models containing triple joints, length and joint angle are similar to the experiments, were numerical by Particle flow code in two dimensions (PFC2D). Loading rate in numerical modelling was 0.05 mm/min. Tensile strength of material was 1 MPa. The results show that the failure behaviors of rock samples containing triple joints were governed by both of the angle and the length of the triple joints. The uniaxial compressive strengths (UCS) of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. Furthermore, it was shown that the compressive behavior of discontinuities is related to the number of the induced tensile cracks which are increased by decreasing the joint length. Along with the damage failure of the samples, the acoustic emission (AE) activities are excited. There were only a few AE hits in the initial stage of loading, then AE hits rapidly grow before the applied stress reached its peak. In addition, every stress drop was accompanied by a large number of AE hits. Finally, the failure pattern and failure strength are similar in both methods i.e., the experimental testing and the numerical simulation methods.

키워드

참고문헌

  1. Ashby, M.F. and Hallam, S.D. (1986), "The failure of brittle solids containing small cracks under compressive stress states", Acta Metallurgica, 34(3), 497-510. https://doi.org/10.1016/0001-6160(86)90086-6
  2. Bobet, A. and Einstein, H.H. (1998a), "Failure coalescence in rock-type material under uniaxial and biaxial compression", Int. J. Rock Mech. Min. Sci., 35(7), 863-888. https://doi.org/10.1016/S0148-9062(98)00005-9
  3. Bobet, A. and Einstein, H.H. (1998b), "Numerical modeling of fracture coalescence in a model rock material", Int. J. Fract., 92, 221-252. https://doi.org/10.1023/A:1007460316400
  4. Brace, W.F. and Bombolakis, E.G. (1963), "A note on brittle crack growth in compression", J. Geophys. Res., 68(12), 3709-3713. https://doi.org/10.1029/JZ068i012p03709
  5. Cao, R., Yao, R., Meng, J., Lin, Q., Lin, H. and Li, S. (2020), "Failure mechanism of non-persistent jointed rock like specimens under uniaxial loading: laboratory testing", Int. J. Rock Mech. Min. Sci., 132, 104314. https://doi.org/10.1016/j.ijrmms.2020.104341
  6. Euser, B., Rougier, E., Lei, Z., Knight, E.E., Frash, L.P., Carey, J.W., Viswanathan, H. and Munjiza, A. (2019), "Simulation of fracture coalescence in granite via the combined finite-discrete element method", Rock Mech. Rock Eng., 52(9), 3213-3227. https://doi.org/10.1007/s00603-019-01773-0
  7. Ghazvinian, A., Sarfarazi, V., Schubert, W. and Blumel, M. (2012), "A study of the failure mechanism of planar non-persistent open joints using PFC2D", Rock Mech. Rock Eng., 45(5), 677-693. https://doi.org/10.1007/s00603-012-0233-2
  8. Hu, J., Wen, G., Lin, Q., Cao, P. and Li, S. (2020), "Mechanical properties and crack evolution of double-layer composite rock-like specimens with two parallel fissures under uniaxial compression", Theor. Appl. Fract. Mech., 108, 102610. https://doi.org/10.1016/j.tafmec.2020.102610
  9. Lajtai, E.Z. (1971), "A theoretical and experimental evaluation of the Griffith theory of brittle fracture", Tectonophysics, 11(2), 129-156. https://doi.org/10.1016/0040-1951(71)90060-6
  10. Li, H. and Wong, L.N.Y. (2012), "Influence of flaw inclination angle and loading condition on crack initiation and propagation", Int. J. Solids Struct., 49(18), 2482-2499. https://doi.org/10.1016/j.ijsolstr.2012.05.012
  11. Lin, Q. (2020a), "Mechanical behavior around double circular openings in a jointed rock mass under uniaxial compression", Arch. Civil Mech. Eng., 20, 19-32. https://doi.org/10.1007/s43452-020-00027-z
  12. Lin, Q. (2020b), "Crack coalescence in rock-like specimens with two dissimilar layers and pre-existing double parallel joints under uniaxial compression", Int. J. Rock Mech. Min. Sci., 139, 104621. https://doi.org/10.1016/j.ijrmms.2021.104621
  13. Lin, Q. (2020c), "Fatigue behaviour and constitutive model of yellow sandstone containing pre-existing surface crack under uniaxial cyclic loading", Theor. Appl. Fract. Mech., 109, 102776. https://doi.org/10.1016/j.tafmec.2020.102776
  14. Lin, Q. (2020d), "Strength and failure characteristics of jointed rock mass with double circular holes under uniaxial compression: Insights from discrete element method modelling", Theor. Appl. Fract. Mech., 109(7), 102692. https://doi.org/10.1016/j.tafmec.2020.102692
  15. Lue, X., Cao, P. and Lin, Q. (2021), "Mechanical behaviour of fracture-filled rock-like specimens under compression-shear loads: An experimental and numerical study", Theor. Appl. Fract. Mech., 113, 102935. https://doi.org/10.1016/j.tafmec.2021.102935
  16. Oner, E., Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., Int. J., 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.000
  17. Potyondy, D.O. and Cundall, P.A. (2004), "A bonded-particle model for rock", Int. J. Rock Mech. Min. Sci., 41, 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011
  18. Price, N.J. (1966), Fault and joint development in brittle and semi-brittle rock, London: Permagon Press Ltd.
  19. Prudencio, M. and Jan, M.V.S. (2007), "Strength and failure modes of rock mass models with non-persistent joints", Int. J. Rock Mech. Min. Sci., 44(6), 890-902. https://doi.org/10.1016/j.ijrmms.2007.01.005
  20. Reyes, O. and Einstein, H.H. (1991), "Failure mechanism of fractured rock-a fracture coalescence model", Proceedings of 7th International Congress of Rock Mechanics, pp. 333-340.
  21. Shemirani, A.B., Amini, M.S., Sarfarazi, V., Shahriar, K., Moarefvand, P. and Haeri, H. (2021), "Experimental and numerical investigation of the effect of bridge area and its angularities on the failure mechanism of non-persistent crack in concrete-like materials", Smart Struct. Syst., Int. J., 27(3), 54-67. https://doi.org/10.12989/sss.2021.27.3.479
  22. Shen, B., Stephansson, O., Einstein, H.H. and Ghahreman, B. (1995), "Coalescence of fractures under shear stresses in experiments", J. Geophys. Res., 100(6), 5975-5990. https://doi.org/10.1029/95JB00040
  23. Shen, B., Stephansson, O., Rinne, M., Lee, H.S., Jing, L. and Roshoff, K. (2004), "A fracture propagation code and its applications to nuclear waste disposal", Int. J. Rock Mech. Min. Sci., 41(3), 448-449. https://doi.org/10.1016/j.ijrmms.2004.03.085
  24. Tang, C.A. and Kou, S.Q. (1998), "Crack propagation and coalescence in brittle materials under compression", Eng. Fract. Mech., 61(3-4), 311-324. https://doi.org/10.1016/S0013-7944(98)00067-8
  25. Wang, X. and Tian, L.G. (2018), "Mechanical and crack evolution characteristics of coal-rock under different fracture-hole conditions: a numerical study based on particle flow code", Environ. Earth Sci., 77(8), 1-10. https://doi.org/10.1007/s12665-018-7486-3
  26. Wang, X., Wen, Z.J. and Jiang, Y.J. (2016), "Time-space effect of stress field and damage evolution law of compressed coalrock", Geotech. Geol. Eng., 34(6), 1933-1940. https://doi.org/10.1007/s10706-016-0074-y
  27. Wong, R.H. and Chau, K.T. (1998), "Crack coalescence in a rock-like material containing two cracks", Int. J. Rock Mech. Min. Sci., 35(2), 147-164. https://doi.org/10.1016/S0148-9062(97)00303-3
  28. Wong, L.N.Y. and Einstein, H.H. (2009), "Crack coalescence in molded gypsum and Carrara marble: part 1. Macroscopic observations and interpretation", Rock Mech. Rock Eng., 42(3), 475-511. https://doi.org/10.1007/s00603-008-0002-4
  29. Yang, S.Q., Dai, Y.H., Han, L.J. and Jin, Z.Q. (2009), "Experimental study on mechanical behavior of brittle marble samples containing different flaws under uniaxial compression", Eng. Fract. Mech., 76(12), 1833-1845. https://doi.org/10.1016/j.engfracmech.2009.04.005
  30. Yaylaci, M. (2016), "The investigation crack problem through numerical analysis", Struct. Eng. Mech., Int. J., 57(6), 1143-1156. https://doi.org/10.12989/sem.2016.57.6.1143
  31. Yaylaci, M. (2019), "Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane", Struct. Eng. Mech., Int. J., 72(6), 111-123. https://doi.org/10.12989/sem.2019.72.6.775
  32. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., Int. J., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241
  33. Yaylaci, E.U., Yaylaci, M., Olmez, H. and Birinci, A. (2020), "Artificial neural network calculations for a receding contact problem", Comput. Concrete, Int. J., 25(6), 77-89. https://doi.org/10.12989/cac.2020.25.6.077
  34. Zhang, K., Cao, P., Meng, J., Li, K. and Fan, W. (2015), "Modeling the progressive failure of jointed rock slope using fracture mechanics and the strength reduction method", Rock Mech. Rock Eng., 48(2), 771-785. https://doi.org/10.1007/s00603-014-0605-x
  35. Zhang, Q., Wang, X., Tian, L.G. and Huang, D.M. (2018), "Analysis of mechanical and acoustic emission characteristics of rock materials with double-hole defects based on particle flow code", Shock Vib., 32(1), 23-35. https://doi.org/10.1155/2018/7065029
  36. Zhang, X., Bayat, V., Koopialipoor, M., Armaghani, D.J., Yong, W. and Zhou, J. (2020), "Evaluation of structural safety reduction due to water penetration into a major structural crack in a large concrete project", Smart Struct. Syst., Int. J., 26(3), 90-108. https://doi.org/10.12989/sss.2020.26.3.319
  37. Zhou, X.P., Cheng, H. and Feng, Y.F. (2014), "An experimental study of crack coalescence behaviour in rock-like materials containing multiple flaws under uniaxial compression", Rock Mech. Rock Eng., 47(6), 1961-1986. https://doi.org/10.1007/s00603-013-0511-7
  38. Zhou, X.P., Bi, J. and Qian, Q.H. (2015), "Numerical simulation of crack growth and coalescence in rock-like materials containing multiple pre-existing flaws", Rock Mech. Rock Eng., 48(3), 1097-1114. https://doi.org/10.1007/s00603-014-0627-4