한국추진공학회지 (Journal of the Korean Society of Propulsion Engineers)

  • 제26권1호
  • /
  • Pages.47-59
  • /
  • 2022
  • /
  • 1226-6027(pISSN)
  • /
  • 2288-4548(eISSN)
한국추진공학회 (The Korean Society of Propulsion Engineers)
권호 표지
DOI QR코드

DOI QR Code

적층제조 와류동축형 분사기 리세스 길이에 따른 분무특성

Spray Characteristics of Additive Manufactured Swirl Coaxial Injectors with Different Recess Lengths

  • Ahn, Jonghyeon (School of Mechanical Engineering, Chungbok National University) ;
  • Lim, Ha Young (Launcher Propulsion Control Team, Korea Aerospace Research Institute) ;
  • Ahn, Kyubok (School of Mechanical Engineering, Chungbok National University)
  • 투고 : 2021.10.26
  • 심사 : 2022.01.11
  • 발행 : 2022.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

리세스 길이가 다른 4개의 와류동축형 분사기를 적층제조 방식으로 제작하였다. 상압 환경에서 물과 공기를 모사추진제로 하여 단일분사 및 혼합분사 수류실험을 수행하였다. 리세스 길이와 추진제 유량 조건에 따른 분사차압과 유량계수를 확인하였고, 이미지 분석을 통해 분열길이와 분무각을 측정하였다. 혼합분사 분사차압 및 유량계수 결과에서 액체 분사기는 리세스에 영향을 받지 않았다. 하지만 기체 분사기는 리세스 길이 증가에 따라 분사차압이 증가하고 유량계수가 감소하였다. 단일분사 시 분열길이는 리세스 증가에 따라 길어졌지만, 혼합분사에서는 반대로 감소하였다.

Four swirl coaxial injectors with different recess lengths were manufactured using an additive manufacturing method. Single-injection and bi-injection cold-flow experiments were performed using water and air as simulated propellants in an atmospheric pressure environment. According to the recess length and propellant flow conditions, the injection pressure drop and discharge coefficient were investigated, and the breakup length and spray angle were measured using an image processing technique. In the bi-injection pressure drop and discharge coefficient results, the liquid-side injector was not affected by the recess. For the gas-side injector, however, the injection pressure drop increased and the discharge coefficient decreased as the recess length increased. The breakup length in the single-injection increased with the increase of the recess, but decreased in the bi-injection.

키워드

과제정보

본 논문은 과학기술정보통신부의 재원으로 한국연구재단(NRF-2021M1A3B8077772, NRF-2021M1A3B9095872) 및 한국항공우주연구원(KARI-FR21C00)의 지원을 받아서 수행되었으며, 이에 감사드립니다.

참고문헌

  1. Wong, K.V. and Hernandez, A., "A Review of Additive Manufacturing," International Scholarly Research Network, Vol. 2012, pp. 1-10, 2012.
  2. Gill, G.S. and Nurick, W.H., "Liquid Rocket Engine Injectors," NASA SP-8089, 1976.
  3. Soller, S., Barata, A., Beyer, S., Dahlhaus, A. Guichard, D., Humbert, E., Kretschmer, J. and Zeiss, W., "Selective Laser Melting (SLM) of Inconel 718 and Stainless Steel Injectors for Liquid Rocket Engines," Space Propulsion 2016 Proceedings, Rome, Italy, SPC 2016-312478, May 2016.
  4. Terracciano, A., Carapellese, S., Bianchi, G., Liuzzi, D., Rudnykh, M., Drigo, D. and Del Brusco, F., "Additive Layer Manufacturing Technology In Avio Injector Head Design," 7th European Conference for Aeronautics and Space Science, Milano, Italy, EUCASS 2017-455, Jul. 2017.
  5. Soller, S., Beyer, S., Dahlhaus, A., Konrad, A., Kretschmer, J., Rackemann, N. and Zeiss, W., "Development of Liquid Rocket Engine Injectors Using Additive Manufacturing," 6th European Conference for Aeronautics and Space Science, Krakow, Poland, EUCASS 2015-031, Jun. 2015.
  6. Lim, H.Y. and Roh, W.R., "Selective Laser Melting(SLM) for LOx/Methane Mixing Head," 53rd KSPE Fall Conference, Busan, Korea, pp. 325-328, Nov. 2019.
  7. Huzel, D.K. and Huang, D.H., Modern Engineering for Design of Liquid-Propellant Rocket Engines, Progress in Astronautics and Aeronautics, Washington, D.C., U.S.A., 1992.
  8. Kang, J., Li, Q., Zhang, J. and Cheng, P., "Effects of Gas Liquid Ratio on the Atomization Characteristics of Gas-Liquid Swirl Coaxial Injectors," Acta Astronautica, Vol. 146, pp. 24-32, 2018. https://doi.org/10.1016/j.actaastro.2018.02.026
  9. Dombrowski, N. and Johns, W.R., "The Aerodynamic Instability and Disintegration of Viscous Liquid Sheet," Chemical Engineering Science, Vol. 18, No. 3, pp. 203-214, 1963. https://doi.org/10.1016/0009-2509(63)85005-8
  10. Yang, L., Ge, M., Zhang, M., Fu, Q. and Cai, G., "Spray Characteristics of a Recessed Gas-Liquid Coaxial Swirl Injector," Journal of Propulsion and Power, Vol. 24, No. 6, pp. 1332-1339, 2008. https://doi.org/10.2514/1.23977
  11. Bae, S.H., Kwon, O.C. and Kim, J.S., "Spray Characteristics of Swirl-coaxial Injector According to the Recess Length and Injection Pressure Variation," Journal of the Korean Society of Propulsion Engineers, Vol. 20, No. 4, pp. 68-76, 2016. https://doi.org/10.6108/KSPE.2016.20.4.068
  12. Jeong, G., Lee, Y., Yoon, J., Jo, H. and Yoon, Y., "Atomization and Distribution of Droplets in Gas-Liquid Sprays by Coaxial Swirl Injectors," Atomization and Sprays, Vol. 30, No. 8, pp. 607-626, 2020. https://doi.org/10.1615/atomizspr.2020033825
  13. Yap, C.Y., Chua, C.K., Dong, Z.L., Liu, Z.H., Zhang, D.Q., Loh, L.E. and Sing, S.L., "Review of Selective Laser Melting: Materials and Applications," Applied Physics Reviews, Vol. 2, No. 4, 041101, 2015. https://doi.org/10.1063/1.4935926
  14. Ahn, J., Lee, K. and Ahn, K., "Effect of Geometrical Parameters on Discharge Coefficients of a Shear Coaxial Injector," Journal of ILASS-Korea, Vol. 25, No. 3, pp. 95-102, 2020. https://doi.org/10.15435/JILASSKR.2020.25.3.95
  15. Ahn, J., Lee, K. and Ahn, K., "Study on Atomization Characteristics of Shear Coaxial Injectors," Journal of ILASS-Korea, Vol. 26, No. 1, pp. 9-17, 2021. https://doi.org/10.15435/JILASSKR.2021.26.1.9
  16. Van den Bosch, C.J.H. and Weterings, R.A.P.M., Methods for the Calculation of Physical Effects, 3rd Ed., Yellow Book, CPR 14E, The Hague, Netherlands, 2005.
  17. Ahn, K. and Choi, H., "An Extensive Study on the Discharge Coefficients of Open-type Swirl Injectors," Atomization and Sprays, Vol. 27, No. 10, pp. 835-846, 2017. https://doi.org/10.1615/AtomizSpr.2017019293
  18. Otsu, N., "A Threshold Selection Method from Gray-level Histograms," IEEE Transactions on Systems, Man, and Cybernetics, Vol. 9, No. 1, pp. 62-66, 1979. https://doi.org/10.1109/TSMC.1979.4310076
  19. Canny, J., "A computational approach to edge detection," IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. PAMI-8, No. 6, pp. 679-698, 1986. https://doi.org/10.1109/TPAMI.1986.4767851
  20. Mayer, W. and Krulle, G., "Rocket Engine Coaxial Injector Liquid/Gas Interface Flow Phenomena," Journal of Propulsion and Power, Vol. 11, No. 3, pp. 513-518, 1995. https://doi.org/10.2514/3.23872
  21. Fu, Q., Yang, L. and Qu, Y., "Measurement of Annular Liquid Film Thickness in an Open-end Swirl Injector," Aerospace Science and Technology, Vol. 15, No. 2, pp. 117-124, 2011. https://doi.org/10.1016/j.ast.2010.06.006