DOI QR코드

DOI QR Code

Assessment of collapse safety margin for DDBD and FBD-designed RC frame buildings

  • 투고 : 2021.10.07
  • 심사 : 2022.05.07
  • 발행 : 2022.07.25

초록

This paper investigates the seismic performance of buildings designed using DDBD (Direct Displacement based Design) and FBD (Force based Design) approaches from the probabilistic viewpoint. It aims to estimate the collapse capacity of structures and assess the adequacy of seismic design codes. In this regard, (i) IDA (Incremental Dynamic Analysis) curves, (ii) interstory drift demand distribution curves, (iii) fragility curves, and (iv) the methodology provided by FEMA P-695 are applied to examine two groups of RC moment resistant frame buildings: 8-story structures with different plans, to study the effect of different span arrangements; and 3-, 7- and 12-story structures with a fixed plan, to study the dynamic behavior of the buildings. Structural modeling is performed in OpenSees software and validated using the results of an experimental model. It is concluded that increasing the building height would not significantly affect the response estimation of IDA and fragility curves of DDBD-designed structures, while the change in span arrangements is effective in estimating responses. In the investigation of the code adequacy, unlike the FBD approach, the DDBD can satisfy the performance criteria presented in FEMA P-695 and hence provide excellent performance.

키워드

참고문헌

  1. ACI 318 (2005). Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), American Concrete Institute.
  2. Alimohammadi, D. and Izadi Zaman Abadi, E. (2019), "Evaluation of seismic design approach on RC/MR building using different probabilistic methods", 8th International Conference on Seismology & Earthquake Engineering, Tehran, Iran, November.
  3. Alimohammadi, D. and Izadi Zaman Abadi, E. (2020), "Probabilistic performance appraisal of seismic structural design methodologies: A case study for RC/MRF systems", J. Seismol. Earthq. Eng., 22(2), 89-100.
  4. Alimohammadi, D. and Izadi Zaman Abadi, E. (2021a), "Investigating the effects of span arrangements on DDBD-designed RC buildings under the skew seismic attack", Struct. Eng. Mech., 77(1), 115-135. https://doi.org/10.12989/sem.2021.77.1.115.
  5. Alimohammadi, D. and Izadi Zaman Abadi, E. (2021b), "Reliability-based probabilistic safety evaluation of seismic design approaches for RC-MR buildings", ASCE-ASME J. Risk Uncert. Eng. Syst. Part A Civil Eng., 7(2), 04021017. https://doi.org/10.1061/ajrua6.0001128.
  6. Ansari, M., Safiey, A. and Abbasi, M. (2020), "Fragility-based performance evaluation of mid-rise reinforced concrete frames in near field and far field earthquakes", Struct. Eng. Mech., 76(6), 751-763. https://doi.org/10.12989sem.2020.76.6.751. https://doi.org/10.12989/SEM.2020.76.6.751
  7. Arzeytoon, A. and Toufigh, V. (2018), "Probabilistic seismic performance assessment of ribbed bracing systems", J. Constr. Steel Res., 148, 326-335. https://doi.org/10.1016/j.jcsr.2018.05.037.
  8. Basone, F., Cavaleri, L., Di Trapani, F. and Muscolino, G. (2017), "Incremental dynamic based fragility assessment of reinforced concrete structures: Stationary vs. non-stationary artificial ground motions", Soil Dyn. Earthq. Eng., 103, 105-117. https://doi.org/10.1016/j.soildyn.2017.09.019
  9. Bracci, J.M., Reinhorn, A.M. and Mander, J.B. (1992), "Seismic resistance of reinforced concrete structures designed only for gravity loads: part I-design and properties of a one-third scale model structure", NCEER-92-0027, University at Buffalo, the State University of New York, USA.
  10. Bracci, J.M., Reinhorn, A.M. and Mander, J.B. (1995), "Seismic resistance of reinforced concrete frame structures designed for gravity loads: performance of structural system", ACI Mater. J., 92(5), 597-609. https://doi.org/10.14359/909.
  11. Calvi, G.M. and Sullivan, T.J. (2009), A Model Code for the Displacement-Based Seismic Design of Structures: DBD09 Draft subject to Public Enquiry, Iuss Press.
  12. Choi, K.S., Park, J.Y. and Kim, H.J. (2017), "Numerical investigation on design requirements for steel ordinary braced frames", Eng. Struct., 137, 296-309. https://doi.org/10.1016/j.engstruct.2017.01.066.
  13. FEMA 350 (2000), Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, Federal Emergency Management Agency, Washington, D.C.
  14. FEMA 450 (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and other structures, Federal Emergency Management Agency, Washington, D.C.
  15. FEMA P-695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, D.C.
  16. Fiorino, L., Shakeel, S., Macillo, V. and Landolfo, R. (2017), "Behaviour factor (q) evaluation the CFS braced structures according to FEMA P695", J. Constr. Steel Res., 138, 324-339. https://doi.org/10.1016/j.jcsr.2017.07.014.
  17. Fox, M.J., Sullivan, T.J. and Beyer, K. (2015), "Evaluation of seismic assessment procedures for determining deformation demands in RC wall buildings", Earthq. Struct., 9(4), 911-936. https://doi.org/10.12989/eas.2015.9.4.911.
  18. Iranian Standard 2800 (2013), Iranian Code of Practice for Seismic Resistant Design of Buildings, Road, Housing & Urban Development Research Center.
  19. Jalali, S.A., Banazadeh, M., Abolmaali, A. and Tafakori, E. (2011), "Probabilistic seismic demand assessment of steel moment frames with side-plate connections", Sci. Iran., 19(1), 27-40. https://doi.org/10.1016/j.scient.2011.11.036.
  20. Khatami, A., Heshmati, M. and Aghakouchak, A.A. (2020), "Collapse assessment and seismic performance factors in tall tube-in-tube diagrid buildings", Earthq. Struct., 19(3), 197-214. https://doi.org/10.12989/eas.2020.19.3.197.
  21. Kheyroddin, A., Rouhi, S. and Dabiri, H. (2021), "An experimental study on the influence of incorporating lap or forging (GPW) splices on the cyclic performance of RC columns", Eng. Struct., 241, 1-12. https://doi.org/10.1016/j.engstruct.2021.112434.
  22. Khorami, M., Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.
  23. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  24. Kumbhar, O.G. and Kumar, R. (2020), "Performance assessment of RC frame designed using force, displacement & energy based approach", Struct. Eng. Mech., 73(6), 699-714. https://doi.org/10.12989/sem.2020.73.6.699.
  25. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  26. Mashhadiali, N. and Kheyroddin, A. (2019), "Quantification of the seismic performance factors of steel hexagrid structures", J. Constr. Steel Res., 157, 82-92. https://doi.org/10.1016/j.jcsr.2019.02.013.
  27. McKenna, F., Fenves, G.L. and Scott, M.H. (2016), OpenSees: Open System for Earthquake Engineering Simulation, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  28. Mirtaheri, M., Amini, M. and Khorshidi, H. (2017), "Incremental dynamic analyses of concrete buildings reinforced with shape memory alloy", Steel Compos. Struct., 23(1), 95-105. https://doi.org/10.12989/scs.2017.23.1.095.
  29. Peng, C. and Guner, S. (2018), "Direct displacement-based seismic assessment of concrete frames", Comput. Concrete, 21(4), 355-365. https://doi.org/10.12989/cac.2018.21.4.355.
  30. Pettinga, J.D. and Priestley, M.J.N. (2005), "Dynamic behaviour of reinforced concrete frames designed with direct displacement-based design", J. Earthq. Eng., 9, 309-330. https://doi.org/10.1142/S1363246905002419.
  31. Pettinga, J.D. and Priestley, M.J.N. (2008), "Accounting for P-Delta effects in structures when using direct displacement-based design", The 14th World Conference on Earthquake Engineering, Beijing, October.
  32. Powell, G.H. (2008), "Displacement-based seismic design of structures", Earthq. Spectra, 24(2), 555-557. https://doi.org/10.1193/1.2932170.
  33. Priestley, M.J.N. (2007), "Fundamentals of direct displacement-based seismic design and assessment", CISM Int. Centre Mech. Sci., 494, 133-154. https://doi.org/10.1007/978-3-211-74214-3_8.
  34. Salawdeh, S. and Goggins, J. (2016), "Direct displacement based seismic design for single storey steel concentrically braced frames", Earthq. Struct., 10(5), 1125-1141. https://doi.org/10.12989/eas.2016.10.5.1125.
  35. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  36. Shibata, A. and Sozen, M.A. (1976), "Substitute-structure method for seismic design in R/C", J. Struct. Div., 102(1), 1-18. https://doi.org/10.1061/JSDEAG.0004250.
  37. Sullivan, T.J., Priestley, M.J.N. and Calvi, G.M. (2012), A Model Code for the Displacement-Based Seismic Design of Structures: DBD12, Iuss Press.
  38. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  39. Vamvatsikos, D., Jalayer, F. and Cornell, C.A. (2003), "Application of incremental dynamic analysis to an RC-structure", Proceedings of the FIB Symposium on Concrete Structures in Seismic Regions, Athens, May.
  40. Wu, Y.T., Zhou, Q., Wang, B., Yang, Y.B. and Lan, T.Q. (2018), "Seismic collapse safety of high-rise RC moment frames supported on two ground levels", Earthq. Struct., 14(4), 349-360. https://doi.org/10.12989/eas.2018.14.4.349.