한국안전학회지 (Journal of the Korean Society of Safety)

  • 제37권3호
  • /
  • Pages.1-8
  • /
  • 2022
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

고소 작업용 섬유로프의 고정 매듭법에 따른 강도 변화의 해석 및 실험적 연구

Analysis and Experimental Study of Strength Change according to Fixed Knot Method of Fiber Rope for High Altitude Work

  • Song, S.M. (Samsung Electronics Co., Ltd.) ;
  • Kim, M.S. (Samsung Electronics Co., Ltd.) ;
  • Shin, D.Y. (Samsung Electronics Co., Ltd.) ;
  • Lim, S.H. (Samsung Electronics Co., Ltd.) ;
  • Kwon, O.H. (Department of Safety Engineering, Pukyong National University) ;
  • Park, W.R. (Korea Industrial Safety Association, Safety Education Division)
  • 투고 : 2022.02.09
  • 심사 : 2022.05.29
  • 발행 : 2022.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Workplace accidents are common while working at elevations. Thus, various safety measures such as safety handrails and horizontal safety nets are implemented to prevent falls. The minimum safety measure is the lifeline installation. However, because its standards have not been clearly established, it is often misused, resulting in inappropriate knot methods that increase the chance of accidents while working at elevations. Therefore, clarifying the appropriate usage methods or criteria for the various lifelines is required in the field. This study proposed an appropriate installation method by experimentally and numerically evaluating the change in strength according to the fixed knot lifeline method. In addition, three knot methods were specified for each material. The results obtained are expected to contribute to lessening falls through the establishment of lifeline installation standards and the development of appropriate parts.

키워드

참고문헌

  1. D. Y. Bae, "A Research on An Improvement and Application of a Hook for Fixing Falling Protection Lifeline", Korean National University of Transporation, 2013.
  2. S. C. Jung, "A Study on the Improvement of the Safety of the Suspended Scaffolding Work", The Occupational Safety and Health Research Institute, Vol. 2, No. 11, 2018.
  3. E. J. Kim and H. S. Ahn, "Effective Disaster Risk Management Measures Fall", J. Korean Soc. Saf., Vol. 27, No. 2, pp. 41-47, 2012.
  4. W. J. Nam, "The Study on the Application of the Safety Management Utilizing USN Using Smart Safety Equipment to Reduce Falling Accident on Construction Sites", J. Korean Soc. Saf., Vol. 35, No. 6, pp. 46-53, 2020. https://doi.org/10.14346/JKOSOS.2020.35.6.46
  5. J. M. Yoon, "A Study on Development of Safety Rope using Wire Rope at the Construction site", Kyonggi University, 2012.
  6. Y. S. Kim, H. J. Kim, J. W. Seo and J. Y. Kim, "Improving the Vertical Life Line to Prevent Falling Down of Workers during Dismantling of Scaffolding in Temporary Work", Proceedings of Korea Institute of Construction Engineering and Management Annual Conference, Vol. 16, pp. 41-42, 2017.
  7. Korea Industrial Safety Association, The Safety technology, pp. 92-107, 2004.
  8. G. S. Kim, S. S. Park and J. H. Cha, "Superfiber, Ultra-lightweight Ultra-high Strength Polyethylene Fiber", The Korean Fiber Society, Vol. 15, pp. 16-21, 2011.
  9. M. H. Kim, The Safety Technology, Korea Industrial Safety Association, No. 192, pp. 36-39, 2013.
  10. Ministry of Employment and Labor, Standard Safety Operation Guidelines for Falling Disaster Prevention, 2020.
  11. Korea Occupational Safety & Health Agency, Safety Work on Fiber Ropes, 2012.