과제정보
본 연구는 2021년도 교육부의 재원으로 한국연구재단의 지원을 받아 수행된 지자체-대학 협력기반 지역혁신 사업(2021RIS-003)과 2022년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구(P0001968, 2022년 산업혁신인재성장지원사업)의 결과입니다.
참고문헌
- American Society for Testing and Materials(ASTM)(2013), Standard Test Methods for Tension Testing of Metallic Materials (ASTM E8/E8M-13a), ASTM International: West Conshohocken, PA, USA.
- Andrew Pytel and Jaan Kiusalaas(2013), Mechanics of Materials, Cengage learning, second edition.
- Cho, B. K., D. W. Choi, G. B. Kim, Y. J. Chang, J. H. Song, and C. H. Jeon(2009), Effect of the Degree of Fuel-Air Mixing and Equivalence Ratio on the NOx Emission and Heat Release in a Dump Combustor, Trans. Korean Soc. Mech. Eng. B, Vol. 33, No. 9, pp. 658-665.
- Choi, Y. J. and J. W. Choi(2020), Experimental Study on the Changes in the Oxygen Concentration and the Pressure at Temperature of 200'C for the Assessment of the Risks of Fire and Explosion of Propylene, Korean Chem. Eng. Res., Vol 58, No. 3, pp. 356-361.
- Explore the World of Piping(2022), Lower and Upper Explosive Limits for Flammable Gases and Vapors, https://www.wermac.org/safety/safety_what_is_lel_and_uel.html.
- Han, S. H., H. C. Lee, K. S. Park, and T. O. Kim(2014), Consequence Analysis for Fire and Explosion Accidents in Propylene Recovery Process, KIGAS, Vol. 18, No. 1, pp. 52-60.
- HORIBA(2001), Horiba MEXA-7000DEGR Instruction Manual.
- Jeong, T. H., S. G. Kang, J. K. Lee, J. G. Ahn(2018), Introduction to International Maritime Organization (IMO) GHG Emissions Regulation and Domestic and Foreign Response Measures, The Society of Naval Architects of Korea, Vol. 55, No. 4, pp. 48-54.
- KEA(2021), Energy issue briefing, No. 166, pp. 1-5.
- Kim, J. W., H. Lim, Y. G. Go, and C. H. Jeon(2016), Characteristics of UBC and NOx Emission in Air Staging Combustion, Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 10, pp. 637-644.
- KOSA(2019), An Analysis of the Shipment Structure of Steel Report.
- Lee, J. B., D. Y. Kim, D. H. Shin, S. H. Lee(2013), Thermal and Flow Characteristics of Fluid with Fuel Type and Equivalence Ratio in Flame Spray Process, Journal of ILASS-Korea, Vol. 18, No. 4, pp. 202-208 https://doi.org/10.15435/JILASSKR.2013.18.4.202
- Lee, Y. B., N. I. Cho, and K. E. Park(1996), A study on surface fatigue crack behavior of SS400 weldment, Journal of KWS, Vol. 14, No. 2, pp. 90-95
- Ministry of Knowledge Economy(2011), Greenhouse gases.energy management systems in the shipbuilding industry standard manual, pp. 1-271
- Moon, H. C., C. B. Sun, G. D. Lee, B. H. Ahn, L. T. Lim, and S. S. Hong(1999), Catalytic Reduction of Nitric Oxide by Carbon Monoxide over Perovskite-Type Oxide, J. Korean Ind. Eng. Chem., Vol. 10, No. 3, pp. 407-414
- Nan(2021), Ladipo market explosion caused by acetylene gas - LPG retailers, https://guardian.ng/news/nigeria/ladipo-market-explosion-caused-by-acetylene-gas-lpg-retailers/.
- Park, D. B., B. K. Cho, Y. J. Chang, and C. H. Jeon (2008), The Impact Equivalence Ratio and Fuel-Air Unmixedness on NOx Emission Characteristics, Trans. Korean Soc. Mech. Eng. spring conference, pp. 376-380.
- Park, M. H., J. P. Lee, B. J. Jin, I. J. Kim, J. S. Kim, and I. S. Kim(2017), An Experiment Study for Hardness Characteristic of Weldment according to Welding Heat-Input of Vertical GMA Welding Process, Journal of Welding and Joining, Vol. 35, No. 2, pp. 35-42.
- Yoon J. H. and B. S. Lee(2003), The application of small specimen technique to the evaluation of tensile properties of the irradiated materials.