DOI QR코드

DOI QR Code

Continuous and discontinuous contact problem of a magneto-electro-elastic layer

  • Comez, Isa (Department of Civil Engineering, Karadeniz Technical University) ;
  • Karabulut, Pembe Merve (Department of Civil Engineering, Cankiri Karatekin University)
  • Received : 2021.07.27
  • Accepted : 2022.04.12
  • Published : 2022.07.10

Abstract

In this study, frictionless continuous and discontinuous contact problems of a magneto-electro-elastic layer in the presence of the body force were discussed. The layer was indented by a rigid cylindrical insulating punch and supported by a rigid substrate without bond. Applying the Fourier integral transform technique, the general expressions of the problem were derived in the presence of body force. Thanks to the boundary conditions, the singular integral equations were obtained for both the continuous and the discontinuous contact cases. Gauss-Chebyshev integration formulas were used to transform the singular integral equations into a set of nonlinear equations. Contact width under the punch, initial separation distance, critical load, separation regions and contact stress under the punch and between the layer, and substrate were given as a result.

Keywords

References

  1. Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng. Mech., 54(1), 69-85. https://doi.org/10.12989/sem.2015.54.1.069.
  2. Birinci, A. and Erdol, R. (2003), "A frictionless contact problem for two elastic layers supported by a Winkler foundation", Struct. Eng. Mech., 15(3), 331-344. https://doi.org/10.12989/sem.2003.15.3.331.
  3. Cakiroglu, A.O. and Cakiroglu, F.L. (1991), "Continuous and discontinuous contact problems for strips on an elastic semi-infinite plane", Int. J. Eng. Sci., 29(1), 99-111. https://doi.org/10.1016/0020-7225(91)90080-M.
  4. Civelek, M.B., Erdogan, F. and Cakiroglu, A.O. (1978), "Interface separation for an elastic layer loaded by a rigid stamp", Int. J. Eng. Sci., 16(9), 669-679. https://doi.org/10.1016/0020-7225(78)90044-7.
  5. Comez, I. (2019), "Continuous and discontinuous contact problem of a functionally graded layer pressed by a rigid cylindrical punch", Eur. J. Mech.-A/Solid., 73, 437-448. https://doi.org/10.1016/j.euromechsol.2018.10.008.
  6. Comez, I., Guler, M.A. and El-Borgi, S. (2020), "Continuous and discontinuous contact problems of a homogeneous piezoelectric layer pressed by a conducting rigid flat punch", Acta Mechanica, 231(3), 957-976. https://doi.org/10.1007/s00707-019-02551-3.
  7. Comez, I., Guler, M.A. and El-Borgi, S. (2020), "Continuous and discontinuous contact problems of a homogeneous piezoelectric layer pressed by a conducting rigid flat punch", Acta Mechanica, 231(3), 957-976. https://doi.org/10.1007/s00707-019-02551-3.
  8. Comez, I. (2021), "Frictional moving contact problem of a magneto-electro-elastic half plane", Mech. Mater., 154, 103704. https://doi.org/10.1016/j.mechmat.2020.103704.
  9. El-Borgi, S., Usman, S. and Guler, M.A. (2014), "A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate", Int. J. Solid. Struct., 51(25-26), 4462-4476. https://doi.org/10.1016/j.ijmecsci.2016.01.022.
  10. El-Borgi, S. and Comez, I. (2017), "A receding frictional contact problem between a graded layer and a homogeneous substrate pressed by a rigid punch", Mech. Mater., 114, 201-214. https://doi.org/10.1016/j.mechmat.2017.08.003.
  11. Elloumi, R., Guler, M.A., Kallel-Kamoun, I. and El-Borgi, S. (2013), "Closed-form solutions of the frictional sliding contact problem for a magneto-electro-elastic half-plane indented by a rigid conducting punch", Int. J. Solid. Struct., 50(24), 3778-3792. https://doi.org/10.1016/j.ijsolstr.2013.07.014.
  12. Elloumi, R., Kallel-Kamoun, I., El-Borgi, S. and Guler, M.A. (2014), "On the frictional sliding contact problem between a rigid circular conducting punch and a magneto-electro-elastic half-plane", Int. J. Mech. Sci., 87, 1-17. https://doi.org/10.1016/j.ijmecsci.2014.04.024.
  13. Elloumi, R., El-Borgi, S., Guler, M.A. and Kallel-Kamoun, I. (2016), "The contact problem of a rigid stamp with friction on a functionally graded magneto-electro-elastic half-plane", Acta Mechanica, 227(4), 1123-1156. https://doi.org/10.1007/s00707-015-1504-2.
  14. Erdogan, F. (1978), "Mixed boundary value problems in mechanics", Mechanics Today, Pergamon Press, Oxford, England.
  15. Giannakopoulos, A.E. and Suresh, S. (1999), "Theory of indentation of piezoelectric materials", Acta Materialia, 47(7), 2153-2164. https://doi.org/10.1016/S1359-6454(99)00076-2.
  16. Giannakopoulos, A.E. and Parmaklis, A.Z. (2007), "The contact problem of a circular rigid punch on piezomagnetic materials", Int. J. Solid. Struct., 44(14-15), 4593-4612. https://doi.org/10.1016/j.ijsolstr.2006.11.040.
  17. Hou, P.F. and Zhang, W.H. (2020), "The electro-mechanics of a coating/substrate system under charged spherical contact", Math. Mech. Solid., 25(1), 60-96. https://doi.org/10.1177/1081286519865773.
  18. Karabulut, P.M., Adiyaman, G. and Birinci, A. (2017), "A receding contact problem of a layer resting on a half plane", Struct. Eng. Mech., 64(4), 505-513. https://doi.org/10.12989/sem.2017.64.4.505.
  19. Kaya, Y., Polat, A. and Ozsahin, T.S. (2020), "Analytical and finite element solutions of continuous contact problem in functionally graded layer", Eur. Phys. J. Plus, 135(1), 1-21. https://doi.org/10.1140/eqjp/s.13360-020-00138-9.
  20. Ke, L.L., Wang, Y.S., Yang, J. and Kitipornchai, S. (2010), "Sliding frictional contact analysis of functionally graded piezoelectric layered half-plane", Acta Mechanica, 209(3), 249-268. https://doi.org/10.1007/s00707-009-0181-4.
  21. Krenk, S. (1975), "On the use of the interpolation polynomial for solutions of singular integral equations", Quart. Appl. Math., 32(4), 479-484. https://doi.org/10.1090/qam/474919.
  22. Liu, Z., Yan, J. and Mi, C. (2018), "On the receding contact between a two-layer inhomogeneous laminate and a half-plane", Struct. Eng. Mech., 66(3), 329-341. https://doi.org/10.12989/sem.2018.66.3.329.
  23. Ma, J., Ke, L.L. and Wang, Y.S. (2014), "Electro-mechanical sliding frictional contact of a piezoelectric half-plane under a rigid conducting punch", Appl. Math. Model., 38(23), 5471-5489. https://doi.org/10.1016/j.apm.2014.04.039.
  24. Patra, R., Barik, S.P. and Chaudhuri, P.K. (2017), "Frictionless contact of a rigid punch indenting an elastic layer having piezoelectric properties", Acta Mechanica, 228(2), 367-384. https://doi.org/10.1007/s00707-016-1700-8.
  25. Parel, K.S. and Hills, D.A. (2016), "Frictional receding contact analysis of a layer on a half-plane subjected to semi-infinite surface pressure", Int. J. Mech. Sci., 108, 137-143. https://doi.org/10.1016/j.ijmecsci.2016.01.022.
  26. Polat, A., Kaya, Y. and Ozsahin, T.S. (2018), "Analytical solution to continuous contact problem for a functionally graded layer loaded through two dissimilar rigid punches", Meccanica, 53(14), 3565-3577. https://doi.org/10.1007/s.11012-018-0902-7.
  27. Su, J., Ke, L.L., El-Borgi, S., Xiang, Y. and Wang, Y.S. (2018), "An effective method for the sliding frictional contact of a conducting cylindrical punch on FGPMs", Int. J. Solid. Struct., 141, 127-136. https://doi.org/10.1016/j.ijsolstr.2018.02.017.
  28. Wang, B.L. and Han, J.C. (2006), "A circular indenter on a piezoelectric layer", Arch. Appl Mech., 76(7), 367-379. https://doi.org/10.1007/s00419-006-0029-5.
  29. Wu, Y.F., Yu, H.Y. and Chen, W.Q. (2012), "Indentation responses of piezoelectric layered half-space", Smart Mater. Struct., 22(1), 015007. https://doi.org/10.1088/09641726/22/1/015007.
  30. Yan, J. and Li, X. (2015), "Double receding contact plane problem between a functionally graded layer and an elastic layer", Eur. J. Mech.-A/Solid., 53, 143-150. https://doi.org/10.1016/j.euromechsol.2015.04.001.
  31. Yan, J. and Mi, C. (2017), "Double contact analysis of multilayered elastic structures involving functionally graded materials", Arch. Mech., 69(3), 199-221.
  32. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241.
  33. Yaylaci, M. and Birinci, A. (2015), "Analytical solution of a contact problem and comparison with the results from FEM", Struct. Eng. Mech., 54(4), 607-622. https://doi.org/10.12989/sem.2015.54.4.604.
  34. Yaylaci, M., Adiyaman, G., Oner, E. and Birinci, A. (2021), "Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM", Comput. Concrete, 27(3), 199-210. http://doi.org/10.12989/cac.2021.27.3.199.
  35. Yilmaz, K.B., Comez, I., Yildirim, B., Guler, M.A. and El-Borgi, S. (2018), "Frictional receding contact problem for a graded bilayer system indented by a rigid punch", Int. J. Mech. Sci., 141, 127-142. https://doi.org/10.1016/j.ijmecsci.2018.03.041.
  36. Zhou, Y.T. and Lee, K.Y. (2012), "Contact problem for magneto-electro-elastic half-plane materials indented by a moving punch. Part I: closed-form solutions", Int. J. Solid. Struct., 49(26), 3853-3865. https://doi.org/10.1016/j.ijsolstr.2012.08.017.
  37. Zhou, Y.T. and Kim, T.W. (2014), "An exact analysis of sliding frictional contact of a rigid punch over the surface of magneto-electro-elastic materials", Acta Mechanica, 225(3), 625-645. https://doi.org/10.1007/s00707-013-0992-1.
  38. Zhou, Y.T. and Zhong, Z. (2014), "Frictional indentation of anisotropic magneto-electro-elastic materials by a rigid indenter", J. Appl. Mech., 81(7), 071001. https://doi.org/10.1015/1.4026795.
  39. Zhou, Y.T. and Kim, T.W. (2015), "Dynamic contact modeling of anisotropic magneto-electro-elastic materials with volume fraction changes", Compos. Struct., 131, 1099-1110. https://doi.org/10.1016/j.compstruct.2015.07.001.