DOI QR코드

DOI QR Code

A Proposal for Partial Automation Preparation System of BIM-based Energy Conservation Plan - Case Study on Automation Process Using BIM Software and Excel VBA -

BIM기반 에너지절약계획서 건축부문 부분자동화 작성 시스템 제안 - BIM 소프트웨어와 EXCEL VBA를 이용한 자동화과정을 중심으로 -

  • 류재호 (서울과학기술대학교 건축학부) ;
  • 황종민 (서울과학기술대학교 건축학부 건축공학전공) ;
  • 김솔이 (서울과학기술대학교 건축학부 건축공학전공) ;
  • 서화영 (서울과학기술대학교 건축학부 건축공학전공) ;
  • 이지현 (서울과학기술대학교 건축학부 건축공학전공)
  • Received : 2021.12.23
  • Accepted : 2022.05.26
  • Published : 2022.06.30

Abstract

The main idea of this study is to propose a BIM-based automation system drawing up a report of energy conservation plan in the architecture division. In order to obtain a building permit, an energy conservation plan must be prepared for buildings with a total floor area of 500m2 or more under the current law. Currently, it is adopted as a general method to complete a report by obtaining data and drawings necessary for an energy conservation plan through manual work and input them directly into the verification system. This method takes a lot of effort and time in the design phase which ultimately increases the initial cost of the business, including the services of companies specialized in the environmental field. However, in preparation for mandatory BIM work process in the future, it is necessary to introduce BIM-based automatic creation system that has an advantage for shortening the whole process to enable rapid permission of energy-saving designs for buildings. There may be many methods of automation, but this study introduces how to build an application using Dynamo of Revit, in terms of utilizing BIM, and write an energy conservation plan by automatic completion of report through Dynamo and Excel's VBA algorithm, which can save time and cost in preparing the report of energy conservation plan compared with the manual process. Also we have insisted that the digital transformation of architectural process is a necessary for an efficient use of our automation system in the current energy conservation plan workflow.

Keywords

Acknowledgement

본 프로젝트에 대하여 고견 및 경험을 공유하고 귀한 시간을 할애하여 자문해주신 (주)상상진화 기술연구소의 김명환 기술이사, 한국에너지공단 녹색건축센터 건물에너지실의 정준수 대리와 (주)위드웍스 에이앤이건축사사무소의 이지용 멘토에게 감사를 표합니다.

References

  1. Autodesk Revit Knowledge Web site, https://knowledge.autodesk.com/ko/support/Revit/learn/caas/qsarticles/keyRevit-concepts.html
  2. Chin, S. Y. (2020). Storytelling Building Information Modeling, CIRCOM
  3. Cho, G. H., Kim, J. Y., Kim, K. A., Seo, J. C., Lee, A. Y., Jeong, Y. K. (2018). Development of BIM Based EPI Evaluation Automation, Symposium of Architectural Institute of Korea, 38(1), p. 744
  4. Choi, C. H. (2017). Development of BIM based Platform for Evaluation of Energy Saving Design Criteria, Final Report of Ministry of Science and ICT
  5. Choi, C. H., Kwon, D. Y., Cho, S. H., Kim, J. H. (2020). An Automated Process to Produce Shop Drawings for MEP Works in BIM Environment, Journal of KIBIM, 10(4), pp. 22-31. https://doi.org/10.13161/KIBIM.2020.10.4.022
  6. GABC. (2021). 2021 GLOBAL STATUS REPORT FOR BUILDINGS AND CONSTRUCTION
  7. Imagine Builder Web Site. https://www.imbu.co.kr/imbuproducts/#tab-id-5-active
  8. Jung, Y. S. (2020). Development of National-Level Bottom-up Greenhouse Gas Emission Projection and Potential Reduction Analysis Technology for the Building Sector in Response to the New Climate System, Final Report of Urban & Architecture Research Project of Korea Agency for Infrastructure Technology Advancement
  9. Jeong, Y. S., Cho, S. H. (2020). Post-2020 Greenhouse Gas Emission Projection in Building Sector, Journal of AIK, 36(10), pp. 117-125.
  10. Kim, J. M. (2016). Analysis on Issues in Energy Saving Standard for Buildings and Improvement Measures, Master Thesis, Chung-Ang University
  11. Kim, J. Y., Kim, J. H, Cho, Y. Y., Kim, Y .I., Jeong, G. S. (2016). A Study on the Correlation of Building Energy Efficiency Rating with Energy Performance Index in Non-Residential Buildings, Symposium of SAREK, pp. 90-93.
  12. Kim, T. H. (2018). South Korea's building sector GHG Emission Status Analysis, Korean Environmental Industry & Technology Institute
  13. Kim, Y. B. (2021). Greenhouse gas reduction target for 2050 and carbon-neutral policy measures in the building sector, Korea Research Institute for Human Settlements, 2021.09, pp. 12-19.
  14. Kim, Y. J, Kim, I. C., Chin, S. Y. (2020). Developing a Drawing Template for BIM software to Improve BIM based Drawing Work Efficiency in the Construction Document Phase, Journal of KIBIM, 10(4), pp. 98-109. https://doi.org/10.13161/KIBIM.2020.10.4.098
  15. Korean Energy Agency. (2017). Explanatory note on energy-saving design standards for buildings
  16. Korean Energy Agency. (2019). Energy Conservation Plan FAQ If you know this, you will do as much as Manager Kim of the review organization!
  17. Korean Energy Agency. Building Energy Conservation Plan Work Process, https://www.energy.or.kr/web/kem_home_new/ener_efficiency/building_03.asp
  18. Korean Law Information Center. https://www.law.go.kr/
  19. Lee, D. H. (2015). Automatic check of energy conservation plan using open BIM, Master Thesis, Sungkyunkwan University
  20. Lee, G. W. (2014). Analysis and Development Measures in Application of Architectural Items to the Energy Saving Planning, Master Thesis, Daejin University
  21. Lee, Y. G. (2015). EnergyInfo, Development of BIM-based real-time type performance automatic calculation technology for Energy Conservation Plan, Industry-University-Research Cooperation Technology Development Project
  22. Moon, H. J. (2011). Development of BIM based Simulation Technology and Design Supporting system for High Building Energy Performance, Final Report of Ministry of Science and ICT
  23. National Greenhouse Gas Emission Statistics. https://www.gihoo.or.kr/portal/kr/biz/inventory.do
  24. Office VBA Reference. https://docs.microsoft.com/ko-kr/office/vba/api/overview/
  25. Solideo Systems Consortium. Energy Conservation Plan Online Review System Manual
  26. The 2050 Carbon Neutrality and Green Growth Commission. https://www.2050cnc.go.kr/
  27. The Dynamo Primer manual web site. https://primer.dynamobim.org/