Acknowledgement
본 연구는 2022년도 산업통상자원부 및 산업기술평가관리원(KEIT) 연구비 지원에 의한 연구(20016465와 20017189)와 2022년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구(P0008458, 2022년 산업혁신인재성장지원사업) 결과로 수행되었습니다.
References
- J. W. Yoon, J. W. Kim, J. M. Koo, S. S. Ha, B. I. Noh, W. C. Moon, J. H. Moon, and S. B. Jung, "Flip-chip Bonding Technology and Reliability of Electronic Packaging (in Kor.)", J. Korean Weld. Join. Soc., 25(2), 6-15 (2007).
- G. Kim, K. Son, G. T. Park, and Y. B. Park, "Effect of Current Densities on the Electromigration Failure Mechanisms of Flip-Chip Sn-Ag Solder Bump (in Kor.)", Korean J. Met. Mater., 55(11), 798-805 (2017). https://doi.org/10.3365/KJMM.2017.55.11.798
- G. T. Park, B. R. Lee, J. B. Kim, K. Son and Y. B. Park, "Solder Volume Effect on Electromigration Failure Mechanism of Cu/Ni/Sn-Ag Microbumps", IEEE Trans. Comp. Packag. Manuf. Technol., 10(10), 1589-1593 (2020). https://doi.org/10.1109/tcpmt.2020.3005644
- Y. W. Chang, S.H. Chiu, and C. Chen, "Investigation of Void Nucleation and Propagation in the Joule Heating Effect During Electromigration in Flip-Chip Solder Joints", J. Electron. Mater., 39(11), 2489-2494 (2010). https://doi.org/10.1007/s11664-010-1361-7
- B. R. Lee, J. M. Park, Y. K. Ko, C. W. Lee, and Y. B. Park, "Effect of Solder Structure on the In-situ Intermetallic Compounds growth Characteristics of Cu/Sn-3.5Ag Microbump (in Kor.)", J. Microelectron. Packag. Soc., 20(3), 45-51 (2013). https://doi.org/10.6117/KMEPS.2013.20.3.045
- H. H. Kim, D. H. Kim, J. B. Kim, H. J. Kim, J. U. Ahn, I. S. Kang, J. K. Lee, H. S. Ahn and S. Kim, "The Effects of UBM and SnAgCu Solder on Drop Impact Reliability of Wafer Level Package (in Kor.)", J. Microelectron. Packag. Soc., 17(3), 65-69 (2010).
- M. Liebens, J. Slabbekoorn, A. Miller, E. Beyne, M. Stoerring, S. Hiebert, and A. Cross, "Defect earning methodology applied to microbump process at 20 ㎛ pitch and below", Proc. 29th Annual SEMI Advanced Semiconductor Manufacturing Conference, New York (2018).
- H. Ryu, B. R. Lee, J. B. Kim, and Y. B Park, "Effect of NCF Trap on Electromigration Characteristics of Cu/Ni/Sn-Ag Microbumps (in Kor.)", J. Microelectron. Packag. Soc., 25(4), 83-88 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.083
- B. H. Kwak, M. H. Jeong, and Y. B. Park, "Effect of Intermetallic Compounds Growth Characteristics on the Shear Strength of Cu pillar/Sn-3.5Ag Microbump for a 3-D Stacked IC Package (in Kor.)", Korean J. Met. Mater., 50(10), 775-783 (2012). https://doi.org/10.3365/kjmm.2012.50.10.775
- H. H. Hsu, S. Y. Huang, T. C. Chang, and A. T. Wu, "Nucleation and Propagation of Voids in Microbumps for 3 Dimensional Integrated Circuits", Appl. Phys. Lett., 99(25), 251913 (2011). https://doi.org/10.1063/1.3671391
- J. B. Kim, B. R. Lee, S. H. Kim, J. M. Park, and Y. B. Park, "Interfacial Reaction Characteristics of Au stud/Sn/Cu Pillar Bump during Annealing and Current Stressing", J. Nanosci. Nanotechnol., 15(11), 8725-8230 (2015). https://doi.org/10.1166/jnn.2015.11503
- K. Sakuma, P. S. Andry, B. Dang, J. Maria, C. K. Tsang, C. Patel, S. L. Wright, B. Webb, E. Sprogis, S. K. Kang, R. Polastre, R. Horton, and J. U. Knickerbocker, "3D Chip Stacking Technology with Low-Volume Lead-Free Interconnections", Proc. 57th Electronic Components and Technology Conference(ECTC), Nevada, IEEE (2007).
- Y. M. Kim, K. M. Harr, and Y. H. Kim, "Mechanism of the Delayed Growth of Intermetallic Compound at the Interface between Sn-4.0Ag-0.5Cu and Cu-Zn Substrate", Electron. Mater. Lett., 6(4), 151-154 (2010). https://doi.org/10.3365/eml.2010.12.151
- B. Lee, J. Park, S. J. Jeon, K. W. Kwon, and H. J. Lee, "A Study on the Bonding Process of Cu Bump/Sn/Cu Bump Bonding Structure for 3D Packaging Applications", J. Electrochem. Soc., 157(4), H420-H424 (2010). https://doi.org/10.1149/1.3301931
- Y. S. Lai, Y. T. Chiu, and J. Chen, "Electromigration Reliability and Morphologies of Cu Pillar Flip-Chip Solder Joints with Cu Substrate Pad Metallization", J. Electron. Mater., 37(10), 1624-1630 (2008). https://doi.org/10.1007/s11664-008-0515-3
- B. J. Kim, G. T. Lim, J. Kim, K. Lee, Y. B. Park, and Y. C. Joo, "Intermetallic Compound and Kirkendall Void Growth in Cu Pillar Bump During Annealing and Current Stressing", Proc. 58th Electronic Components and Technology Conference(ECTC), Florida, IEEE (2008).
- D. Q. Yu, C.M.L. Wu, D.P. He, N. Zhao, L. Wang, and J. K. L. Lai, "Effects of Contents in Sn-Cu Solder on the Composition and Morphology of Intermetallic Compounds at Solder/ Ni interface", J. Mater. Res., 20(8), 2205-2212 (2005). https://doi.org/10.1557/jmr.2005.0275
- M. O. Alam and Y. C. Chan, "Solid-state Growth Kinetics of Ni3 Sn4 at the Sn-3.5Ag Solder/Ni interface", J. Appl. Phys., 98(12), 123527 (2005). https://doi.org/10.1063/1.2149487
- G. T. Park, B. R. Lee, K. Son, and Y. B. Park, "Ni Barrier Symmetry Effect on Electromigration Failure Mechanism of Cu/Sn-Ag Microbump", Electron. Mater. Lett., 15(2), 149-158 (2019). https://doi.org/10.1007/s13391-018-00108-5
- K. Yamanaka, T. Nejime, and T. Ooyoshi "Effect of Underfill on Electromigration Lifetime in Flip Chip Joints", J. Alloy. Compd. 481(1-2), 659-669 (2009). https://doi.org/10.1016/j.jallcom.2009.03.063
- B. I. Noh, J. B. Lee, and S. B. Jung, "Characteristic of Underfill with Various Epoxy Resin (in Kor.)", J. Microelectron. Packag. Soc., 13(3), 39-45 (2006).
- K. Yamanaka, Y. Tsukada, and K. Suganuma, "Solder electromigration in Cu/In/Cu flip chip joint system", J. Alloy. Compd., 437(1), 186-190 (2007). https://doi.org/10.1016/j.jallcom.2006.07.125
- H. Peng and R. W. Johnson, "Underfilling Fine Pitch BGAs", IEEE Trans. Electron. Packag. Manuf., 24(4), 293-299 (2001). https://doi.org/10.1109/6104.980038
- M. J. Yim and K. W. Paik, "Design and understanding of anisotropic conductive films (ACFs) for LCD packaging", IEEE Trans. Compon. Packag. Manuf. Technol., A, 21(2), 233-242 (1998). https://doi.org/10.1109/3476.720422
- S. T. Lu, Y. M. Lin, C. C. Chuang, T. H. Chen, and W. H. Chen, "Development of a Novel Compliant-Bump Structure for ACA-Bonded Chip-on-Flex (COF) Interconnects with Ultra-Fine Pitch", IEEE Trans. Compon. Packag. Manuf. Technol., 1(1), 33-42 (2011). https://doi.org/10.1109/TCPMT.2010.2101431
- K. Honda, A. Nagai, M. Satou, S. Hagiwara, S. Tuchida, and H. Abe, "NCF for pre-applied process in higher density electronic package including 3D-package", Proc. 62th Electronic Components and Technology Conference (ECTC), San Diego, 385-392 (2012).
- B. G. Kim, S. C. Kim, W. G. Dong, and Y. H. Kim, "The effect of fillers in nonconductive adhesive on the reliability of chip-on-glass bonding with Sn/Cu bumps", Mater. Trans., 52(11), 2106-2110 (2011). https://doi.org/10.2320/matertrans.M2011207
- S. M. Lee, B. G. Kim, and Y. H. Kim, "Non-conductive adhesive (NCA) trapping study in chip on glass joints fabricated using Sn bumps and NCA", Mater. Trans., 49(9) 2100-2106 (2008). https://doi.org/10.2320/matertrans.MRA2008071
- S. C. Kim and Y. H. Kim, "Low temperature chip on film bonding technology for 20 ㎛ pitch applications", J. Mater. Sci. Mater. Electron., 27(4), 3658-3667 (2016). https://doi.org/10.1007/s10854-015-4205-7
- H. Ryu, K. Son, J. S. Han, T. K. Lee, and Y. B. Park "The role of a nonconductive film(NCF) on Cu/Ni/Sn-Ag micro-bump interconnect reliability", J. Mater. Sci. Mater. Electron., 31(18), 15530-15538 (2020). https://doi.org/10.1007/s10854-020-04115-x
- J. B. Kim, S.H. Kim, and Y. B. Park, "Intermetallic Compound Growth Characteristics of Cu/Ni/Au/Sn-Ag/Cu Micro-Bump for 3-D IC Packages (in Kor.)", J. Microelectron. Packag. Soc., 20(2), 59-64 (2013). https://doi.org/10.6117/KMEPS.2013.20.2.059
- C. W. Chang, C. E. Ho, S. C. Yang, and C. R. Kao, "Kinetics of AuSn4 Migration in Lead-Free Solders", J. Electron. Mater., 35(11) 1948-1954 (2006). https://doi.org/10.1007/s11664-006-0298-3
- E. C. C. Yeh, W. J. Choi, and K. N. Tu, "Current-crowding-induced electromigration failure in flip chip solder joints", Appl. Phys. Lett., 80(4), 580-582 (2002). https://doi.org/10.1063/1.1432443
- D. H. Eaton, J. D. Rowatt, and W. J. Dauksher, "Geometry effects on the electromigration of eutectic Sn/Pb flip-chip solder bump", Proc. IEEE Int. Reliab. Phys. Symp., San Jose, 243-249 (2006).
- M. H. Jeong, J. W. Kim, B. H. Kwak, and Y. B. Park, "Effects of annealing and current stressing on the intermetallic compounds growth kinetics of Cu/thin Sn/Cu bump", Microelectronic Engineering 89(1), 50-54 (2012). https://doi.org/10.1016/j.mee.2011.04.025
- M. H. Jeong, J. M. Kim, S. Yoo, C. W. Lee, and Y. B. Park, "Effect of PCB Surface Finish Intermetallic Compound Growth Kinetics of Sn-3.0Ag-0.5Cu solder bump (in Kor.)", J. Microelectron. Packag. Soc., 17(1), 88-88 (2010).
- H. Yun Chen and C. Chen, "Kinetic study of the intermetallic compound formation between eutectic Sn-3.5Ag alloys and electroplated Ni metallization in flip-chip solder joints", J. Mater. Res., 27(8) 1169-1177 (2012). https://doi.org/10.1557/jmr.2012.22
- G. T. Lim, B. J. Kim, K. Lee, J. Kim, Y. C. Joo, and Y. B. Park, "Temperature Effect on Intermetallic Compound Growth Kinetics of Cu Pillar/Sn Bumps", J. Electron. Mater., 38(11) 2228-2233 (2009). https://doi.org/10.1007/s11664-009-0922-0
- S. H. Kim, B. R Lee, J. M. Kim, S. Yoo, and Y. B. Park, "Effects of PCB ENIG and OSP Surface Finishes on the Electromigration Reliability and Shear Strength of Sn-3.5Ag PB-Free Solder Bump (in Kor.)", Kor. J. Mater. Res., 24(3) 166-173 (2014). https://doi.org/10.3740/MRSK.2014.24.3.166